Remove Metal Compounds From Your Fill
Some years back, before the CuLator metal eliminator was available, there were no practical ways of removing metallic compounds from pool fill-water before entering your pool. The only possible way was to treat water inside your pool, which is hard work and expensive to maintain.
CuLator Ultra Power Park is now my best option for this because you can use it in the skimmer or pump basket to remove up to 4 ppm metal compounds from 20,000 gallons of fill-water before entering your pool. If your pool is more than 20,000 gallons, you can increase your parks and use them both in the skimmer and pump basket.
CuLator should work up to 30 days or longer depending on the metal level in your water and is replaceable once worn out.
However, the easiest way to avoid stains in your pool is to avoid filling the water with metals. Before installing your pool, it is important to test your water source for metal content and avoid water sources with metals in it at all costs because maintenance will be relatively hard and expensive in the long run.
Moreover, you need to be careful with the chemicals you add to your pool since copper may find its way in your pool from chemicals such as algaecide or ionizerand eroded pool parts with copper. If you cant use CuLator for any reason, detailed below are more ways to control metal stains in your pool.
Clean The Pool Equipment Floats And Toys
Another probable source of Yellow algae in your pool is your pool equipment, toys, floats, and anything that enters your swimming pool.
Take out everything you use in your swimming pool, brush them thoroughly before sanitizing them with bleach or using a bleach-based disinfectant.
The best way is to create a solution and spray it on these items. You want to mix ten parts of water with one amount of your bleach. Get a spray bottle and pour the solution into it. Use it to spray down the equipment, floats, and toys. Dont forget to wipe it down until youre confident its clean.
Pool Stain Removal 101
Want to make pool stain removal easier?
The secret is all in the technique. Keep reading to learn how to remove organic, metal, rust, mineral, and other stains from your pool, the right way.
Just like ketchup splotches and oil droplets seem to find their way on to every white T-shirt you own, pool stains follow a similar path. At one point or another, no matter how careful you are, odds are youre going to find one somewhere in your pool maybe along the walls or spread across the shallow end stairs.
And if youre reading this article, then you probably found a stain and want to remove it. If so, youre on the right track.
Pool stains are common and appear for a number of reasons. So they arent necessarily a sign of bad maintenance. Everything from leaves and dirt, to minerals and bodily oils, can cause pool staining.
And when stains appear, they range in color, from bright green, red, and blue smears, to dark brown and red blobs.
But luckily, removing pool stains is simple when you know what youre looking for. When you can identify a pool stain, removing it becomes much easier.
And thats what this post is all about.
So if youre ready to learn how to remove pool stains and prevent them from ever coming back again, keep reading. This post is for you.
Don’t Miss: How To Contract Your Own Pool
Lower You Waters Chlorine Levels
While effective at removing algae, chlorine can add to your stain problems. Since chlorine oxidizes areas of your pool, like the bottom, you should lower chlorine levels down to 0 parts per million. You can do this by partially draining the pool and filling it with fresh water. You can also purchase a chlorine neutralizer to quickly bring down the chlorine levels.
How To Prevent Algae Stains In Your Pool
Algae growth is preventable. The best way to prevent algae stains in your pool is to make sure it never gets the chance to grow in the first place. Here are some tips for preventing algae stains from appearing in your pool:
Don’t Miss: Pool Shock Costco
Shocking The Swimming Pool To Kill Brown Algae
Brown algae are one of the most challenging to eliminate. While they are somewhat chlorine-resistant, high sanitizer concentrations do kill them. Here is how to use a shock treatment to clean brown algae in your pool before using a clarifier.
To clean a green pool fast, follow the directions on the pool shock product and bring the chlorine level up to at least 10 ppm to kill the algae.
Prepare the treatment by diluting it in a large bucket and turn on the pool pump. Pour the shock into the water around the edge of the pool and let the pump filter the water for six hours.
Take out the filter afterward and give it a good pool filter cleaning to eliminate algae particles trapped in it.
Removing Metal Pool Stains
Lets get the tricky one out of the way first. Metal stains can be a bit more difficult to get rid of than organic stains, but not impossible. Simply follow the step by step process to get your pool back to its stain-free former glory.
Step #1 Test the Pool Water for Metals: If youre determined that metals are your stubborn-stain culprits, the next step is to find out what kind of metals youre dealing with. The best way to find out is to grab a water sample and take it into a local pool supply store to get the low-down.
Step #2 Get the Right Metal Remover: Lets refer back to the earlier section where we discussed the different colors of metal stains you might find in your pool. Depending on the color of the stain , you can purchase the right metal stain cleaner for your particular stain.
If your stains are caused by an excess of iron in the water, your best bet is a cleaner containing ascorbic acid . Whereas if copper is the problem, citric acid is going to be the best active ingredient to deal with those pesky green stains. Once you know what metal youre dealing with, you can purchase the best metal remover that targets the metal that have invaded your pool.
You May Like: How Much Is Salt Water Pool
How To Get Rid Of Organic Pool Stains
As the identification test indicated, chlorine is the solution here. But because the amount you use for regular sanitizing isnt enough to remove stains, youll need to super chlorinate the water. To do that, youll use pool shock.
Important: Remember always to shock at dusk, or at night, for best results.
Note: If youre not sure of your pools volume, you can use a pool calculator to figure it out.
How To Prevent Pink Algae In Your Pool
The easiest way to keep pink algae from making a home in your pool water is to always stay on top of keeping the pool clean.
Regular everything is what you should be striving for: regular brushing of the pool walls, regular cleaning of the nooks and crannies, regular running of your pump and filtration system, and regular testing of the pool water, and balancing it when it needs to be done.
Don’t Miss: How To Clean Tile Grout In Swimming Pool
How To Deal With Metalstains
If there are metal stainsin your pool, it is recommended to have the water analyzed to determine thesource of the metal. Once the stains persist, try to fill the pool in half withfresh water which does not have metal constituents. Leave it to disseminate for2 days and re-test the water.
These stains can beremoved by using an ascorbic or diphosphonic acid-based cleaner along with hardscrubbing on your part, ideally during the winter as stated earlier.
An alternative method in getting rid of metal pool stains is using a pH reducer. With an old sock, pour around ½ pound of pH reducer inside. Secure tightly the sock and with a pole, hold it over the stain for 10 minutes. There is no need to scrub it backward and forward, but simply allow it to rest over the stain. Once you are done, de-chlorinate the pool.
Commit To A Deep Clean
The grunt work comes firstyoull need to uproot that algae before you can make sure its gone for good. Scrub your pool floors and walls using a brush like the patented 360-Degree Bristles Pool Brush, which was developed by pool maintenance experts to help get tight corners without any of the aches or pains associated with a good clean.
Once youve scrubbed your walls, floors, and steps clean, remove large debris like leaves and twigs with a skimmer net on a telescopic pole, and then vacuum out all the algae to wasteor, if youve invested for the long haul, turn on your powerful robotic pool cleaner and clean it out automatically. You dont want any algae to circulate back out, or youll be here again before you know it.
As algae found a home in your above-ground pool due to poor circulation? Above-ground pumps are notorious for not firing up, but the Copper Force Above Ground Pool Pump, has a start capacitor to circumvent this very issue. According to customer Doug Paar, The pump is very quiet and has good pressure. I would recommend.
Read Also: Black Hose Trick Pool Heater
Clean Your Filterwith More Than A Hose
The water that goes through your filter comes back out into your pool, remember? So now imagine that your filter has microscopic deposits of algae from when you shocked your pool and turned on your pump. Yeah, lets make sure that algae isnt coming back in. Youll need to clean your filter, meaning a chemical rinse if you have a cartridge filter and a backwash if you have a sand or D.E. filter. But my recommendation? Just replace the filter media entirely. Its not risking a return of the plant youve already worked so hard to get out of there.
Always looking to cut operating costsespecially if you get even better perfomance as a result? Try the 1.5 HP Variable Speed Blue Torrent Thunder In-Ground Swimming Pool Pumpit pays itself off in under a year, is eligible for rebates, and also comes with a lifetime warranty. As customer Eric D says, Day one, I fired this pump up and it ran clean and fast.
What Is Mustard Algae And Why Should You Be Concerned
Mustard or Yellow algae is a type of algae that manifests in yellowish, yellow-brown, or yellow-green colors. When inside a swimming pool, it looks more like pollen, dirt, or sand. Sometimes its challenging to realize your swimming pool has it until its too late. It also lacks the sliminess characterized by other algae its texture is closer to dirt and most common in southern climates.
Why should you be concerned?
- Even though its not dangerous to humans, its overgrowth has the potential of harboring harmful bacteria such as E Coli.
- Unlike other algae, it stains the pool surfaces and clouds the water.
- ts easy to transfer to another swimming pool as it tends to stick to things such as bathing suits, toys, floats, and pool equipment.
Also Check: Is Cyanuric Acid Dangerous
How To Remove Pink Algae Or Slime In Your Pool
- |December 5, 2020
When people dream about having their own pool, rarely do they think about the amount of maintenance required to keep the pool in swimmable condition.
If regular upkeep isnt adhered to, the pool water can quickly turn on you, resulting in a range of nasty water issues.
Once such contaminant is the presence of pink algae in the pool. Proper steps need to be taken as soon as possible to remove any form of algae that you see growing in the water.
What Causes Pink Algae In Your Pool
There is no single cause to having a pink algae problem in your pool, as its naturally-occuring.
However, if you dont keep your pool properly sanitized, youre creating the conditions for pink slime to develop.
Pink slime is the top coating that grows on a layer of white water mold. This mold is actually an overgrowth of naturally-occuring biofilm that is present on pool surfaces.
When the surface isnt properly sanitized, the white water mold can build up, and as a result, so can pink slime.
Read Also: Should You Seal Concrete Pool Deck
What Causes Green Streaks In My Pool
In chlorine pools, algae grows when chlorine is low, and pH has drifted away from neutral. In a salt-water pool, algae can get a foothold if the salt level is low or if the system has a hiccup. Algae prefers hot weather and stagnant water, so if your pool goes unused for a period of time during the summer, you may come back to find an algae invasion. Keep in mind that the hot sun will burn off the effective chlorine in the water, so while you may think youre putting in the right amount to stay in balance, your pools composition may have slipped below the critical point.
Green algae is the most common kind of algae seen in pools, and it can spread and grow extremely quickly once inside a pool. The Pool Stain Removers explains that green algae can build up on the walls and floor of a pool, making the surfaces feel slimy. It also floats in water, making the whole pool look cloudy and green.
Test & Balance The Water Chemistry
In prevention and treatment, water chemistry is one of the most important steps to getting and keeping your pool algae-free.
You need to test your chlorine and pH levels with a good test kit , and bring your pH level to about 7.8 by adding sodium carbonate to increase it or sodium bisulfate will also need to make sure the chlorine is at least above 1 ppm.
You May Like: Aria Swimming Pool
Read Also: How To Clean Plaster Pool
Go From Green To Clean
One of the most prevalent problems that pool owners deal with is algae. This is especially true in warm, humid states like Florida and throughout the South. How does algae get in a swimming pool in the first place? Wind, rain, contaminated swimsuits or even pool cleaning tools can bring algae spores into pools. The presence of nitrates can also help contribute to algae blooms. Combine this with a lack of good circulation, filtration or sanitation and you have a recipe for algae. Algae multiplies rapidly on warm, sunny days in above or inground pools. When conditions are right, an algae bloom can occur in a matter of hours.
Whats the best way to get rid of green algae?
Suncoast All In One Algaecide is the best way to get rid of algae in your pool. It kills and prevents every type of algae, including black, green and yellow mustard algae, as well as pink bacteria. In addition, it has clarifying properties to help keep your pool clear.
This free-floating algae variety, which imparts a cloudy green color to the water, is easy to correct if treated early. Getting rid of it requires only 2 chemicals. Just follow the instructions below and you will be back to blue in no time!
1: Adjust pool water pH to normal range of 7.4-7.6 and the alkalinity to 80-120ppm. Your neighborhood Pinch A Penny offers free water tests to help you with this step.
3: Brush the pool walls and let the filter run continuously until it eliminates the algae.
6: Repeat step 2 after 48 hours.