What Should The Pressure Be On A Sand Filter
Your filter may be clean and normal at 9-10 psi, but your neighbors filter gauge could run higher, and be clean at 15-16 psi. Some systems with very low resistance can run very low pressures, barely registering, while other filter systems can run quite high, pushing 30 psi when the filter becomes dirty.
Other Pool Filter Problems
1. My filter needs cleaning or backwashing too often
When the filter is brand new, one might expect a filter cycle to last 30 days or longer between cleanings. As time goes by, the filter media breaks down and or clogs up, and may indicate that its time to change the filter media. If you find yourself having to backwash your filter every week, you probably need to replace the filter media, assuming that your filter is properly sized.
Generally speaking, filter sand will last 5-7 years before the sharp edges become rounded, resulting in less effective filtration. DE filter grids can last longer, seven-nine years before the fabric breaks down and develops holes. And your pool filter cartridges will only last two-four years, depending on the work it has been asked to do. Eventually, all filter media will need a replacement, and a good indicator of when to change it is the length of your filter cycle.
2. My filter is not keeping my pool water clean and clear
This is a bit of a trick question, as it may not be the filter that is to blame. Are you running the pump long enough during the day? Is the sanitizer level correct? Are the pump and skimmer baskets clean? Is the water chemically balanced? And the biggest question of all: Is the filter properly sized? If the answer to all these questions is yes, refer to pool filter problem #1 above. The filter media may need to be changed.
3. Pool filter pressure is too high
Davy Merino
Signs That Show You Need A Pool Filter Repair
From leaking valves to pressure problems, there is a host of issues associated with a pool filter that must be resolved at the earliest to ensure clean water for your swimming pool.
With summer in full swing, it is time to change the pool filter, vacuum the pool, and treat it with bleach. Youll be surprised to see, how much dirt and grime your pool can collect during the course of the winter months. With the pool remaining covered with a tarpaulin it collects algae, dirt, and slime.
Needless to say, it takes a toll on the pool filter that is supposed to collect all the pollutants. Repeated use might clog the pool filter and it may malfunction. This blog discusses the signs that show you need a pool filter repair.
Read Also: Solar Powered Heater For Pool
How To Fix A Cracked Pump Housing
mommabeans said:I know you said epoxy don’t work, but have you tried JB Weld? This stuff is a miracle worker. My ex repaired a hole in his car radiator with it and it lasted another 2 years. No kidding. And I fixed our washing machine tub that got holes in it from a necklace that scraped the sides until it wore it down. That was, Oh gosh, probably 15 years ago and I’m STILL using that machine. But, I don’t recommend the “4 hour set” kind. I would go with the one that requires atleast 24 hours.
carli said:This is what I did today. There was a crack line in my Hayward pump housing. Epoxies and other bonding products won’t work with this type of plastic and in this high pressure environment. I was not feeling likespending $180 to replace the housing so using plastic molding technique with a soldering iron I took careof the problem. ” This tool needs to be 60 watts minimum because you will be working on hard plastic”. You need to takeout the motor because the crack need to be fix on both sides. Look at the photos. Wear a mask, dangerous fumes.
Clean The Area Around The Crack
Before you begin the repair process, you will need to clean the area around the crack. This can be done with a mild cleaner and a soft cloth. Make sure to remove any dirt or debris that could prevent the repair kit from adhering to the surface of the filter. After you have cleaned the area around the crack, you will need to dry it completely. You can use a hairdryer to speed up the drying process. Once the area around the crack is dry, you are ready to begin the repair process. Also, make sure that you have read the instructions that come with your repair kit before beginning the repair.
Read Also: Pentair Intellibrite 5g Color Led Pool Light 120v 100 Cord
What Can I Put In A Sand Filter Instead Of Sand
Polyballs, or polyester balls, are used in place of sand to filter your dirty pool water. Much like ZeoSand and filter glass, the number of polyballs you use with your filter is considerably lower than the amount of sand. Think about it, 1 lb of polyballs is equivalent to 75 punds of #20 silica sand.
Can You Epoxy A Pool Filter
If you develop a crack in the plastic housing of your pool filter, water can leak through the crack. You can use epoxy to seal the filter housing without having to replace the pool filter altogether. This is a good money-saver and reduces downtime for your pool.
What causes a pool sand filter to crack?
Some filter problems are caused by excessive pressure build-up inside the tank. High pressure can cause laterals to crack and leak sand into the pool. It can also be the reason for a cracked tank or even more dramatic, the filter lid blowing off.
Can you put too much sand in a sand filter?
Too much sand and your filter will likely not run correctly or may break when reassembling. Too little sand and you will have cloudy water no matter how much your filter runs. Typically filters hold sand in 50 lb. increments, so you can safely expect filters to range from 100, 150, 200, 250 lbs., etc.
Can a 2 piece sand filter be repaired?
Generally the catastrophic blow ups seem to be in 2 piece cartridge filters that blow their top and launch equipment into the air and at people. But a sand filter isnt totally immune. If the vessel itself is compromised it needs to be turned off and replaced and cannot be repaired.
Is it safe to use a sand filter?
What causes sand filter to explode in yard?
You May Like: How Long To Run Pool Pump
Pool Filter Repair & Replacement In Alberton
Dont wait for your swimming pool to become a problem instead of a source of enjoyment. At Revamp Pools in Alberton, we can diagnose and repair your swimming pool filter problems quickly. We can also help you choose and install a new system or replace an old one. Call us today to schedule your service appointment.
Hayward Multiport Valve Repairs
Valve Change: If your multiport valve begins to leak or the handle loses tension, you could repair it with a new key assembly or a new spider gasket, or you could just replace the entire valve in just five steps.
Spider Gasket Change: Losing water out of the backwash line? Remove the top of the multiport valve and inspect the spiderweb style gasket. If its twisted, broken or worn, heres how to replace it, five-step style.
Cracked Valve Body: If there is a small crack around where the pipes screw into the valve ports or where the pressure gauge screws in, these were overtightened or had too many layers of Teflon tape .
Read Also: Where To Buy Pool Sticks
How Do I Fix A Crack In My Pool Pump
For a leak at the male threaded adapter, roll the putty into a thin snake and press it into the fitting before threading the parts back together. Repair cracks in the pump housing by pressing putty into the crack a little at a time, building up several layers. Allow a small amount of putty to overflow the cracked area.
Need A Macgyver Suggestionpool Filter Leak
- Reaction score
- 24,852
- Reaction score
- 36,444
- Reaction score
- 21,186
- Reaction score
- 12,951
- Reaction score
- 325
jscarab said:Don’t run it…..not worth the risk of blowing out and partially draining pool. Also looks like the water will be shooting right on the pump motor. Not a good spot to be in……new filter housing on Monday, only have to tear the filter down once. Gonna be storming all weekend, get it replaced Monday and the filters cleaned and clean up pool then. If you’re worried about chems, use a little liquid chlorine. I have seen many repairs to filter housing only to break in another spot soon!!!
- Reaction score
- 4,788
- Reaction score
- 6,538
- 21,186
Read Also: How Can I Heat My Inflatable Pool
Expert Pool Filter Repair For San Diego Pool Owners
San Diego residents should seek the help of an experienced service company when a pool filter repair is needed. Improperly disassembling the pool filter could potentially be dangerous for pool owners. The potential to cause damage to the swimming pool equipment is also a risk for those who attempt to repair their own pool filter. Our ProTouch technicians disassemble the filter, make the pool filter repairs and reassemble the filter. We take precautions to eliminate the risk of damage to people, property and to the pool or spa filter.
Our filter experts work with all types of swimming pool filters including diatomaceous earth or D.E. filters, cartridge filters and sand filters. We expertly repair filters made by a variety of different pool manufacturers. Some of the most commonly used brands include Pentair, Jandy, and Hayward pool and spa filters. Installing the right size and style of pool filter when a new filter is needed requires the help of an expert.
What Is A Pool Filter
A pool filtration system is made up of a pump and a filter. The pump pulls the water from the skimmer located on the pool wall as well as the main drain on or near the bottom area of the pool.
The water then flows through the pump on to the filter, which removes debris, dirt, and bacteria. After the water is filtered, clean water flows through the plumbing and returns to the pool through the return jets on the pool walls.
The pool filters main function is to filter out the debris so that the water of the pool remains clean and dirt free. Pool filters are of three types:
Cartridge filter: A cartridge filter makes use of cartridges, which are big sheets of polyester cloth or paper folded accordion-style, to catch debris. Some of these filters require a single cartridge, while others may need multiple cartridges.
Sand filter: A sand filter is nothing but a tank full of sand. Slotted lateral pipes at the bottom disperse water evenly through the sand to catch debris.
Diatomaceous Earth filter: D.E. filters use eight to ten filter grids covered in D.E. powder to catch debris.
Don’t Miss: Hot Tubs For Sale In Maine
Pool Filter Repairs Performed With The Best Replacement Parts
Along with our many pool and spa services we have been providing pool filter repairs and installations in San Diego since 1998. We have access to suppliers and distributors for pool filters and other materials at reasonable prices. ProTouch understands the importance of having and enjoying a swimming pool. We work with our customers and our suppliers to reach the best possible solutions in a timely manner. After inspecting and troubleshooting the filter, a professional ProTouch technician will provide a free estimate. Also they will answer any questions the homeowner may have about the pool filter repair.
Can You Repair A Cracked Pool Pump Lid With Epoxy
Small cracks in the pool pump lid are easily fixed with epoxy. If your pump enclosure has become brittle with age and sun exposure, the fix will probably be temporary. If the plastic housing is in good condition, the epoxy should seal the leak, saving you a costly repair.
You May Like: When Do The Pools Open In Georgia
A Perspective From The Inside
When the long hard freeze hit, Texans were left without power for several days, resulting in lifeless and frozen-solid pool equipment. When water in the PVC pipes froze, it expanded, leaving damage unlike anything weve seen in our 30 years of pool repair. No other freeze has led to entire filter housing pipes to crack wide open. Many pools experienced major damage.
Kelly and Mike fielded hundreds of phone calls, utilized FaceTime to help many customers remotely, and although icy roads and treacherous pool decks made it interesting, they still made it to many customers homes to help save their pool systems. Our own pool systems were not immune to the cold. Mikes entire neighborhood lost power during the sub-zero temps, and he will have to replace his entire pool system.
Knowing that a cold storm was on the horizon, we had taken preemptive measures and immediately called our suppliers, placing bulk orders of pumps, motors, valves, and filters. Our top priority was getting our weekly service customers operational. Despite our efforts to curb the unexpected level of damage, the pool repair industry is experiencing unprecedented supply shortages meaning orders cant be fulfilled and shipped for longer-than-expected timelines.
Maintenance Means Money Savings
Its far less expensive to find qualified pool repair technicians in Alberton and Johannesburg than it is to allow your service to go by the wayside. DIY troubleshooting, temporary fixes, and neglected repairs often end up costing you more in the long run.
We can not only repair your pool filtration tank or system, but we can even clean and replace your filters when necessary. Having us on your side means hassle-free fun in the sun all year long.
Read Also: How Much Does It Cost To Run An Endless Pool
Can A Sand Filter Explode
The filter operates under high pressure generated by a mixture of water and air. The lid can explode off the tank with tremendous force if too much pressure builds up and the clamp fails. Because of the extremely high pressure that can build in the filter and result in an explosion, a failure can be catastrophic.
Hayward Cartridge Filter Repairs
Leaking Pipe Connections: If your filter is leaking where the pipes come in and out, inspect for cracks around where the pipes screw in. If noticed, fill with epoxy as described above. If leaking around the pipes, replace them in five steps.
Leaking Filter Clamp: For your safetys sake, when you start up the filter, if the belly band holding the tank halves together or holding the multiport valve is leaking, shut off the pump immediately and take these five steps.
Cracked Filter Tank: If your filter tank has a pinhole leak or a full-blown crack, the only repair to make it to replace the filter tank.
For sand filters or older stainless steel tanks, its not cheaper to buy an entire new filter, but depending on the age, filter tanks or tank halves can cost 50-80 percent of the cost of a new filter.
Also Check: How Much Does An Above Ground Pool Cost
Experience The Protouch Difference
ProTouch Pool Services also offers San Diego a host of services. Routine pool filter cleans help prevent premature pool filter damage. If the pool filter is too damaged to be safely repaired, a technician will recommend installing a new pool filter. For more information and a free estimate for a pool filter repair contact us today!
Pool Filter Housing Issues
Sometimes even the most stringent maintenance of your swimming pool can result in a broken or malfunctioning pool filtration system. When the culprit is age and normal wear and tear, you may not immediately notice that something has gone wrong. Even if you do recognize that something is not quite right, its always helpful to know the symptoms of a damaged or failing pool filter system.
- Fractured Or Cracked Filter Housing
- Leaky Filtration Pipes
- Excess Air In Pool Filtration System
- Murky Or Green Pool Water
- Housing Faded By Elements
- Tank Pressure Issues
Recommended Reading: What Hotels In Vegas Have The Best Pools
