How Many Lights Am I Going To Need
It subject to the type of light, it is suggested that one light, at the minimum, is going to adequately light up a pool up to thirty foot long. Pools longer than thirty feet are going to require two lights. Take heed that this is the smallest amount, most people end up getting two lights installed, and some even require to install three lights on larger pools. As of this post, full sized LED pool lights, like those that are usually installed in vinyl lined or concrete pools, typically cost between $1,000 and $1,500 installed.
- Smaller LED lights usually cost between $700 and $900 installed.
- Fiber optic pool lighting is typically around $1,300 to $1,700 installed.
- Full sized incandescent pool lighting is usually around $450 to $650.
What Should I Know About Pool Lights
Lighting your pool allows you to swim at nighttime with single or multi-colored ambient light. LED pool lighting enables you to change colors with ease, possibly with your smart phone. In-pool lighting is required to be installed during the pools construction. Small LED lights cost around $700$900 installed, and fiber optics cost about $1,300$1,700. The only necessary maintenance is bulb replacement.
Eurus Home Led Pool Lights
Available in 12V and 120V versions for improved compatibility, the Eurus Home LED pool light offers seven different colors of light to illuminate your pools water. You can program the colors by remote, so you wont need to keep flicking the power switch on and off dozens of times like with other models. However, the remote doesnt work if the bulb is in a metal housing or under three feet of water. Youll also need an antenna installed on the light.
Overall, liked the illumination produced by this bulb. Most of the colors were vibrant and bright, but the red was very dim and didnt provide much light at all. The bulb is protected by a one-year warranty in case anything goes wrong. However, that warranty doesnt cover water getting into the housing, which makes it much less worthwhile in our eyes. In the end, we dont think the Eurus Home light is one of the best underwater LED pool lights.
- Warranty doesnt cover water getting into the housing
- The red light is very dim
- Remote only works with antenna installed on light
Also Check: Decks With Hot Tub Ideas
Pool Light Replacement In Gilbert Az
Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, replacement, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs! Call us at for more information.
Fiber Optic Pool Lights
The initial cost is typically $9001500 on new construction. Because this system is above water level a fan is needed to cool the bulb. An electric motor is also used to rotate the color wheel that causes the light to change colors. These components do fail over time and will need to be replaced. The bulbs of fiber optic pool lights will typically last 37 years at a replacement cost of $200$300.
Advantage: LED pool lights
Don’t Miss: How To Get Rid Of Wasps In Pool
Incandescent And Halogen Pool Lights
Standard incandescent and halogen quartz pool lights are available and easily replaced. These have been a staple in pools and spas for years. Although halogen pool lights are a thing of the past the bulb and gaskets are still changed from time to time.
With the affordability of the standard incandescent pool lights and the ability to change out the bulb and gaskets when they go out, it still stands a purpose. The bulbs may not last as long, but the replacement bulb is the cheapest option if the fixture is still good compared to the LED light fixtures which does not have a realistic replacement bulb option as of now.
Why Should I Light My Pool
First and foremost, lighting your pool is going to allow you to fully take advantage of your pool throughout day and night. A lot of people find nighttime swimming soothing and relaxing, but its just not the same without the ambiance of reflective light that underwater lights provide. Lighting your inground pool also gives homeowners peace of mind when overseeing children swim at night because adds improved visibility throughout the whole pool.
Read Also: How Do I Increase The Ph In My Pool
Cnbrighter Led Underwater Pool Lights
Designed to run on DC 12V-24V circuits only, the CNBRIGHTER LED Underwater Pool Lights are small lights available in warm white, cool white, and blue hues. If you have a standard 120V circuit powering your current pool light, then youll need a transformer to convert to DC if you want to use the CNBRIGHTER lights. They are small and simple, offering just a single color each. You wont get any fancy colors or light shows, just a basic pool light. But because of this, theyre very inexpensive, one of the cheapest underwater LED options weve seen.
One of our concerns was the very short leads on this light. Wed prefer to get more length from them as it would make it much easier to work with. Another issue we had was poor longevity. We purchased several to begin with, but most of them stopped working within the first few months. While theyre not terribly expensive, the cost begins to multiply if you have to continually replace them. In the end, we dont think theyre a great option and wed recommend opting for something like the S.R. Smith pool light in our top position instead.
- No color options or light shows
Led White And Led Color Pool Lights
LED light technology has expanded the possibilities in lighting and continues to make incandescent a way of the past. It provides long lasting, low energy requirements, low heat emissions, colorchanging led light displays among other benefits. As the technology continues to improve Color LED add more new and exciting features.
These features include LED colorful lights which have no light bulb, no moving parts such as the color lights with color wheels of the past. LED lights are the brightest option for the swimming pools of today and some have wide angle settings which can illuminate rather than directly in front. LED come in white and color changing led lights and can operate with different settings that sync with pool automation or pool switches. You can directly manage the led colorful lights right from your phone app that can sync with both pool and spa lighting.
Read Also: How Much Alkalinity To Add To Pool
Replace Fiberstars Fiberoptic Inground Pool Light
lsuxtremist said:After reading this recommendation, others, and looking at this and looking into this option a bit more – is there any way of retrofitting the fiberoptic lights with somethign that does not cost $700+? It looks like this option involves a $200-300 light plus a Power Tower/Transformer for the light to plug into. One option appears to also need the “tower base” , though I am not sure if that is mandatory.My fiberoptic has never worked since we purchased the house and inherited the pool 3 years ago. We don’t really need the pool light that much and with other needs/expenses for the pool, spending $700 is not in the cards this year. I would love to get this fixed though. Maybe just wait until I can do it right with this equipment?
The tower is all you would need. Fibers dont fail, unless they were cracked
Troubleshooting Fiber Optic Pool Lights
In fiber optics, light is transmitted from one end of a thin piece of glass, called a silica, to the other end. Fiber optics are ideal because the light signal is stronger than on a standard metal circuit. That makes these lights ideal for swimming pools. Though a quality light source, fiber optics can still experience problems. If the fixture is cloudy, that means it is likely filled with water and the fiber optic lighting will need replacing. If this isn’t the problem, proceed to the next step. Locate the breaker box for the pool lighting system. This will be outside your home, somewhere in the pool area. Flip the main power supply switch to the “Off” position and open the breaker box panel. Wait for the meter to produce a reading.
- In fiber optics, light is transmitted from one end of a thin piece of glass, called a silica, to the other end.
- If the fixture is cloudy, that means it is likely filled with water and the fiber optic lighting will need replacing.
Related Articles
Read Also: What Size Pool Cartridge Filter Do I Need
How Do I Start Gathering Pool Lighting Ideas
You can find inspiration almost anywhere: our , , and more. And dont forget to check out your local swimming pool where you can see swimming pool lighting in person. We recommend creating an inspiration board to keep track of your favorite lighting ideas.
Add background lighting to showcase your yards best features
If youre looking for a way to add drama to your backyard décor, add lighting outsidethe pool, too. For example, a string of lights draped around a tree or around a garden area can add interest. You can also add rope lights or landscape lighting to gardens, pathways, or flower beds.
What Is Fiber Optic Pool Lighting
Fiber optic pool lights illuminate the pool with a dry box located outside of the water. This dry box is located within 10 to 12 feet from the pool, usually on a patio area. To light up your pool, the dry box houses the bulbs, which then allows light to travel through a fiber optic cable into a fitting in the pools wall.
Also Check: How Much To Get An Inground Pool
Star Floor Pool Lights And Well
Chromotherapy applied in wet areas with the soothing properties of warm water, the allure of underwater lighting and elegant styling combine to promote physiological well-being. Fiber optics are used in sensory lighting, which is linked to chromotherapy, also known as color therapy. Utilizing color in lighting has been very beneficial for increasing overall health and well-being. Chromotherapy is color therapy, and integrated with fiber optics gives our lighting choice a spectacular way to improve overall well-being. Chromotherapy or color therapy is a type of light therapy which helps to rebalance a person’s energy. It has the ability to affect mood, promote health and increase wellness.
Turn your hot tub or swimming pool into the Milky Way with LightEFX star pool lights
To request a quote or design consultation inquire here
-
Showing the single result
Bonbo Ycdbai1250 Led Pool Bulb
The Bonbo LED pool bulb is a basic underwater LED bulb with no extras or fancy light shows. You get white light only, but its bright enough to illuminate an entire pool. On top of this, its also affordably priced. Whether you need a 12V or 120V light, the Bonbo has you covered since its available in either configuration.
While we would have preferred a bit more versatility with some vibrant colors or light shows, thats not our biggest problem with the Bonbo pool bulb. What really bothered us was that it doesnt live up to the advertised lifespan of 30,000+ working hours. Ours never crossed the one-year mark. We had it replaced since it is protected by a one-year warranty. But the same problem occurred again. Within a year, our new bulb was dead. This seems to be a recurring issue, so we cant recommend the Bonbo bulb with such a poor lifespan.
- White only, no color options
- Doesnt live up to the advertised lifespan
Don’t Miss: How To Remove Pool Cover By Yourself
Fiberstars Lighting Parts Features
Pool lighting: the final touch in any top-shelf outdoor or indoor pool design. These lights, fixtures, covers, and motors are the components that make pools more aesthetically pleasing and safer to use all at once. Selecting pool lighting is a sensitive step in finalizing your pool configuration, because not all components are created equal. Pools are demanding environments, outdoor pools doubly so. It helps to start with a reliable brand.
Fiberstars is that brand. Their lighting components are noted for even lighting. The offer various colors and bulb types. Their fixtures are designed to handle immense stress, from both chemical exposure and the rigors of outdoor usage. They have options for above ground aesthetic lighting, including motors that spin filters across the light for a striking visual appeal. And they also have fully submersible fixtures that give off even light, making the entire swimming experience safe and reliable even at night. Here are some of the best components available in the Fiberstars lineup.
Fiberstars B10724 Fiber Glo Lens Only is a replacement lens for your fully submersible Fiber Glo lighting assembly. This lens projects clear, crisp light while still being hardy enough to stand up to the chemical exposure in properly maintained private pools. They are perfect for use as “beacons,” for tracking positioning while swimming underwater.
So How Do You Change From A Fiber Optic Light To A Led Light #
First, you should carefully remove the components placed in the current conduit. Some of them include the fiber optic bundles and the illuminator. Afterward, install the LED lights. Then connect them to the power source. You can always choose your preferred color of LED lights. They come in a wide array of colors. Alternatively, you can choose the color-changing LED lights. This is a popular option among most pool owners. Color changing LED lights to offer the perfect ambiance in your backyard.
Additionally, most manufacturers always provide an installation manual whenever you ask them to. If you plan to replace your fiber optic pool light with a LED light, you are on the right track. LED lights are more affordable and incur low maintenance costs.
Don’t Miss: How To Put In An Inground Pool
How Do You Replace A Fiber Optic Pool Light With An Led
Without a doubt, fiber optic pool lights can switch up your yard into a glowing oasis. Today, these pool lights are common among most homeowners due to their affordability and attractiveness. Fiber optic pool lights also increase swimming visibility at night. Typically, a fiber optic pool light has a bulb placed on the pool patio. It has a wire that transmits the light to a special box in the pool walls. This way, your pool stays lit at night.
At present, there is a broad spectrum of pool lights. LED lights are now the most popular pool lights. They are energy-saving and last for long compared to other types of pool lights. Although costly, LED lights offer value for money. As a result, most homeowners always seek to upgrade their pool lights from fiber-optic lights to LED lights. Luckily, the process of replacing a fiber optic light with a LED light is relatively easy.
What Is The Required Maintenance
The only maintenance required for any pool light is replacing the bulb. Regardless of the kind of light, you should never have the need to lower the pools water level for replacing the bulb. In many cases, it is simply loosening a single screw, pulling the bulb housing out of the water and replacing the bulb. The replacing only takes 5 to 10 minutes. Other types of lights, nevertheless, require that the entire housing be replaced, in which takes more time but still not a huge undertaking, especially bearing in mind the average bulb lasts for years and years. Replacing fiber optic bulbs is very easy as you just remove the box cover, located on or close to the patio, and put in a new bulb. Bulb replacement prices at the time of this post are as follows:
- Larger LED $450 to $650
- Smaller LED $50 to $350 subject to the model
- Fiber optics $20 to $60
- Incandescents $30 to $70
You May Like: How Much Does An Inground Pool Cost In Massachusetts
Inground Vs Above Ground
Your lighting needs and options will depend largely on whether you have an inground or swimming pool:
- If you need above ground pool lights, you have several options including magnetic lighting kits, wall-mounted kits, and kits that allow you to install lights via your pools vented return line.
- If your pool is inground, youll likely be looking at built-in, wall-mounted options. If your in-ground pool has features like stairs, ledges, or tanning shelves, you might want to add specially designed accent lighting in addition to your main pool lighting.
The Cons Of Fiber Optic Pool Lighting
Compared to LED pool lights, fiber optic pool lights are more costly. As mentioned in our LED pool lighting blog, LED units can range anywhere from $400-$900, whereas fiber optic pool lights can range anywhere from $900-$1,500. This is mainly due to the fan in the fiber optic housing system which cools the lights down. Also, fiber optic systems may have more parts to replace later down the road as well, driving the cost up even more. LED and fiber optic replacement bulbs both can range anywhere from $200-$400, but youll be replacing the fiber optic bulbs more often, costing you more money as well, which brings us to our next point.
Bulbs in fiber optic pool lighting are only supposed to last anywhere from 3 to 7 years. This is nothing compared to LED pool bulbs, which can last anywhere from 10 to 15 years.
To brighten up your entire pool at night with fiber optic pool lighting, you may need two fiber optic dry boxes because one can only light up so much pool at a time . In order to get the brightness of a LED unit, placing two fiber optic dry boxes may be needed if you are going for the total illumination effect.
Fiber optic pool lights are different than LEDs in that fiber optic pool lighting is more for an ambiance look for certain areas of your pool such as waterfalls and perimeters, not really to illuminate the entire pool.
Also Check: Can You Wear Contacts In The Pool
