What Is Pool Refinishing
Before you get started on any home or pool repair, you should research the process and the price tag. Youll then know what to expect, and if you have any concerns throughout the process, youll be a more informed consumer. So, what is pool refinishing?
Also called resurfacing, refinishing is a regular maintenance process that involves removing and replacing the top layer of the pool surface. With a smooth, rejuvenated surface and any cracks or leaks repaired, the pool is ready for a new sealant. The completed process results in a pool ready for years of use, with all the luster you loved when you first installed it.
Acid Wash The Surface
After completing sanding, you now need to wash the pool surfaces with acid to remove any rough patches that may have escaped the sanding process.
Be careful when you do this, though, and take extra care to wear protective gear. Also, use an acid brush to spread the stuff evenly over the surface as this will prepare it to accept new plaster.
Cost To Convert A Vinyl Pool To Fiberglass
The cost to convert a pool to a pool is between $50,000 and $70,000. There is no easy process when it comes to converting from one material to another. Essentially, you need the old vinyl pool completely removed. Then, a new fiberglass shell can be installed in the hole. However, you likely need some backfilling or excavation first because vinyl pools come in more sizes, shapes, and depths than fiberglass pools. This means that the costs of converting from vinyl to fiberglass are similar to the costs of a new fiberglass pool.
Also Check: How To Get Iron Out Of Pool
Pool Lining Replacement Cost
The cost to replace a pool lining is $3,000 to $6,000. Pool linings are used in vinyl pools. They must be replaced about every 7 to 10 years. Replacing the lining is a major undertaking. The pool must be drained, and the old coping and removed. The frame must be inspected before the new liner can be put on. If the frame is in good condition, the vinyl liner can be stretched into place and the coping reinstalled. Issues with the frame must be repaired before the new liner can be installed.
What Is The Longest Lasting Pool Finish
Tile FinishesTile Finishes Though tile is the most expensive pool finish and takes longer to install than plaster and aggregate, its the longest lasting pool surface. With proper application and minimal maintenance, tiles should never need to be replaced. Tile pool finishes come in ceramic, porcelain, glass and stone.
Don’t Miss: Best Vacuum For Above Ground Intex Pool
Cost To Add A Waterfall To A Pool
The cost to add a waterfall to a pool is $1,000 to $3,000. Waterfalls make very attractive water features for many pools. They can be installed on any pool type in any area. They are frequently installed as part of a larger landscaping project but do not have to be. They can add the sound of running water and the appearance of a natural rock formation. Some waterfalls can also act as water pumps, circulating water through the pool.
How Much Does It Cost To Resurface A 10 000 Gallon Pool
Typical costs vary a lot, from $1,000 to $30,000, based on pool size, pool type, and the finish you want. The national average cost to resurface pools is $6,500. Simple, DIY-friendly options, such as painting the pool surface, are more affordable, at around $1,500, including labor, for a 1,000-square-foot pool.
You May Like: When Does Jones Beach Pool Open
How Long Should Pool Plaster Last
The most important hidden secret of enhancing the life of the pool plaster is to properly maintain the water level and the balance within the pool. It can very well last for about 15 to 20 years on an average that will help in the proper maintenance of the surface. If there is improper water balance then it can be having a very short span of life cycle.
How Much Does It Cost To Replaster And Retile A Pool
$5,440
In-ground pool tile replacement costs is $2,500-$5,000 on average, depending on the type of tile used and how large the pool is. Standard cost to retile a pool is $25 per square foot and add an additional $150 per skimmer.
how often should you Replaster a pool? When it comes to your pool, you should set aside a budget to replaster your pool. Ideally, you should white coat your pool once every ten years. In this time, you should have more than enough money to make fixes and give your pool some welcome updates. Usually, you would plaster your pool based on the look and feel.
Correspondingly, how much does it cost to Replaster a 20×40 pool?
Replaster Pool CostsLabor: $380 to $517 per six hours. Total average cost for 120 square feet: $560 to $720. Average cost per square foot: $4.66 to $6.
How much does it cost to Replaster a gunite pool?
Average Cost to Resurface a PoolGunite and fiberglass can average up to $6,500, including labor. Depending on what you currently have, resurfacing may require completely replacing the pool surface and base. This costs between $35,000 and $65,000 and is essentially the same as the cost of building a new pool.
You May Like: How To Heat Above Ground Pool Fast
Identify The Problem Areas
Not all portions of your pool are going to face the same amount of damage. So make sure you identify the areas that are in extreme need of a new plaster job. Once you do that, youll be sure about the amount of work that awaits you.
Also, remember to pay extra attention to the edges and corners of your pool, as they tend to get chipped and damaged more than the other regions. Keep a chisel handy so that you can peel away the loose plaster easily.
Cost To Replaster A Pool Calculator
Sunshine and pool chemicals can damage a pools surface over the years. Brown spots can form on the pools once beautiful surface, and homeowners may find themselves spending more time performing maintenance tasks. Cracks in the surface, or even exposed concrete, are signs that a swimming pool needs to be restored. Replastering a pool is an excellent way to do that.
Cost Calculator
| Range for this type of project: | $1,384 |
| $1,098 | arrow_drop_down |
| Labor cost, under typical conditions, for complete refinishing. Pool will be drained, surface sandblasted, and minor cracks patched. Standard white plaster or marble-duct plaster with simple texture will be used to coat surface. Blemishes will be repaired, and any remaining roughness smoothed. Pool will be cleaned and filled. Deck and waterline tile replacement will incur separate costs. Rate is inclusive of all aspects of the project, such as thorough planning, acquisition of equipment and material, preparation and protection of project site, and meticulous cleanup will be provided. | |
| Pool Replastering Job Supplies | |
| Requisite supplies for the job, including surfacing materials, connection fittings, and minor components. |
Also Check: Iron In Pool Water Green
How Often Do You Have To Do Pool Resurfacing
With an inground pool, you have to resurface the area every 10 years or so. Doing this will ensure everything is in working order and extend the life of your pool. Like most pool maintenance, resurfacing isnt cheap. Fortunately, there are plenty of options to choose from to suit any swimming pool and any budget.
Cost To Convert A Fiberglass Pool To Concrete
![How Much Does It Cost To Replaster A Pool [2020]](https://www.lovemypoolclub.com/wp-content/uploads/how-much-does-it-cost-to-replaster-a-pool-2020.jpeg "How Much Does It Cost To Replaster A Pool [2020]")
The cost of converting a fiberglass pool to a concrete pool is $70,000 to $90,000. To convert a fiberglass pool to concrete, you first need to completely remove the fiberglass shell. Then, the concrete frame can be erected and poured. However, since concrete pools give you far more options than fiberglass for shape, size, and depth, you likely have to excavate. This means the cost of converting a pool from fiberglass to concrete is similar to installing a new concrete pool. Keep in mind that you often have to destroy the deck to get out the shell, and the shell may also have disposal costs.
Don’t Miss: How To Lower Cya
Cost To Retile A Pool
The cost to retile a pool averages $3,000 to $4,000. Tile is used as one of the wall coverings for concrete pools. It can be used as a single decorative strip beneath the coping. It can also be used to cover the entirety of the pool walls. Pool tile comes in many colors, sizes, and materials. It can be laid in sheets of mosaic, or it can be larger tiles. The pool must be drained to replace it, and the old tiles chipped or pried off before the new tile can be installed.
Cost To Replace All Pool Equipment
The cost to replace all pool equipment is between $3,950 and $11,750. Pools require many pieces of equipment. This includes a pump, filter, skimmer, and heater. Pool equipment comes in many types and sizes. Most are scaled to your pools size, with larger pools requiring larger equipment. This can impact the project costs.
Recommended Reading: Mandalay Bay Pool Hours Winter
Cost Of Regrouting A Swimming Pool
The cost to regrout a swimming pool ranges from $8,000 to $15,000. Grout is the material that is installed between tiles. It is a mixture of Portland cement and aggregates. This material is important for protecting the tiles from damage. If it cracks and begins to come loose, it must be dug out and replaced. This requires the pool to be drained and is extremely time-consuming and labor-intensive.
Dont Replaster Your Pool Until You Read This
Choosing the right company to replaster your pool is a very important decision. There are differences that truly matter to you, especially in the long run. Here are some important factors to consider when replastering or resurfacing your pool:
A much better solution that cares for your pool is WATER BLASTING. We are one of the only companies in Southern California that have made the heavy investments into water blasting equipment for pools. The reason is that water blasting allows us to control the depth and the pressure needed to remove the old plaster pool surface. This process does not weaken or compromise the pools structure. This can save you massive headaches and $1000s.
Also Check: How To Lower Cya In Pool
How Much Does It Cost To Replaster A 30000 Gallon Pool
Typical costs vary a lot, from $1,000 to $30,000, based on pool size, pool type, and the finish you want. The national average cost to resurface pools is $6,500. Simple, DIY-friendly options, such as painting the pool surface, are more affordable, at around $1,500, including labor, for a 1,000-square-foot pool.
Pool Refinishing Cost With Plaster
Plaster is the most classic pool finish, and it remains a popular choice due to its lower price point. It may be your best option if you have a large pool or dont have the budget to invest in other, more expensive types of finishes.
White plaster lends the classic pale blue color to your pool, but it also stains easily. One alternative is tinted plaster, which has the added benefit of increasing dimension and enhancing the pools reflection.
When deciding which finish to select, its important to consider the cost of both the current repair and future maintenance. One strike against plaster is its shorter lifespan when compared to the others, meaning it will need replacement sooner. This future cost also applies to labor and the inconvenience of having to drain and refill your pool, crews in your backyard, and no access to your pool for a period of time.
Do you have a fiberglass pool? Plaster is not an option, then. Additionally, some people find its texture rough and coarse, so it may not be an ideal choice for those with sensitive skin.
Cost to resurface with white plaster: Approximately $4 per square foot
Average lifespan: 7 years
Recommended Reading: Pool Resurface Cost
How Much Does It Cost
Many people come here wondering how much it costs to remodel a pool.
- How much does it cost to resurface my pool?
- How much does decking, new tile, updated equipment, etc., cost?
And, your questions are reasonable ones. However, without knowing something about your pools size and the scope of the project , its hard to put a meaningful cost estimate on a page like this.
But there are some things we can tell you that may help, though.
There are basically three types of interior surfaces for your pool: plaster/quartz finish pebble and ecoFINISH, an entirely new surface-
- Plaster, of course, is your least expensive option. It also has the shortest service life and, Realtors tell us, replastering your pool doesnt add to the value of your home. A dollar spent is a dollar spent!
- Pebble will last about twice as long as regular plaster and is not quite double the cost. And, Realtors tell us you can add about fifty cents to the value of your home for every dollar you invest in pebble.
- ecoFINISH is a finish you may not have even heard of. It is a polymer-based interior surface with some extraordinary features and benefits. You can learn about those here. But for now, know that ecoFINISH is about 20-60% more than pebble, but worth every penny in our humble opinion.
And how old is your pool? Heres where it can get complicated:
Okay, okay, still not satisfied? Youre really looking for a number?? Guess we can’t blame you…
Can I Resurface My Pool Myself
doyourself pooldopoolChoosing the Best Material for Pool Resurfacing
- Plaster. Plaster is the most common pool resurfacing material because it is the cheapest.
- Pebble. This resurfacing material is actually a mixture of rock pebbles and plaster, although pebbles cover most of the surface.
- Concrete. If you favor durability over aesthetics, then concrete is a good material for resurfacing.
Don’t Miss: Can Vdara Use Aria Pool
Why Is My Pool Surface Changing Colors
Even if you take good care of your pool, sometimes damages to the surface can still occur. One common cause of this is improper water chemistry.
A chemical imbalance to the water can sometimes happen on the first filling of your pool. Youll want your pool to have a pH of 7.2-7.6. This is an ideal range to make sure the surface stays healthy.
Damages could also occur due to rain, which can disrupt the balance of pH in your pool and create an environment that can hurt your surface. There are a lot of problems that can happen if this is the case so make sure to test your water.
It could also be fertilizer or other rust that gets in your pool and causes stains. Anything from trees, leaves, and plants can cause your pH balance to change and leave your pool open to damage.
Diving Board Installation Cost
The cost to install a diving board on a pool averages $500 to $2,000. Diving boards can make a fun addition to many pools. Your pool should be a minimum of 12 deep in one spot to safely install one. Ideally, it should be deeper than this. You cannot install a diving board on a fiberglass pool because fiberglass pools cannot reach these depths. Diving boards come in several heights, lengths, and styles.
Recommended Reading: How To Clean Tile Grout In Swimming Pool
Glasscoat Pool Surface System : Ideal Pool Resurfacing Las Vegas Nv Option
The water in pools often undergoes treatment using aggressive chemicals to keep it clean and hygienic. While these chemicals attack bacteria and algae, they have an adverse effect on your pool surface as well.
This is where Glasscoat Pool Resurfacing Las Vegas stand-out. Glasscoat is inert to these chemicals, which is just one of the reasons why it is an ideal choice for a pool surface. The use of the latest resin and spray technologies ensures that youll have a smooth and vibrant surface that will last a long time.
Resurfacing A Vinyl Pool
Vinyl pools are a popular choice because they are affordable. They consist of a vinyl sheet liner that fits tight around the pools surface, typically sealing around the deck. Vinyl is more flexible than concrete and more cost-effective than fiberglass.
While liners can last for years at a time, eventually, theyll begin to warp and wear after a few years of use. You can spot patch small tears and imperfections, but once you start to notice leaking, its time to resurface your pool.
Patching a vinyl pool costs about $100 to $500 for materials. If you decide to hire a professional instead of doing the job yourself, you can expect to pay another couple hundred for expert service.
When the vinyl liner needs replacing, it can cost between $1,000 and $3,500 in both material and labor. A is full replacement is really the only way to resurface a vinyl pool thats become dry and brittle. If you take into additional costs, such as refilling the pool and restocking chemicals, it may run you closer to $4,500.
For more on vinyl, read my vinyl pool cost analysis.
Recommended Reading: Can Lice Live In Chlorine Pools
