Filling In An Inground Pool

Turn A Pool Into A Greenhouse

The cost to turn a pool into a greenhouse ranges from $10,000 to $35,000. Any structure you want to build where the pool was means completely removing it. Otherwise, a partial fill may not support the weight. Therefore, to build a greenhouse, you need to remove the pool and level the area first. A greenhouse can be erected in the area where the pool was located. In some rare situations, you may be able to keep the decking and use it as a surround for the greenhouse to cut costs down.

What Do You Do With A Filled In Pool

Now that the pool is filled in, what can you do with it? Keep in mind that you can only legally build over completely removed pools, not over partially removed pools.

Laws and regulations vary from city to city, but as a general rule, no dwellings are allowed on partially filled pools. You can usually use the area for lawn, flower beds, gardening, and, in some cases, sheds.

However, if a pool wasnt filled in properly, you may face a number of challenges. Lets review a few common filled-in pool problems.

How Much Should Cost To Get Rid Of The Pool

So, what they do is, call up the swimming pool removal company to get rid of the pool. But, getting rid of a swimming pool is also not that easy because they have to bear the cost of removal, the safety of the workers and their own family members. Getting a swimming pool is an expensive venture and getting rid of a swimming pool is even a bigger costly venture.

So, if you have a swimming pool at home, which you want to remove, then you must get ready to take this headache.

If you are thinking that draining the swimming pool and filling it up with dirt and debris is going to make it happen for you, then youre wrong. There is a lot attached to the swimming pool removal process, which only swimming pool experts and demolition contractors know.

Don’t Miss: Where To Get Cheap Pool Floats

Inground Pool Cost Estimator

When estimating the cost to build an inground pool, the main factors are the size, materials, location, and any custom upgrades. On average, expect to spend $50 to $100 per square foot to build a standard 14 by 28 size pool, or $125 to $150 per square foot for larger pools that have 9 to 12 foot deep ends.

Read Also: Pool Deck Paint Lowes

Partial Pool Removal Or Pool Fill

How it works:Note:Advantages:Disadvantages:

• This will be something you have to disclose to future buyers of the property, and it could affect the value of your home.
• If this method isn’t performed properly, there is an increased risk of sinkage, swelling, or lack of proper seepage.
• A majority of cities consider the area of the former pool to be non-buildable, meaning no additions or dwellings can exist there. However, the area is still suitable for sheds, concrete, landscaping, trees, etc.

Read Also: Is The Pool Open At Winstar

How To Determine The Cost Of A Partial Fill

Using a tape measure, measure the distance between the surface of your water and the top of the pool. If your pool is covered, take this measurement before you remove it. The tape measure end can be placed on the cover and then figure out how far it is from the top of the pool.

For example, if the distance from the cover to where you want to fill your water is 1.5 feet, put that number into the formula.

Cost To Fill In A Pool By Size

The size also impacts the removal cost, and there can be a very wide cost range for several reasons. The first is the depth. A pool that is 12×24 and 6 deep at its deepest will cost less to fill in than a 12×24 pool that is 12 deep at its deepest end. The pool type, fill-in type, such as partial or complete, soil type, and whether you finish the area with seed or sod also impact costs. Therefore, you will see overlapping costs for pools of various sizes. Below are the average ranges for common sizes.

Also Check: How To Clean Concrete Pool Deck

Cost To Remove An Inground Pool

The average cost to remove an inground pool is $4,000 to $16,000, depending on the size, depth, material, and accessibility. Partially filling in an inground pool costs $2,000 to $10,000 and involves demolishing the concrete and using the rubble as backfill.

Cost to Remove an Inground Pool

The pool’s material and access for equipment also affects the labor cost of removal.

• Concrete and gunite pools require larger, heavier equipment and cost more to remove. The concrete needs to be broken up into pieces and hauled away. For cheaper fill-ins, two to six holes are drilled through the bottom of the pool and filled with 18 pea gravel to facilitate drainage. The edges and sides of the concrete pool are demolished and used as backfill.
• Vinyl and fiberglass pools are typically less expensive to remove, but partial removal is not possible. The entire fiberglass shell must be broken-up and hauled away. For vinyl-lined pools, all the steel, aluminum, plywood, or concrete backing must be removed after an engineer deems it safe.

Option : Complete Pool Removal

How It’s Done:

The pool is drained, and all materials, like concrete/gunite, fiberglass, liner, re-bar, etc., are removed and hauled away.

The area is then filled with soil and/or gravel and compacted .

Pros of Complete Pool Removal:

• Although you will have to disclose that you fully removed a pool that was once on the property, it should have little to no impact on your home’s value.
• With no concrete buried in the old pool, the risk of sinkage and seepage is greatly reduced, even eliminated.

Cons of Complete Pool Removal:

• A majority of cities consider the area of the former pool to be non-buildable, meaning no additions or dwellings can exist there. However, the area is still suitable for sheds, concrete, landscaping, trees, etc.
• This option is more expensive than partial removal.

Read Also: How To Set Above Ground Pool

How Do You Get Rid Of A Swimming Pool

The process of filling in a pool involves draining the pool, punching holes in the bottom, demolishing the top layer of the pool, and then filling the hole with concrete. The concrete is then poured into the holes.

If youre doing this yourself, youll want to make sure that you have the right tools and materials. Youll also need to know how to use a sander and a sanding block to get the best results.

What Is A Pool Fill

A pool fill-in, also known as a partial pool removal, can be thought of as a quicker way of getting rid of an unwanted pool. In a traditional full pool removal, the pools entire shell is broken down, and then the debris hauled away before the space is filled in and finished.

With a fill-in, however, only the top part of the shell is broken down. This rubble is placed in what remains of the shell and then covered with dirt. This represents an easier and more affordable way for homeowners to reclaim their yard for another use. Here is a look at the steps involved in a pool fill-in.

Don’t Miss: Do Solar Rings Work To Heat Pool

How To Drain And Refill Your Swimming Pool

wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 19 people, some anonymous, worked to edit and improve it over time. This article has been viewed 659,050 times.Learn more

Swimming pool water can get bad over the years so bad that chemicals lose their effectiveness. With this information and a free weekend, you can drain and refill your pool without spending much more than $200 .

How Much Does It Cost

Simply call to schedule your pool filling with at least 48 hours notice. We will estimate the amount of water needed based on your pool measurements. On the day of the delivery, your first truck will show up at the scheduled time, park on the street and run a hose from the tanker truck to your pool.

Then the fun begins.

Our truck will begin pumping away filling your pool in just a short period of time. Once complete, the next truck will be dispatched. We use either a 4000 or 6200-gallon truck requiring at least two trips to smaller pools, more for larger. As the pool fills, our driver will watch for potential issues . Soon your pool will be full and ready for swimming .

Cleveland summers are short, and we recommend you not waste a single second of it. If you can buy more time by finding a better way to fill your pool, take it.

You May Like: How To Get Rid Of Black Birds Around Pool

It’s Not An Asset For Selling The House

In many cases, a well-constructed and maintained swimming pool is still considered a perk when it comes to listing your house for sale. But not if you have let it fall apart. Would you want to buy a house with a dilapidated pool in the backyard?

Check with local real estate agents and listings to see if pools in any condition really help or actually hinder the resale value of a home.

Cost Of Pool Maintenance Service

Are you paying $100 or so weekly for a pool service company to come by and clean out your pool, maybe check the filter and water levels? That’s $400 per month, which can be $5,200 per year if the pool water stays in the pool throughout the year. In three years, that’s $15,600 to keep the pool clean and maintain pH levels. Never mind repairs.

Maybe you do the pool maintenance. Would you rather be doing something else?

Also Check: Swimming Pool With Hot Tub

Problem : Messing Up A Partial Pool Removal

A partial pool removal, or pool fill-in, is the most common method for removing a pool. When you decide to move forward with DIY pool demolition, you may think this is a pretty simple job. Drain the pool and fill it in, right? Not exactly.

You have to make sure you put holes in the pool to allow for proper drainage, layer the remaining concrete properly, and fill the pool in with enough dirt and soil and proper compaction to make it secure. When this isnt done correctly, you could be dealing with swelling, sinking, and lack of seepage. This DIY pool removal method could leave you with a dangerous pit that could cave in at any moment or a giant pool full of mud.

Additionally, every city has certain requirements for how a pool should be removed, and many require permits. Often, when someone tries to DIY pool removal, they dont take the time to find out what the city requires to make their removal process legal and to code.

How Much Does It Cost To Fill A Pool With Water

Pool filling costs less than you think with all factors considered. The average homeowner uses about 12,000 gallons of water per month. The average pool is somewhere between 15,000- 30,000 gallons. Using that simple math, it stands to reason that your water bill will at least double when you fill your pool for the first time from a hose. For just a few more pennies per gallon, you could enjoy more time splashing with the family and alleviate any hassle associated with the task at hand.

You May Like: Who Makes The Best Pool Liners

Do You Need A Permit To Fill In A Pool

That depends on your local government, but in many cases, a permit is required.

The cost of a permit can be anywhere from free to several hundred dollars depending on your local municipality.

Many local governments have rules regarding how a pool must be removed. Some may have zoning ordinances or codes stating that a pool must be completely removed, not just filled in. If partial pool demolition and removal is allowed, there may be specific protocols on how the pool must be filled in

Pool Removal Cost Depends On Several Factors Like

• Size of the pool
• Accessibility of the pool area
• Method of pool removal
• The contractor you choose

The average cost to remove an inground pool ranges from $3,500 to $15,000 for a medium size pool with relatively easy access.

Costs can rise to well over $10,000 for a large pool with a large deck and difficult pool access.

The cost to remove an above ground pool varies considerablyâjust like inground pool removalâranging from a few hundred dollars to as much as $5,000 or more in some cases.

Learn more about the cost to remove a pool:

You May Like: Why Are Foam Pool Floats So Expensive

Backfill Tamp Backfill Tamp

In this phase of our DIY pool project, we will place our fill material into the trench around the pool, in phases all the way up to the top of the wall. First, push in about 1 ft of your material all around the pool. Then compact this initial layer, using either a gas-powered compactor or a heavy hand tamper. Youll find both to be a lot of work, but the gas-powered tamper will complete the job more quickly.

Go all the way around the pool all the material we just put in must be compacted fully. After the first layer is done, push in your next layer of material and compact it in the same manner as the first. Continue in this manner, one foot at a time, until you come within a foot of the top of your pool wall.

Also Check: Do Fire Departments Fill Swimming Pools

Pool Removal Saves Money

Pools are expensive. Seasonal maintenance, security requirements, liability concerns and increased taxes are all issues homeowners with a pool have to live with. Removing your pool will save you the ongoing maintenance fees as well as occasional repair and equipment costs. Property taxes and insurance premiums will go down. Liability due to possible injury or accidents on your property is reduced and you pick up additional impervious coverage for other things you may want to do on your property.

Also Check: How Much Should An Above Ground Pool Cost

What Is Backfilling A Pool

Backfill: to refill a previously excavated area with material.

Backfilling a pool is the process of filling the empty space left by the inground pool with gravel, sand, or dirt. Backfilling is just one part of the pool removal process. The concrete floor and walls of the pool must be broken up and/or removed prior to backfilling.

Backfilling costs vary based on the size of the pool and the material used. According to HomeAdvisor, The average price to remove a swimming pool falls between $3,000 and $10,000. The cost to eliminate an above ground model averages $2,700. An inground unit can be extracted for $9,000 to $19,000 or filled in for about $5,000.

There are different types of materials that can be used for backfilling a pool such as dirt, sand and gravel. We will describe each type of fill material in the process section of this article. We will also walk you through how to fill in an inground pool and how to DIY backfill a pool.

Problem : Not Properly Draining The Swimming Pool Before Removal

You may think that water is just water and you can just pump it out of the pool and let it go where it goes and be done with it, but that would be a mistake. Chlorine can damage the water system, go into nearby streams and rivers and kill aquatic life, or damage greenery and vegetation. You will need to know where you can drain the pool safely and legally, not just how to do it.

Also Check: Do It Yourself Inground Pool Kits

Cost To Fill In A Pool With Gravel

The cost of gravel for a pool fill is $5 to $8 a cubic yard delivered and poured. This is not the preferred material for most jobs because it is difficult to compact it tightly. However, some people use it as a base layer to cut the costs of the fill. This can be done with partial and complete fills. However, you should not fill the entire space with gravel because it settles more easily. This can lead to things like sinkholes over time. By mixing the gravel with dirt or other materials, you can get the compaction necessary for a long-lasting yard.

Additional Considerations And Costs

• Permit. You will need a permit for this project. Permit costs range from $50 to $250, depending on where you live. Speak with your municipality for more information.
• Hire a professional. Pool removals should not be done DIY. There are too many issues that can go wrong, which can dramatically increase the project cost.
• Resale potential. Many potential buyers do not want a house with a pool. Filling it in may make your property more attractive. Beware that if you do a partial fill, you need to disclose this, which may turn some buyers away.
• Restore a filled-in pool. You can install a new pool if you completely removed the old one. If you partially filled the pool, you need to completely remove it before a new pool can be put in. Once the area is entirely clear of any material, your costs will be similar to a new pool installation.
• Timeline. Partial fills can be done in 2 to 5 days. Complete removals may take longer, 5 to 7 days.

Don’t Miss: What Chemicals Go In Pool First