Thinking Of An Above Ground Fibreglass Pool
Authorised Compass dealers are your local experts in installing top quality Compass fibreglass pools, whether partially or completely out of the ground. They can help you design your project and provide you with a cost estimate. Find your local Compass pool dealer now to get your free quote on an above ground Compass pool.
How Long Does It Take To Install An Above Ground Pool
On average, your above-ground pool can be installed and ready to go in 1 to 3 days depending upon the size of the pool and the condition of your yard. This process involves digging an 18-inch deep electrical trench, electrical work, building the pool, installing the liner, skimmer, and pump. Expect additional time and expense if you are installing a perimeter fence or a deck system.
How Is A Swimming Pool Installed
Pool companies factor in the weight of water as a counterbalance against the walls caving in, so an empty pool is a structural risk.
There are essentially four ways of building a pool. Most common is the traditional block and liner technique, which, as its name suggests, consists of masonry blocks and a vinyl liner .
Secondly, a gunite shell which is made up of a steel mesh frame onto which shotcrete or gunite is sprayed is finished with a waterproof render and tiled. Thirdly, a polyethylene preformed shell is used.
And finally a more recent development, the carbon ceramic shell. This uses technology from the aerospace industry to deliver an energy efficient pre-made shell ready plumbed and all fitted out to your specification bit like ordering a car.
The techniques get progressively more expensive but are also quicker to install, less prone to failure and more efficient to run.
When employing a pool installer, make sure they are a member of SPATA . This means you will automatically be protected against them being unable to complete the contract, and will have warranty insurance cover.
Don’t Miss: Is The Venetian Pool Open Year Round
Maintenance Is A Breeze
It’s all depending on the size of your Above Ground Pool, but in typical Above Ground models the water usage is much lower than standard ingrounds. This can mean that your Above Ground will require less chemicals and your equipment and sanitation system wont have to work as hard saving you time, and money!
Cost To Put In A Saltwater Pool
Saltwater pool installation costs range from $29,000 to $57,000 when building new. When converting from a chlorine pool to saltwater, costs range from $600 to $2,200, or about $870 per 10,000 gallons to install a saltwater chlorination system, also known as a salt chlorine generator.
A saltwater pool is still a chlorine-treated pool, but the chlorine is created by turning the saltwater into the necessary amounts of chlorine through electrolysis. The benefits of a saltwater pool include not having the smell and irritation of chlorine on the skin and the lower maintenance costs of $45 per month, or $80 to $150 per month if you pay a cleaning service.
Also Check: Vdara Late Checkout
Installations For Above Ground Pools
The installation costs of above ground pools usually run $1,000$3,000, depending on the size and type of pool. Keep in mind that oval pools normally cost more to install than round pools, and the kits are also more expensive.
In recent years, big-box stores like Walmart have also started selling above ground pools. The main manufacturer of these pools is Intex. Such set and fill pools are very inexpensive, usually costing $100$800, and in most cases they last 13 summers before they need to be replaced.
Finally, there are some rectangular above ground pools available on the market as well. The most well-known rectangular above ground pool company is Kayak Pools. Rectangular above ground pools are almost always surrounded by a wrap-around deck this is necessary for structural support. Because of this, they are usually over $10,000 installed.
How Much Does It Cost To Build A Pool With Extra Features
Perhaps the most exciting part of planning a pool is choosing the different features that make it your own. When budgeting, remember that each of these increases the cost.
When planning your project, it helps to develop a list of the most important features. Then, prioritize them into must-haves and nice-to-haves. From there, it will be easier to decide what to cut if your eyes are bigger than your budget.
You will need to include certain custom features like specific lighting, integrated water features, or built-in amenities in the original budget. Before giving up on beloved features, however, find out if the builder can delay certain add-ons for future installation. For example, you can complete an attached fireplace or a fun rocky waterfall feature later when you have more money in your budget.
Also Check: Unclog Pool Skimmer
Tip #18 Duct Tape The Wall Bolts Inside The Wall
When the wall is in place and bolted together, youll want to make sure the bolt heads inside the wall dont damage the liner later. Using duct tape over the bolts is the best way. Some will do stuff like tape a strip of cardboard or something unnecessary.
Just tape two layers of duct tape over the bolted area from top to bottom and youll be good.
Above Ground Pool Accessory Costs
HomeAdvisor cautions to remember all of those other costs. Will you want an above ground pool deck? If so, it will run you $300 to $3,000, depending on the size, materials, and labor needed. Then, there are things like electric installation for the pool filter , a heater , above ground pool cover , fencing , lighting , and any fountains and waterfalls you wish to add .
So, itâs easy to see how much your project can add up, depending on what youâd like to add on. And unless you purchase a full kit, even things like an above ground pool ladder wonât be included, and you can expect to pay between $100 and $400. The off season will come eventually as well, so donât forget that winter cover.
Finally, thereâs the less-fun aspect of maintenance, which costs about $115 per month on average. A professional pool service can help keep things looking good for between $85 and $150 per month, or you can do the chores yourself. This includes things like skimming, cleaning the pump filter, testing the waterâs chemical balance, and adding chemicals when necessary.
Read Also: Does Vdara Have A Pool
Recommended Reading: Vacuum Above Ground Pool Without Skimmer
Questions To Ask When Designing A Pool
How Do I Keep A Swimming Pool Safe
Safety is a huge issue, but with a sensible approach it can be built in to the installation, and risk while never entirely removed can be minimised.
I cant remember the last time we installed a pool without a safety cover,” says Alex Kemsley from Compass Pools. “They are a fair investment starting at £10,000, however they can save a life. They also make life a lot easier as the pool is opened at the touch of a button, dirt is kept out and heat is added by turning the entire pool into a big solar panel.”
Your safest bet? A 4ft-high locked fence around the pool with an automatic safety cover and rescue equipment nearby. Its also worth checking out a French-standard pool alarm , which protects the perimeter of the pool using infra-red technology a bit like a burglar alarm.
You May Like: How To Calculate Feet Of Head Pool Pump
Metal Frame Pool Price
Metal frame pools range from $500 to $3,000. This is the classic above-ground pool. It is made from a metal frame kit that is fairly easy to put together. A liner is then stretched over the frame. They tend to be smaller and not as durable or long-lasting as hard-sided pools. You cannot use a saltwater generator with this pool. The salt may corrode the metal, which could cause leaks.
Install Strucuture Part 1
Now comes time to unroll the wall. Before doing so, be sure to identify the connector you will want to use as the area where you will bolt the wall together. Your skimmer and return will end up near that area .
Get some friends for this to help. Many of them. You will need to unroll the wall from the inside without damaging the base.
Pro Tip: We have a steel rod that we place next to the starting point of the wall and we tie the wall to that rod so that it stays in place. We also have a buggy with a smooth surface under it that rotates. It makes the process so much better.
Slowly move the wall and unroll as you walk around the pool. Once person will need to lay it firmly inside the groove. Once you have completed the circle around the pool, you will be able to bolt the wall together. You should now start to see how your pool so going to look like in your backyard!
Once the wall is secured, you can start installing the posts on top of all the connectors. Don’t forget to remove the pins you set earlier. If you have a beaded liner, you will also be able to install the bead track. Adding this track will create much more stability to your wall. Make sure that those tracks are installed firmly and there is no gap between each you lay down. Note that very often, you will need to cut the final piece to make it fit. Make sure you measure twice, cut once.
You May Like: Intex Pool Shortage 2021
Tip #29 When Attaching The Top Connectors Make Sure Each Upright Is Level
Once the liner is in place and has enough water in it that it cant move, its time to attach the top connectors.
Some top connectors go on tight. This means that you cant move them much later on . This is then a good time to make sure that your uprights are level.
Take a torpedo level and adjust each upright just before attaching the top connectors.
Above Ground Pool Prices
When estimating your costs, the size will be the most significant factor for new pools. Bigger pools cost more upfront, and installation takes longer. Also, the manufacturer selected and quality of pool will influence your price. Doughboy and Kayak Pools are a couple of the best brands out there, and most expensive as well, but you get what you pay for.
Also Check: Dolphin Nautilus Cc Plus Troubleshooting
A Comprehensive Cost Guide On Above Ground Pool Prices
The most useful tool to calculate your home renovation costs for free.
A dip in a swimming pool is always refreshing. Especially on a hot summer day, and that too in your own yard. Gone are the days when only the affluent could afford such a luxury. Today, homeowners can own a beautiful pool without much installation and cost hassles. Most above ground pool prices are not as high as they used to be.
Therefore, your outdoor space can easily become a hub for some hot-weather relief and fun bonding with family and friends.
If you too are thinking of installing an above ground pool, we will have you know everything about above ground pool prices as well as costs for materials and labor involved in the project. Our cost guide will help you make an informed decision about building your own swimming pool while saving a good amount of money.
Above Ground Pool Vs Inground Pool Cost
The average cost to install an inground pool is $35,000 with most homeowners spending between $28,000 and $55,000. The additional cost of pool ownership for essential maintenance, increased utilities, and repairs adds $2,500 to $5,000 every year.
Above Ground Pool Vs. Inground Pool Cost
| Pool Type |
|---|
As you consider installing an above-ground pool, also factor in these considerations:
Also Check: Inground Pool Prices Buffalo Ny
How To Install A Base For Your Above Ground Pool Liner
Many do-it-yourselfers installing an above ground swimming pool for the first time have questions regarding how to properly install a base underneath a pool liner.
This article will illustrate the correct way to do this in order to make the installation go smoother and protect the pool liner and pool wall from being damaged.
One of the biggest problems that we see is with the height of the base beneath the above ground pool liner. When the sand base is not high enough there is excess strain put on the pool liner and pool wall, and this tremendous weight of the water can easily cause the vinyl pool liner to blowout and/or the metal pool wall to be pulled down.
Pool liners are obviously not built to withstand water weight, they are simply made to line the inside of a pool to hold the water. Therefore, when installing a new swimming pool or a new above ground pool liner it is extremely important to make sure that the vinyl pool liner is supported by the proper height sand base. There should be NO AIR SPACE between the vinyl pool liner and the base that it should be resting on.
Cost Of Installation Supplies
Along with your new pool, youll need other items to make sure its installed properly, and that you have all the supplies to keep it running for the season. While you might not need all of these, its good to know what they are, to avoid surprises.
- $50 $150 | Ground cover mat to protect pool liner.
- $250 $450 | Pool bottom kit for ground soil that is rocky, has roots, or if you want to avoid using a soft sand for the bottom of the pool liner.
- $50 $150 | Where the liner meets the ground, you need a small pool cove, to ease the transition, and extend the life of the liner. You can use sand and shape it by hand, or purchase a preformed foam or neoprene pool cove that installs in minutes.
- $100 $450 | Water to fill the pool. This expense is usually overlooked by homeowners during the planning. Pros suggest using City water if its possible, since the cost of using a water truck is in the $350 $500 range, for 9000 gallons. to learn how much water you need for your new pool.
- $25 $75 | Miscellaneous supplies like marking paint, string, pipe sealing tape, etc.
Read Also: Cost To Change Chlorine Pool To Saltwater
Cost To Install An Above Ground Pool
Above ground pools typically require no excavation and removal work, and installation is rapid and easily removed if necessary.
The cost to install an average above ground pool depends upon material and finish grade, finished surface area and material volume, preparation and special needs, and the labor rate.
In the following table the Labor Cost figure is what the able and prepared DIY persons should expect to save by performing the corresponding tasks.
Above-ground pool: prepare for and install a 12′ x 24′ above ground pool include 20 mile transport range, material, equipment, and waste.
| Item |
|---|
Above Ground Pool Price Factors
This first thing youll learn when researching above ground pools is that there are MANY options to choose from. There are smaller, inflatable top-ring pools for those who just want a temporary solution that are easily installed yourself. Above ground pools with metal walls and removable liners that are harder to install, but stay up year round and provide years of service after installation. Review these above ground pool options below.
For the pool prices from a retailer or wholesale supplier, expect the pricing to be in the ranges below.
- $50 $150 | Simple, inflatable ring 10-15 round, 30 deep above ground pool.
- $150 $600 | Better than the inflatable pools above, these vinyl side above ground pools require a bit more assembly, but still need to be taken down after the swimming season. You can expect pools in this price range to be 15-20 round, with a depth of 36-48 inches.
- $600 $1,350 | Above ground pools in this range will get a more permanent, steel or aluminum wall pool. Pools in this price range are both bigger and deeper, and also include more accessories like a ladder, skimmer, and sand filled filter.
- $1,350 $2,500 | At the top end of above ground pool pricing, are pools with thicker sidewalls, sturdier pool liners, and vinyl coatings to prevent discoloration and rust. Youll have a wide selection of size, depth and shape to choose from.
Also Check: How Much To Convert Chlorine Pool To Saltwater
