Sanitizer: Which Sanitizer Is Best For A Hot Tub Start
When setting up, you must ensure the water is adequately sanitized. This will kill any bacteria or other organisms that could cause illness. There are several different types of sanitizers you can use for this purpose.
Chlorine: is the most common type of sanitizer used in hot tubs. It is effective at killing bacteria and other organisms. However, it can also irritate your skin and eyes. Therefore, wear gloves and goggles when using chlorine-based sanitizers.
Bromine: is another type of sanitizer that is often used. It is less irritating to your skin than chlorine, but it can still be harmful if you do not use it properly. Bromine-based sanitizers also tend to be more expensive than chlorine-based ones.
What You Need To Know About Spas: Faqs
Have more questions about maintaining your hot tub or spa? Check out these Frequently Asked Questions or stop into any of Watsons nine superstore locations to speak with one of our experts.
- What chemicals are needed for a hot tub?
You’ll need chlorine and bromine. You may require other chemicals depending on your personal spa needs. Our team is here to help our customers search for the right personal spa products.
- Are hot tub chemicals harmful to you?
Nope! As long as you keep your spa chemicals within acceptable ranges, they’re perfectly safe.
- How soon can you use a hot tub after adding chemicals?
If you use chlorine in your hot tub, you’ll need to wait at least 24 hours before getting in the tub.
- How do you maintain chemicals in a hot tub?
You’ll need to use a hot tub chemical test kit to check your levels and ensure that everything is within a healthy range.
- How often should you check hot tub chemicals?
You’ll want to check the chemical levels in your hot tub 2-3 times per week on your own. Its best to have your chemical levels checked professionally at least once a month.
- How do I keep my hot tub water crystal clear?
Using a clarifier product and keeping your filter clean can both go a long way in helping you keep your spa water crystal clear.
Hot Tub Chemicals Guide
Explore our Hot Tub Chemicals Guide and find out everything you need to know from recommended chemical dosage amounts to chemical how-to guides.We recommend ClearWater® chemicals as they are continuously designed for and tested on Lay-Z-Spa® hot tubs. All dosage and application recommendations below are based on ClearWater® hot tub chemicals and you should always refer to instructions and warnings included with each product before using.
Read Also: How To Test The Salt Level In My Pool
Add Stabilizer If Needed
Adding a stabilizer, most commonly cyanuric acid, is critical for chlorine hot tubs that are outdoors. The stabilizer enables the chlorine to stay in the pool and keep doing its sanitizing job.
Keep in mind that some chlorine sanitizers, such as dichlor, already have stabilizers in them. So its not necessary to add it separately.
The ideal range for a stabilizer is between 30-50 ppm.
How To Start A Hot Tub Or Spa
- |April 13, 2021
Over time, no matter how much sanitizer is in the tub, the water becomes overloaded with pollutants and total dissolved solids .
This makes the water unsafe to bathe in, and at that point, youll have to drain the tub and start over.
If youve never done it before, youll learn its quite easy to do, and you wont have to pay a professional to stop by and care for your tub.
Skip to:
Recommended Reading: Hotels With Jacuzzi In Room Near Detroit
Recommended Reading: What Type Of Pool Is Best
Beginners Guide To Spa & Hot Tub Maintenance
We know here at Outdoor Living know that a hot tub is a significant investment, so why wouldn’t you arm yourself with all the information necessary to take care of your tub. This beginner’s guide will help you through your first steps in spa ownership and ensure you have all the knowledge needed to set up your hot tub or spa.
Draining Your Hot Tub
Over time your spa water will absorb minerals, chemicals, and other soluble materials, which will lead to an increase in Total Dissolved Solids . TDS reduces the efficiency of spa chemicals, making the water harder to maintain.
With the above in mind, The British and Irish Spa and Hot Tub Association advises that the change of water should ideally be done once every month, but it may be extended up to once every 3 to 4 months if tub usage is low. When doing so, it is a good idea to clean your hot tub pipework using Jacuzzi Pipe Cleaner to maintain clear, working pipes.
Read Also: What Size Pool Pump For 16×32 Inground Pool
Best Chemicals For Hot Tub Start Up
These pool Chemicals are exceptional For starting Up your hot tub! They are trusty, easy-to-use tools For starting Up your pool and keeping it healthy! You’ll find a variety of options For starting Up your pool, including chemicals, ucs, and amendments, whether you’re starting Up your pool For the first time, or you’ve been using these tools For a year and a half, these Chemicals will help you get started! This pool Start Up chemical kit comes with everything you need to Start Up your pool! This kit comes with the starting kit, tools, and a guidebook on how to Start Up your pool. You will also find a variety of Chemicals to Start Up your pool, the pool Start Up and maintenance chemical kit from new bowls is a simple set above ground pool new area kit that straightforward sets gallons of chemicals. This kit comes with a kit book and basic set above ground pool instructions, the kit can be used on standard pool sets or new area pools. New bowls also offers a pool repair service, this pool Chemicals kit is sensational For somebody scouring to get their pool Up and running – and/or maintaining it! This kit comes with everything you need to get your pool Up and running, from mix to mix! Plus, it comes with a guide to help you get your pool Up and running, and straightforward steps to take to get you there.
Learn More
Balance And Sanitize The Tub Water
Now that you have fresh, pre-filtered water in your hot tub and youve rinsed off the filter, now is the time to balance and sanitize your tubs water by adding the start-up chemicals. But, before you begin, make sure your hot tubs water reaches a temperature of at least 82º Fahrenheit. The heat of the water will help the pH balancers and other chemicals to dissolve more effectively.
The best way to start up your hot tub is with a Hot Tub Chemical Starter Kit. This all-in-one kit includes all the essential items you will need to start up your hot tub, including:
You May Like: How To Fix Leak In Swimming Pool Liner
Alternative Water Care Programs
If you want to try a different water care regimen than standard chlorine or bromine, there are a few products available. These are sometimes sold as natural or premium water care systems. There are several brand names available. These alternative solutions may or may not be more natural depending on how you look at them. However, they do take a somewhat different approach to inhibiting water-born contaminants. Some of these solutions are marketed as a technology that hinders bacterial growth by eradicating the food source. Others are sold as metal-based bacterial inhibitors. Most contain additional water conditioning agents that claim to help your water feel softer to your skin.
Tips for using alternative water care systems:
Sanitising The Hot Tub
After your hot tub has reached the recommended pH and alkalinity levels, the next step is to sanitise the hot tub and the water. There are many different types of sanitisers. The main forms of sanitisers are chlorine, bromine, minerals and salt systems. Each type of sanitiser comes with its own advantages and disadvantages.
Also Check: How To Find Leak In Pool Liner
Additional Systems For Maintaining Water Quality
Certain Aqua Living tubs come with ozone generators or chlorine generators. Ozone generators reduce the need for chemicals by reducing dissolved solids and increasing oxygen, while chlorine generators maintain chemistry by turning salt into a sanitizer.
While these systems replace some chemical usage, they do not do everything. Hot tubs with ozone systems will still need sanitizers, and hot tubs with chlorine generators will not necessarily get accurate readings on sanitation levels.
For more details on chemicals and your particular hot tub, contact your local Aqua Living dealer.
Help With Your Hot Tub
Contact us if you have any questions about the chemicals for your hot tub, whether its balancing your water, which ones you need, or how much to use with your specific spa.
Hot tub having an issue? We also do repairs! Want someone to open your hot tub for you? We can do that, too! Just fill out this form and well be in touch.
Also Check: What Should Hot Tub Temp Be
Hot Tub Chemical Handling
When handling any chemicals, please stick to the following guidelines:
Set The Water Temperature
Based on your personal preference, set the water temperature. The recommended hot tub water temperature is between 98 and 102 degrees Fahrenheit. Whatever you set your water temperature to, ensure to keep it consistent. If you reheat the water for every use, you risk stressing the heater and circuit board and increasing your electric bill.
Recommended Reading: What Is Low And Slow Pool Chemical
Chemical Handling & Storage
Ensuring yours and others safety when handling chemicals is highly important as failure to do so could cause serious harm or a fatality. Please, therefore, read the below instructions carefully on how to correctly store and handle chemicals.
Chemical Handling
Read Instructions Thoroughly On Each Product Before UseNever use unlabelled chemicals and please read the instructions before use. Avoid getting chemicals in eyes, on skin or on clothing. Avoid breathing vapours when opening a container. Avoid creation of dust. Never add water to the product. Always add product to large quantities of water. Use separate clean dry utensils for each chemical and clean after use. Do not add the product to any dispensing device containing residuals of other products.
Wear Protective ClothingWhen youre ready to begin mixing your chemicals, you should handle them with chemical resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. It is also advised to wear tightly sealed goggles and appropriate protective clothing such as long sleeves, trousers, and closed-toed shoes that fully protect your feet from spills. You should also wash your hands after handling chemicals.
Every attempt should be made to avoid mixing spilled material with other chemicals or debris when cleaning up. Do not attempt to reseal any contaminated drums. Do not transport wet or damp material.
Storing Chemicals
Remove Air From The Lines
From air locks to pump issues, air bubbles in your hot tubs plumbing can lead to a whole range of issues. How you go about this step is dependent on your hot tubs manufacturer and model some have self-priming features, others dont. Therefore, you should consult your owners manual to find out how to go about completing this essential step.
Read Also: How Deep Can An Above Ground Pool Be
What Chemicals Should I Put In My Hot Tub For The First Time
Hot tubs are an amazing source of relaxation and leisure for people throughout the world. Whether you are using your brand new tub to relax tense muscles or just to simply destress from the day, you will want to make sure you are putting the right chemicals in the very first time you use it to ensure safety for you and your family.
The chemicals you will need to start your hot tub include a pH increaser, pH decreaser, calcium hardness, a metal removal and a sanitiser. The chemicals have to go in a certain order for the process to work. Your final goal should be to balance your pH level between 7.4 and 7.6 and your alkalinity between 100-200 parts per million.
If you just bought a brand new hot tub, chances are you are really excited about your new purchase and want to do everything you can to make it a safe and fun experience for you, your family and your guests. Keep reading to learn the exact chemicals, methods and tips for starting your hot tub for the first time.
While the chemicals youll need to add to your spa will depend on your situation, a basic list of chemicals every spa owner should have includes:
- Spa sanitiser such as bromine or chlorine.
- A pH increaser and decreaser such as FreshWater® pH/Alkalinity Up and FreshWater® pH/Alkalinity Down
- Spa shock solution, such as chlorine or MPS.
The Ultimate Hot Tub Set Up Guide For New Owners
Not sure what to do now that your hot tub has arrived? Of course we wish it were as simple as filling it with water and hopping in. However, it does take a little work to get your spa set up. Ive put together 7 easy steps on how to set up a hot tub.
Dont want to read? Print this Hot Tub Setup Guide!
You May Like: How Much To Screen In Pool
Well Water In A Hot Tub
If you have a hot tub supplied by a well, you may wonder if the water is safe to use. The short answer is yes, but there are a few things you should keep in mind.
Water can contain more minerals than municipal water, so its essential to test it regularly and adjust the pH as needed. It would be best if you also had your well inspected annually to ensure its in good working order.
Another thing to remember is that it requires more chemicals than pools, so youll need to use them more often when using healthy water. But with some extra care, you can enjoy it without any worries.
What Chemicals Are Needed To Start Up A New Hot Tub
Whether youre looking to wind down after a long day or calm tense muscles, a hot tub is undeniably an amazing source of relaxation and leisure. And if you have a brand new one, youll want to do everything right to make it safe for you and your family to use. So, how do you start up your new hot tub?
The chemicals you need to treat your new hot tub for the first time include a sanitizer like chlorine, an alkalinity increaser, and pH controllers. You also need a calcium hardness increaser to prevent corrosion. When adding chlorine granules, aim for a level of 5 to 8 ppm.
The amount of chemicals you add to your tub depends on the gallons of water your tub can hold, so check your tubs capacity and carefully review the spa chemical labels for the dosing information. Lets dive into the details.
You May Like: How To Remove Stains From Concrete Pool
Why Are Hot Tub Start Up Chemicals Important
In short, hot tub chemicals ensure the water stays clean and clear. If you dont use the necessary hot tub start up chemicals, you risk bacteria and other germs growing in the water. If this happens, you must drain the water and start over.
Proper spa chemicals also ensure the longevity of your hot tub. When the bacteria grow in the water, it can cause other tub parts to break down, resulting in unnecessary wear and tear. Show your hot tub how much you care by using the proper hot tub start up chemicals listed below.
Why Do I Need To Use Chemicals
Hot tub water that has been properly cared forSource:
Whether you have an indoor or outdoor hot tub and regardless of the model you have, there is a set of chemicals that you should use to clean the water.
According to investigations by the Centers for Disease Control and Prevention and National Center for Biotechnology Information, hot tubs can be a spot for breeding bacteria such as Legionella and Pseudomonas which lead to skin rashes, eyes, and ears infections.
Hot tub chemicals are aimed at making your hot tub a safe place after bathing by killing germs and contaminations that remain in the water. Nothing can be as effective in dealing with bacteria as chemicals.
Also, regular usage of chemicals will prolong your hot tubs life and save your money. Germs accumulated on hot tub parts and poor water balance can lead to corrosion of metal surfaces and early problems with hot tub hardware.
Recommended Reading: In Ground Hot Tub Cover
