Friday, July 12, 2024
HomeExclusiveHow To Get Rid Of An Inground Pool

How To Get Rid Of An Inground Pool

- Advertisment -

You’d Rather Use The Space For Something Else

Getting rid of algae in your pool

If your home has a fairly small backyard and the pool takes up a great deal of itas in fence-to-fence poolthen it might be a good idea to raze the pool, especially if you plan on residing in the house for several more years.

What could you put in place of your pool? A patch of lawn, a garden, a patiothe choice is up to you.

How Do Nitrates Get In My Pool

Nitrates are a plant nutrient. Anyplace where plants grow, there are nitrates. Every pool owner interested in maintaining a pristine pool should become familiar with nitrates and how they are introduced into your pool at high levels that cause problems. The following are a few of the ways nitrates enter your swimming pool:

· Nitrates are in man-made fertilizers. When you fertilize the colorful foliage around your pool, you have created a situation in which your pool is likely to be contaminated with the nitrates in the fertilizer. The wind could blow in the fertilizers. It is common for runoff from watering plants to go into your pool, often bringing nitrates along.

· If you have a dog that gets into your pool, nitrates from plants are most likely getting into your pool from the dogs hair.

· Other animals can also contaminate your pool with nitrates. Birds, for example, can contaminate your pool with their droppings, even if they are near your pool. Pools with screens above especially attract birds that perch and drop excrements that are rich with nitrates.

· Rainwater is a top reason for high nitrate levels in your pool.

· Human sweat and product residue including make-up, lotion, and shampoo add to the nitrates in a pool. The nitrate level is dramatically increased by the presence of urine and feces particles.

· Sometimes the tap water used to fill the pool contains an excessive amount of nitrates. In these cases, draining and refilling wont help.

How To Properly Remove An Inground Pool

Outdoor Living, Repairs & Advice

A Glendale, Missouri home had an inground gunnite pool installed in 1964 . When Mosby Building Arts clients bought the house over 20 years ago, the family was thrilled to have a pool. It brought countless hours of fun and maintenance.

With the children grown and moved, the pool was used less often and became a huge maintenance issue that was facing upwards of $30,000 in repairs. Longing for a lower-maintenance backyard, it was time to remove the pool, replace the railroad tie retaining wall, and install a new paver patio.

There is a quick way to fill in a pool. There are plenty of Youtube videos showing a one-day job from demolition to newly level yard. What those videos dont show is months or years later when the ground begins to settle, or sink holes appear, or improper water drainage creates a swamp.

There is a proper way to remove and fill an inground pool to avoid future headache, damage and expense. The following photos show the steps.

The Mosby construction crew began, with a bobcat, breaking up the surrounding concrete deck , and poking holes in the walls and floor of the gunnite pool. This is so collected water from the surface and underground moisture can flow freely and drain properly.

The gunnite and concrete debris is pushed into the pool to help fill the hole . This reduces the amount of gravel and soil filler needed, and reduces the expense of hauling off debris. Its smart to recycle these materials.

Read Also: Heater Chiller Combo

How To Treat Algae In A Swimming Pool

This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.There are 9 references cited in this article, which can be found at the bottom of the page. This article has been viewed 121,733 times.Learn more…

If you want to keep the water in your pool looking clean and clear, you’ll occasionally have to remove the algae that can cause your pool to look green, yellow, or black. We’ll help you tackle all the different types of algae that could be affecting your water!

Do You Need A Ground Service To Remove A Pool

How to Remove Stains from a Pool Liner

The ground will have fewer issues with sinking because the compacting process will be simpler. No buried chunks of debris will remain to create underground cavities. You will need a professional inground pool removal service to remove the pool, but some of the surface landscaping you may be able to do yourself.

You May Like: Winstar Pool Hours

Clusters Of Ants In Pool Why Does It Happen

Ants can infest your pool anytime during the year. However, its the spring and summer months when the ants are most active.

Its during these months, and after heavy rains, youd observe clusters of ants in your pool.

Youll find chunks of floating ants in the middle of the pool, near the skimmer and the pool return jets.

The worst part? That can also mean that ants have also infested the pool pumps and filters.

Youll find out the reasons for clusters of ants in your pool in a minute, but first, lets find out what types of ants infest swimming pools.

There are three types of ants that youd find in your pool. These are the big head black carpenter ants, tiny red ants, which are also known as fire ants, and the flying ants with wings.

Flying ants with wings are sexually mature ants. Ants develop wings when theyre about to mate.

After mating, they shed their wings and establish a new colony where they can lay eggs.

Thats a different story altogether.

For now, lets get into the reasons for these clumps of ants floating in your pool.

Advantages Of Full Pool Removal

Less impact on home sale

If you ever intend to sell your home, a full pool removal will have less of an effect on your buyer’s decision than a partial pool removal would.

This is due to the fact that there are no limitations associated with building on the area where the pool once was. It’s as if the pool was never there.

Less chance of backfill errors

A full pool removal means there are no chunks of concrete that need to be properly accounted for during the backfill and compaction process.

Compacting just soil is simpler and less prone to the seepage that can occur from partial removals when the concrete hasn’t been layered properly.

You May Like: Unclog Pool Skimmer

Cost To Fill In A Pool

The average price to remove a swimming pool falls between $3,000 and $10,000. The cost to eliminate an above ground model averages $2,700. An inground unit can be extracted for $9,000 to $19,000 or filled in for about $5,000.

A homeowner may choose to scrap their swimming pool for a variety of reasons, whether for safety reasons, no longer wanting to pay for maintenance, replacement of an old model or for landscaping reasons. In any scenario, this is no small task. The job involves heavy-duty equipment and machinery, safety gear, city and/or county permits and debris removal. It’s important to hire a pro for a removal project.

Convert Your Pool Into A Garden Plot

How we Remove a Swimming Pool

The good news is that you dont have to completely remove the pool in order to convert it into a garden space.

However, keep in mind that its also not as simple as filling in the pool with dirt, and thats it. Its important to drain your pool and drill holes in the bottom for adequate drainage. Its also crucial that you purchase the right type of garden soil and it is compacted well so that your garden plot does not sink over time.

If your pool was surrounded by decking, this must be removed or buried beforehand, too. When filling in a swimming pool with dirt, remember that you still have to disclose its existence when selling your home.

Also Check: Is The Venetian Pool Open

Cause #: Circulation & Filtration Issues

Pool water that isnt being properly circulated is always at risk of becoming cloudy water.

Thats because circulation pushes your pool water through your filter system, so without it, the filter cant work its magic and keep your water squeaky clean.

There are a few moving parts to this, so lets go through them.

Is Your Pump Powerful Enough?

A pool pump is a core part of your filtration system as it cycles your water through the filter in order to remove debris and maintain circulation, this prevents the water from stagnating which eventually breeds other problems.

With that in mind, you need to make sure your pump has the ability to cycle the entire contents of your pool at least once per day. Whats more, youll need a pump that can complete a turnover in an 8 hour period.

The speed at which a pump completes a turnover is based on two factors:

  • The volume of water in your pool
  • The flow-rate of the pump itself
  • Note: Flow-rate tells you how many gallons of water pass through the pump each minute, and its appropriately measured in gallons per minute .

    To properly size your pump, divide your water volume by 8, then divide again by 60. What youre left with is your pools required turnover rate in GPM. The flow-rate of your pool pump should be at least the same.

    Is Your Pump Suited To Your Filter?

    You wouldnt put all that effort into correctly sizing your pool pump only to neglect your pool filter, would you?

    Are You Maintaining Your Equipment?

    Why You Should Hire The Pros

    Pool demolition and removal is a big job that requires the right equipment. And if not done properly, it can lead to costly problems for you and your property.

    If the pool removal is not completed properly, there will be an increased risk of:

    • The ground swelling
    • A lack of proper drainage
    • Damage to driveways, septic tanks, sewer connections, surrounding landscaping, and other areas of your property.

    A professional pool removal contractor will avoid this costly damage. They will assess the location and accessibility of the pool and know which type of equipment to use to complete the project carefully without damaging your property.

    Professional pool removal contractors know what theyre doing. So instead of winging it and trying for a DIY project or hiring you handyman/brother, hire the pros. And get your pool removed or filled the right way so you can start enjoying the many new uses for your backyard space and landscape.

    Recommended Reading: Hide Pool Filter

    Is It Possible To Get Rid Of An Inground Pool

    Whatever the reason, removal or repurposing on an inground pool can be challenging, expensive or even dangerous. For those considering getting rid of an inground pool, research is key, but the results can be well-worth the effort. Here are a few options for those looking to become former pool owners.

    What Causes Pool Algae

    #diy #poolcover to get rid of rain and melting snow, #DIY ...

    As with all maintenance, the best defense is a good offense. Keep up with your regular care, and youll have a much lower chance of algae making an unsolicited guest appearance. We recommend salt water chlorine generators for this.

    Algae usually grows when chlorine is low and pH is high or low.

    Stabilizer provides a buffer so that UV light doesnt eat up your chlorine. If you dont have enough stabilizer, then you can dump all the chlorine you want into the water, but it wont last.

    Heads up: the stabilizer is called CYA. This doesnt stand for what youre thinking. It means cyanuric acid.

    In a salt water pool, these can cause low chlorine levels:

    • The salt is low.
    • The salt chlorinator system is not functioning correctly.
    • The stabilizer is low.

    One big way to keep the pool water moving around is to use your pool. What a struggle that will be. Swim to your hearts content and know that its for the benefit of everyone.

    Read Also: Discount Inground Pool Kit

    Problem : Lacking The Proper Equipment And Tools And Experience To Use Them

    When it comes to DIY pool removal, many times, homeowners dont have the proper tools and equipment to get the job done. The solution to this is renting the tools and equipment to get the job done, but if you arent used to using the heavy-duty equipment needed, you put yourself at risk for major accidents.

    Additionally, when youre working on your own DIY pool demolition, its easy to get caught up in the process and forget that you need to be careful with heavy machinery on your yard. You could easily crush your plumbing pipes, destroy your sprinkler lines, damage your septic tank, or worse. A professional pool removal company will be comfortable with the equipment and experienced to watch out for danger zones.

    Disadvantages Of Full Removal Vs Partial Removal

    Cons of Partial Removal

    • You will no longer have a pool to swim in. If you love swimming and use your pool often, then the benefits of owning a pool will likely outweigh the costs.
    • You will need to disclose the pool removal to future homebuyersand it might affect the value of your home.
    • Many municipalities consider the location of the filled-in pool as non-buildable, so you cant build dwellings where your pool used to be. But the area can still be used for sheds, patios, concrete, trees, and landscaping.

    Cons of Full Removal

    • You will no longer have a pool to swim in. If you love swimming and use your pool often, then the benefits of pool ownership might outweigh the costs.
    • Many municipalities consider the location of the filled-in pool as non-buildable, so you cant build dwellings where your pool used to be. But this area can still be used for sheds, patios, concrete, trees, and landscaping.
    • Complete pool removal is a more expensive option than partial pool removal.

    Don’t Miss: Can Vdara Use Aria Pool

    Do You Need A Permit To Fill In A Pool

    That depends on your local government, but in many cases, a permit is required.

    The cost of a permit can be anywhere from free to several hundred dollars depending on your local municipality.

    Many local governments have rules regarding how a pool must be removed. Some may have zoning ordinances or codes stating that a pool must be completely removed, not just filled in. If partial pool demolition and removal is allowed, there may be specific protocols on how the pool must be filled in

    Get Rid Of Ants On Pool Deck

    How to Get Rid of YELLOW MUSTARD ALGAE in a POOL | Swim University

    Your pool deck, either wooden or made of concrete, is a place from where ants can get into your pool.

    Its highly possible, especially when there are ant nests underneath the pool deck.

    Pool decks can also develop cracks on them over time. Those cracks are the places where ants hide and build nests.

    Check for those cracks. If theres any, caulk those cracks with a good quality sealant.

    Also, if theres a gap between the pool deck and the soil underneath, sprinkle Talstar PL insecticide granules underneath the pool deck.

    Itll clean the ants hidden underneath the deck.

    Other ways to eliminate ants on the pool deck area are using an anti-ant spray or diatomaceous earth.

    Dont forget to clean the deck of any dirt or debris and dead ants.

    You May Like: Clorox Pool And Spa 3-way Test Kit Color Chart

    Thinking About Getting Rid Of An Inground Pool

    If youre looking to get rid of your swimming pool for the best possible cost, JM Concrete Pros are your go-to for affordable and professional pool removal.

    With years of experience in concrete demolition, fill-ins, resurfacing, and repair, get in touch with our team for highly recommended service you can rely on!

    Request your free estimate today, and our experienced team will schedule a meeting to discuss your ideas.

    Problem : Not Choosing The Right Swimming Pool Removal Method

    When it comes to inground pools, there are two main ways a pool removal can be done: a partial pool removal and a full pool removal. Both options have the choice of non-engineered backfill and engineered backfill.

    With above ground pools, the process is a lot simpler, but still not easy. The pool is drained, disassembled, and hauled away. Then the area where the pool was is filled in with sod or other landscaping.

    When you decide to DIY an inground pool removal, you take the chance of messing up the entire process and making the area a dangerous place. You also need to understand the methods of pool removal and how they impact your future property values and what you can do on the land. For example, if you dont move forward with an engineered backfill, you cant build upon the space to expand your house in the future.

    Read Also: How To Build An Inground Pool Yourself

    Installing A New Pool

    Some homeowners remove a pool to replace it with a new one. Typically, the installation of a new swimming pool costs$17,000 to $45,000. People often opt for this choice when their existing one hasn’t been properly cared for and is suffering visible structural damage, or they are looking for a more modern look or more economical size.

    If your goal is to replace your pool, your project will be more expensive and take longer to complete than if you were simply taking one out. You should expect to pay added labor and material fees. However, you won’t have to worry about filling in the space since you’ll be installing a new one, which can save around $15 per cubic yard.

    Get a Pro Pool Removal & Fill In Quote

    The common tools involved include:

    • Excavator with rubber tracks.
    • Truck for pouring in fill.
    • Dumpster for storing debris and hauling it away.

    Typically, a contractor includes these charges in his or her estimate. If this is a DIY project, it could run a homeowner up to $2,000 to rent equipment for a few days.

    Another item that might add to overall price is access. If it’s tricky to get the required equipment into your yard for the teardown, fill-in, and haul-off, then the cost of the project could rise substantially.

    - Advertisment -

    Most Popular

    - Advertisment -