Saturday, May 21, 2022
HomeEditor PicksHow Much To Replace Liner In Inground Pool

How Much To Replace Liner In Inground Pool

- Advertisment -

Vinyl Pool Liner Cost

How To Replace An Inground Pool Liner

The liner is the part of your vinyl pool that you see and feel. It is stretched over the walls of your pool, giving it a watertight finished surface. Vinyls come in a range of thicknesses, as well as embossed and non-embossed. Vinyl liners are measured in mils, with 1 mil being 1/1,000th of an inch. The most common measurements are 20, 25, 27, 28, and 30 mils. The thicker the liner, the more expensive the cost and the more difficult the installation. The thickness does not necessarily translate into a longer time before you need to replace the liner. However, thicker liners resist tears and punctures better than thinner ones, which means it will require fewer repairs over its lifetime.

Embossed liners tend to be thinner overall than non-embossed liners. This is because embossed liners have thicknesses that vary over their surface, with the raised sections being thicker than the flat sections. The liner will be labeled as the thickest mils and not the thinnest. This means that an embossed liner that measures 27 mils and a non-embossed liner measuring 27 mils will not be the same thickness or offer the same protection against rips or punctures.

Type
$10 – $12/linear foot

Diy Inground Pool Cost

A DIY inground pool project is a way to save money by taking on some of the tasks yourself. According to River Pools and Spas, a do-it-yourself inground pool project could save you $6,000 to $10,000 on an inground fiberglass pool project that would have cost $40,000 to $55,000 with a professional pool company.

Hiring someone to dig the pool hole for you costs between $400 and $1,500 in an area with optimal soil conditions or as much as $15,000 in hard to get to areas with rocky terrain. Additional expenses you might incur might include the following:

  • Fiberglass pool shell: $500 to $5,000
  • Equipment rental : $2,000
  • Crane: $400$800

Can I Convert A Liner Pool To Concrete

It is very easy to change your existing pool into a Concrete/Gunite Pool. This will also give you an opportunity to add some great features that are usually not found on typical vinyl liner pools, such as tanning ledges with unbrella stands, beach entrys, , benches and seats, raised water features and so on.

Read Also: Are Variable Speed Pool Pumps Worth It

How Long Do Pool Liners Normally Last

Inground pool liners typically last between 10-15 years before they need to be replaced. There are several factors that can increase or decrease that lifespan, however. These include:

  • Water Balance. Pool water that isnt properly balanced can greatly reduce the life of a pool liner. Over time, poorly balanced water can stretch the liner, cause wrinkles to form and can turn the liner hard and brittle.
  • The Fit Of The Liner. If a liner wasnt made specifically to fit the pool it will not last as long. Improperly sized liners need to be stretched into place. This means that a liner that was once 30mil thick might be as thin as 15-20mil once installed. This leads to weak points in the liner and a reduced lifespan.
  • Ground Water Problems. In areas with high groundwater levels, water can seep in under the liner, causing it to float. While the liner will settle back down when the groundwater recedes, it never goes perfectly back in to place. This leads to stretching, wrinkling, or the liner coming completely out of the coping.

How Do You Know When You Need A New Pool Liner

How Long Do Vinyl Pool Liners Last?

Signs You Need a New Pool Liner

  • The pool liner is significantly faded in different areas. As the pool liner gets exposure to the sun and fades, the vinyl its made from will become hard and brittle.
  • You notice that you are needing to put more water in the pool than normal.
  • The pool liner is wrinkled.
  • Recommended Reading: Cost Of Building Your Own Inground Pool

    Protect Your Pool With A Safety Cover

    Keep your family, friends, and pets safe this winter with a Safety Cover. A Safety Cover is the easiest, safest, and most economical choice over time. It makes closing your pool a breeze. Our covers are made in Canada with safety first in mind. Manufactured with lightweight, BioShade MeshTM material, our Covers offer a user-friendly design thats easy to handle, use, and store. The simple anchoring system lets you take your cover on or off with ease using the included installation bar.

    Whats Included With Your Safety Cover?

    Your new Safety Cover comes with a box of hardware that will be used during installation. The items included in these boxes are specific to each pool owners unique shape and specs and include:

    • Custom measurement to provide the best possible fit for your pool
    • Spring loaded anchors
    • Installation bar
    • Allan key with handle
    • Ability to cover pools with jump rocks, stone waterfalls, sheer descent waterfalls, and almost any other feature
    • Available in four great colours – Tan, Grey, Green & Blue

    Beach Entry Or Zero Entry Pool Costs

    Beach entry pools cost $87 per square foot on average, with most homeowners paying between $50 and $125 per square foot. Also known as a walk-in pool or a zero-entry pool, it has a gradually sloped entry into the poolin the same way you would walk into the water on a beach. Typically the water at that shallow end is warmer than it is in the rest of the pool.

    Don’t Miss: Intex Pool Heater For Above Ground Pools

    Inground Pool Heater Cost

    An inground pool heater costs $550 to over $10,000, with another $400 to $500 for installation. The difference in prices for inground pool heaters is primarily how much water you need to heat, and what the rise in temperature is from the average coldest temperature to the desired water temperature.

    • Electric tankless water heaters generally start between $500 and $600.
    • Larger and more powerful electric pool water heaters average between $1,500 and $3,500.
    • Similar gas-powered pool water heaters fall between $800 and $2,500.

    On the high-end, you will see solar pool heaters or electric pump water heaters for anywhere from $2,500 to $10,000. These work in hotter climates and transfer the heat in the air to the water in the pool, and they do so very economically.

    How To Choose A Replacement Pool Liner

    How to Install an Inground swimming pool liner DIY Replacing a vinyl liner

    There arent many options for pool liner replacements, but you should still have some information before you invest. After all, the cost of replacing your pool liner can be significant. Consider the weather, warranty, and type of pool you have before you make your final choice. For more, you can read our full guide on how to choose a pool liner.

    Also Check: Costco Pool Tablets

    How Long Does A Pool Liner Last

    On average, an inground pool liner will last 5 to 9 years, while an above-ground pool liner lasts 6 to 10 years. A typical 25-year liner warranty may only consist of 2 to 5 years of full protection before it’s proratedmeaning it loses value drastically every year.

    An exact measurement of time is difficult to determine, but anything over ten years is impressive. With the right chemical balancing in your pool water, you can get more life out of your linernot maintaining chemical and pH levels in your pool water can destroy a vinyl liner.

    • Keep your pool covered whenever its not in use.
    • Dont let pets with claws swim in the pool.
    • Fix tears as soon as they occur.

    Thickness Of The Vinyl Liner

    Its vital to know that vinyl liner pools come in a variety of thicknesses, ranging from 20 to 30 mils. As a general rule of thumb, thinner liners are cheaper. Their installation is quick, and theyre easy to work with. On the other hand, thicker lines are more expensive, and they are much more finicky to install.

    We recommend going with the thickest option you can afford despite the additional costs and extra time of installing thicker liners. Thicker liners provide more robust protection against tears or punctures. You never know when some debris might fall in your fall and create a hole. The more you safeguard your pool against mishaps, the less youll have to pay down the road.

    Also Check: How To Build An Inground Pool For Cheap

    How Do I Choose The Color Of My Pool Liner

    In a deep pool the water is more blue and you see more of the water and less of the finish. Sunlight and shade play a role in the color of the water. If the pool is in direct sunlight it will have a lighter water color and shade will deepen the color. It is important to consider these factors when choosing your liner.

    How About Fading Or Bleaching

    Vinyl Pool Liner Replacement: Cost, Steps, Tips

    Fading at the waterline will happen with time, especially for vinyl pools in the hot Southern sun. For pools in the mid-section or northern parts, its not such an issue, especially for pools that are covered and winterized for half the year or more. Although the vinyl has UV inhibitors, direct sun can be hard on liners, especially those with a printed border. A stick-on 6-inch tall border, called BorderLines, can be applied at the water line to brighten up the pool again.

    Bleaching of a liner is a type of chemical fading that usually is caused by repeatedly pouring shock directly into the pool , or throwing tablets into the pool. Chlorine tabs will stain any pool surface type and are best used in a chlorinator. Liners are more resistant to this type of fading than they used to be, but its best to be careful not to allow chlorine to directly lie on a vinyl pool floor.

    Recommended Reading: Can I Paint The Concrete Around My Pool

    Cut Out The Old Liner:

    Cut the liner with a razor knife at the base of the wall all the way around the pool, and under the pool step. Then cut vertically from the floor, up thru the top bead in several spots around the pool. Carefully pull the liner from the track by lifting up and outwards, the plastic track may be brittle and can crack if stressed. Roll-up the wall sections, and remove from the pool. Leave the floor section of vinyl liner in place for now, keeping it in the pool until you are ready to work on the floor.

    Carefully remove, with a large #3 Philips screwdriver, the faceplates for the skimmer, wall return, main drains, pool lights, and pool step sections. You can use a cordless drill as well, but be sure to use a large #3 Phillips bit.

    Safely store your screws, so not even one gets lost, we usually use Zip bags for the screws. The screws will not need replacement if they are not damaged. It is however recommended to replace the faceplates and gaskets, except for the step gasket, which is a very thick and durable rubber seal.

    Order the correct gaskets , for your skimmer, main drain, pool light and wall returns. There are two gaskets used, one behind the liner, and one on top of the liner.

    New faceplates for the skimmer, drain and returns are also recommended, as older plastic faceplates will warp and crack, which makes a poor seal that can seep and weep water.

    How To Replace Your Above Ground Pool Liner In 8 Easy Steps

    If you find yourself needing to replace your above ground swimming pool liner, either because of tears or excessive staining, you dont need to hire a professional.

    As long as you have a little time on your hands, you can save yourself some serious money by doing it yourself.

    Hiring a professional can cost well over $1,000 on top of the cost of the liner!

    And since we are all about getting stuff done ourselves and saving money around here, Im gonna show you how its done!

    Recommended Reading: How Long Should I Run My Pool Pump Each Day

    Can You Change A Pool Light Underwater

    Typically, backyard swimming pools are equipped with 1 or more underwater lights. There is no need to lower the water level in your pool to replace the burned-out bulb. Instead, you can remove the light housing from the side of the pool, pull the fixture up onto the side of the pool, and change the light bulb there.

    Inground Pool Liners: The Replacing

    How Much Does a Pool Liner Replacement Cost?

    Even if your measurements were good, and you got the right size liner, if you install it poorly, you could end up with a big, watery mess on your hands. So were going to start with another recommendation: If youve never replaced an inground pool liner before, and you have any doubts about how to do it correctly, hire a professional. If you decide to go that route, you can skip down to what youll need to do once the liner is installed.

    If youre going to go for it

    Don’t Miss: How To Replace Pool Tile

    Cost Of Inground Saltwater Pools

    The average cost of an inground saltwater pool is $35,000 for the pool and another $1,100 to $2,200 for the salt water generator, bringing the total cost to around $36,100 to $37,200. Saltwater pools do not need any chemicals added, are easier to maintain, and don’t have a chlorine smell.

    For homeowners who would prefer not to use traditional chemicals in their pool, a saltwater swimming pool uses a system that converts the salt in the water to chlorine, but the levels are much lower than in a chlorine pool, so it is kinder to clothes and your skin.

    Estimating Long-Term Salt Water Pool Costs

    • Replacing the cell in the generator every 36 years at the cost of $800 .
    • Adding salt to run your saltwater pool An average pool measuring 14 by 28 with a depth of 6.5 feet has a water volume of just under 20,000 gallons, and for that much water, you will need around 11 x 40-pound bags of salt, which should total just under $100.

    Vinyl Pool Seats Cost

    Not every pool includes seats. Some people use their stairs when they want a place to temporarily rest in the pool. However, it is possible to add seating inside the pool. Like with stairs, there are different ways to do this.

    You can add a simple white plastic bench seat to the interior walls, which is the least expensive option. The white stands out against the pool walls, however, so it is the most obvious.

    You can choose to have your liner go over a bench or ledge in the pool wall. In this case, the bench or ledge is built into the wall. The is stretched and fitted over it. This creates a more seamless appearance for the pool, resulting in a more subtle look. Like the rest of your pool, this means that the liner is at risk of puncture or ripping in these areas, while a white plastic bench will be more durable long term.

    Type
    $100 – $300

    Read Also: Salt Calculator Pool

    Additional Costs To Consider

    Another important consideration is your home’s location. Installers tend to earn more in locales with high property values, such as coastal cities. The total expense might also vary depending on the travel distance from their office to your house. Local tax, fuel, material and insurance costs also have an impact on pool liner installation.

    Maintenance & Cleaning Tips

    Pool Liner Installation Atlanta, Georgia

    Once your new liner is installed, you probably want to make sure you get the most life out of it, so there are a few tips you should follow to take care of it:

    • Never completely empty your pool
    • Only use brushes safe for vinyl liners
    • Be careful not to dump chemicals directly on the liner
    • Brush away and remove algae immediately
    • Keep your chemicals balanced
    • Always clean and vacuum your pool well before closing

    Also Check: Plants To Hide Pool Equipment

    Can An Inground Liner Pool Be Converted To Gunite

    4.6/5canpoolliner willpoolGunite Pool

    On average a vinyl liner pool will require a new liner at an approximate cost of $2,500-$4,500. Replacing a vinyl liner can be completed in one day. Re-plastering and re-tiling a gunite pool can take one to two weeks.

    Likewise, how much does it cost to replace a liner in an inground pool? Inground Pool Liner Replacement CostLabor costs to replace an inground pool liner range from $1,000 to $2,500 on average. Once you add the cost of the liner, the total cost to install is between $1,400 and $4,800 with most spending $3,000 to $4,000.

    Keeping this in view, can you convert a concrete pool to liner?

    Installing a vinyl liner is perhaps the most inexpensive way to fix a leaking concrete in-ground pool, but converting a concrete pool into a liner type pool should be the last resort. We encourage you to repair your concrete pool if you can.

    Can you make an existing pool deeper?

    Depth change is a fairly simple procedure, especially with steel and polymer pools. Whether you‘re choosing to go shallower or deeper, if you have a vinyl pool, the bottom will then be redone with a concrete or vermiculite coating, and you‘ll have your new depth.

    What About Wrinkles In A Vinyl Liner

    Wrinkles can happen when a new liner is installed. It could be from a bad measurement, but usually its just a matter of taking your time when you are installing the liner to make sure that it is hanging centered over the pool. Its easy to have the liner slightly askew, or not lined up to the corners and floor angles exactly. Once its lined up correctly, the shallow floor may need to be pulled up toward the shallow end wall. Remaining wrinkles can be pushed to the sides and corners as the installation progresses. The weight of the water will hold the vinyl in place.

    Read Also: How To Lower Cya In Pool

    RELATED ARTICLES
    - Advertisment -

    Most Popular

    How To Cool Down Pool Water

    - Advertisment -