Things To Consider Before Installing An Inground Pool
The thought of having a swimming pool may fascinate you, but you need to consider a few factors before getting one. Not only does installing a pool cost a significant amount, but if youre not careful, it can also cause some safety hazards.
Here are a few safety and cost tips for inground pools that will help you make an informed decision:
How To Build The Cheapest Inground Pool Possible
Everyone wants to save money on the things they have to buy. But when it comes to a luxury item particularly one that will be part of your home for many years seeking the lowest price isnt wise if it means sacrificing quality.
Thats certainly the case with an inground swimming pool, which is both optional and permanent. If youre looking for the cheapest inground pool you can find, you might be on a fools errand.
That said, there are legitimate ways to keep costs under control while still getting a top-notch addition to your home. The key is to look for the lowest price within the selection of pools that meet your standards. Here are five ways to save money whether its a few hundred dollars or thousands.
How Will A New Pool Affect Your Home Value
Do not install a pool as an attempt to increase a homes value. Pools have either a neutral or negative effect on home value. Very few home buyers specifically want a pool. Some will buy a home with a pool because they want the house for reasons other than the pool. Others walk away just at the thought of owning and maintaining a pool. A new pool installation is a big project that you shouldnt take lightly. Doing it right requires a little self-reflection and a bit of research and planning. However, its a big investment in summertime fun and relaxation that you can enjoy for years to come.
Read Also: What Hotel Has The Best Swimming Pool In Las Vegas
Fill Swimming Pool With Water
At this stage, it means you have gotten almost to the completion of the entire process.
What youve got left at this point are the simple finishing operations just before you use your swimming pool.
Swimming pool full of water Photo Credits: XTEND STUDIO
Filling the pool depends on how you did your plumbing.
If you had an internal inlet, you can just open the source and let the pool filled to the bream.
If not, you can outsource a water supply company on the other hand to fill the pool.
It is at this point that you also need to re-check the entire pool to determine whether there is further leakage.
And the most critical aspect of this phase is to make sure that you fill the pool using clean water.
It should be from any unwarranted chemicals and free from toxins or any contamination.
This can turn out to be a disaster if you opt to fill the pool with any of that kind of water because for one, you might get an infection.
Besides, you might end up incurring extra cost, wasting time and effort in draining off and refilling the pool.
Factors Authority Consider Before Approving In Ground Swimming Pool Construction
Normally, the authorities will consider a range of factors before approving your designs. They may visit the site, conduct experiments, do surveys, etc.
This will ensure you dont contravene any laws or by-laws.
They do this to ensure the following:
- Promote Safety Standards
Ideally, the essence first is to promote safety standards. The authorizing bodies have the mandate to assess whether or not the proposed swimming pool is secure for human use.
- Swimming Pool Design and Site meet the Set Construction Standards
You may have the best design however, it may not meet the construction standards and requirements. Besides, the site where you want to install the in ground pool could be a public property.
Or, it may interfere with other utility infrastructures.
The fact of the matter is
Depending on the design and site where you intend to install the in ground swimming pool, the authorities may:
- Approve the design, thus you will get the permit
- Propose adjustments in the existing design
Once you get the swimming pool permit, youre now free to commence your work.
More resources:
Also Check: Can Vdara Guests Use Aria Pool
Cost To Put In An Inground Pool With A Hot Tub
For an inground pool with a hot tub, you can expect to add $8,000 to $25,000 to the base price depending on the style of hot tub and how its integrated with the rest of the swimming pool. Pool contractors normally offer to include the hot tub with the inground pool as part of their estimate, with discounts for getting both done simultaneously. Hot tubs vary in price depending on the number of jets, quality of materials, and the number of people they seat.
- Entry Level $2,000 to $4,000
- Medium Quality $5,000 to $8,000
- High End $9,000 to $12,000
- Premium $13,000 to $20,000
Cheap And Simple Inground Swimming Pool
If you buy one from a professional pool company, an inground swimming pool will easily cost you about $10,000 or more. You can build your own, and one that looks just like it was professionally designed, for less than $3,000. Imagine what you can do with that extra $7,000! This one is really simple. Once you get the hole dug, you just follow the easy steps to finishing your pool and you end up with something that looks like you paid tens of thousands of dollars to have it installed.
Recommended Reading: Concrete Pool Deck Cleaner
Inground Pool Steps: The Detailed Basics
There are several ways to get into a swimming pool for inground pools with deeper depths especially- slide, dive, or belly flop, the choice is yours! But you have to allow swimmers a safe and easy way to exist the pool. For that you need at least one step . This will also be appreciated by those who prefer to ease into the pool instead of testing their cannonball skills.
For above ground pools, step or ladder options are pretty self-explanatory. In this article well be looking at the step options for inground vinyl liner swimming pools.
Drop in Steps
First, the easiest step to address is the Drop In. Drop In steps are typically added to an existing pool that was built without steps. These are much more affordable than doing a major overhaul on the existing pool structure, and a quick way to provide easy entry compared to a typical ladder. There are several different styles and colors available. The most cost effective version is a molded plastic step that literally is just dropped into the pool. The more visually appealing option is a vinyl over drop in step that allows for seamless look. These are a great way to upgrade the look of your pool especially when it’s about time to replace your liner as your liner would have to be remade to go over vinyl over steps anyway.
Bolt on Steps
Depending on the step you choose, you can also decide if you want bull nose, or cantilever style to match your coping type.
Bullnose Coping Step
Cantilever Coping Over Step
Vinyl Over Steps
S Required Before Receiving Your Permit To Install Your In
Before adding or building anything onto your home, a permit is required, and the same rules also apply to installing an inground pool. Prior to receiving a permit, an outline on the site and planned position of the pool must be submitted to your city. If the plan indicates a septic system within proximity of the pool, this can pose a problem as there are stipulations and concerns surrounding the size of the pools leaching system versus the size of the septic system.
The requirement set by public health officials is the need for adequate separation and distances between inground pools and septic systems. An in-ground pool is expected to be 25 feet away from sewage systems. This distance is 10 feet more than the anticipated distance above ground swimming pools are required to follow.
You May Like: How To Polish Pool Tile
Phase 4 Forms & Excavation
Now here is where the real fun begins, breaking ground with the heavy excavation equipment. All has gone well, the weather is perfect and we are ready to carefully open the ground in the exact outer shape of the swimming pool. Our team of swimming pool excavation experts will amaze you with their professional abilities. It takes approximately one full day to properly excavate a swimming pool in preparation for the structural reinforcement stage.
Our excavation advantages:
- Over excavated for strength, up to 10 standard pool floor thickness.
- Soil reclamation, when applicable conserved for adjusting the topography of your yard for drainage purposes.
- Haul away excess, included when saving spoils is not applicable.
Read more:
Design: Choosing The Pool That’s Right For You
Before you begin scheming your personal pool design, get an idea of what pool types are even possible. Maybe you want an infinity edge, for framing the horizon, or a cocktail pool that’s only waist-deep for happy hours. Also note that depth, shape, and landscaping aren’t just for funthey also all play a pivotal role in the overall safety of your pool. There are three main approaches to consider when building a family-friendly pool and backyard.
Use Case
Think again about how you’ll use this pooland how much space to dedicate to certain functions like shallow play space, or a hot tub in the pool. If you’re having a hard time choosing between or balancing the two, “Ask yourself: What matters in 5 minutes? 5 days? and 5 years? Kids’ needs will keep changing, so a jacuzzi has a much longer of a lifespan as they wont be splashing around for their entire lives,” Feldman advises.
Safety
Cost
On average, you can plan to spend at least $35,000 to install an in-ground pool, according to HomeAdvisor.comand that doesntinclude the maintenance that follows. You should be putting in a poo lfor yourself, not because its going to make the house more attractive to buyers, say sNew York area Realtor Robert Khederian.To take out a pool is a lot of money, too.
Cost: $
Cost: $$$
The look: Matte and modern. Unlimited design potential.
How its installed: Shotcrete, whether wet or gunite, is pumped into a rebar-framed hole, smoothed, and plastered.
Also Check: Vdara Hot Tub
Excavation Of The Pool: Day 1
The actual excavation. At this stage we have earth being moved, machines on the move and a lot of activity happening. Depending on the size of the pool and the size of the excavation equipment, it may take only a few hours or a couple of days to dig the actual pool. In the case of bedrock excavation, it can take a number of days to break the rock and shape the hole.
What Comes In A Vinyl Liner Pool Kit
A standard inground vinyl liner pool kit will typically include steel or polymer wall panels, coping, a pool pump, filter, and skimmer system, the vinyl liner, and possibly some accessories like cleaning equipment.
Your biggest challenges: Getting the vinyl liner fitted just right and assembling the pool.
Also Check: Hide Pool Filter
Cost To Put In A Saltwater Pool
Saltwater pool installation costs range from $29,000 to $57,000 when building new. When converting from a chlorine pool to saltwater, costs range from $600 to $2,200, or about $870 per 10,000 gallons to install a saltwater chlorination system, also known as a salt chlorine generator.
A saltwater pool is still a chlorine-treated pool, but the chlorine is created by turning the saltwater into the necessary amounts of chlorine through electrolysis. The benefits of a saltwater pool include not having the smell and irritation of chlorine on the skin and the lower maintenance costs of $45 per month, or $80 to $150 per month if you pay a cleaning service.
Vinyl Underground Pool Prices
The average vinyl inground pool costs between $25,000 and $45,000, and between fiberglass, and concrete, vinyl is the most affordable option. Although the initial price is lower, the long-term cost to maintain a vinyl liner pool is $13,250 over ten years.
- Like fiberglass, vinyl pools are available in a range of predesigned shapes or as a custom solution to suit your vision.
- Its easy to clean, resistant to algae, and have a smooth finish.
- The vinyl is a liner shaped from thermoplastic or steel panels which is placed over the pool structure, and it will have either a concrete or sand floor.
- Vinyl pool liner replacement costs$3,000 to $4,000 and needs to be replaced every 10 years.
Don’t Miss: How To Build An Inground Pool For Cheap
What Will Happen To My Yard
Unless youre spending thousands extra on some hitherto unknown pool builder who uses a helicopter to remove excavated dirt and bring construction materials on-site, your yard is going to become a full-blown construction site.
This means you can kiss all the grass around the pool goodbye. Same goes for a roughly 20-foot by 20-foot area for all the materials.
The access lane might also incur some damages after having heavy construction vehicles using it.
S To Fully Completing Your Inground Pool Installation
04/ 12/ 2015
Campbell Pools has completed thousands of inground swimming pool installations over the 25+ years we have been doing this. Clients are extremely happy to see us working with professional processes that are proven and consistant.
We have put together this post with the major steps of building an inground pool. Of course, there is fluctuation based on pool design, weather and features, but this overview should prepare you with what to expect when you decide to get a pool.
You May Like: Pool Heater Btu Load
Stripping Of Concrete Forms And Clean
Within 24 to 48 hours after the concrete is poured the crew will return to remove the forms, clean-up and cut the expansion cuts to prevent hairline cracking.
With the concrete crew done we are now in the homestretch. We should be close to two weeks into the project and its at this point we would hand over things to a landscaper if interlocking stone is being installed. How long it takes for them to finish their work and hand things back to us for the final completion will vary tremendously depending on the scope and complexity of the their work.
But lets assume that there is no stonework and weve finished with the concrete deck. Lets get the project finished up.
Plunge Pool Construction Cost
Cocktail pools or plunge pools cost between $14,500 and $25,000 to install. They are usually small at 10 x 15 20 and 5.5 to 7 deep, and pool users cant dive into them, so they are used more for entertainment purposes than serious swimming. Plunge pools are also great for quick cooling purposes and relaxing on a floatie.
Recommended Reading: Ways To Hide Pool Equipment
What Is Your True Budget
A new in-ground pool will cost from $20,000 to $60,000 or more. Most pool customers use a combination of cash and financing. To plan a pool budget, you need a clear picture of how much you can afford, how much you are willing to pay, and how much your new pool will cost. The pool will not increase a homes value. Plan the pool budget based solely on the value of enjoyment. Figure a total project cost based on a percentage of the homes value about 15 percent is a good starting point. Then interview three or four good swimming pool installation contractors. In addition to their quotes, verify their work quality, warranty policies, client references, licensing, bonding, and insurance. Pool customers finance their new pools in one of four ways: home equity loans, home equity lines of credit, cash-out refinancing, and personal loans. The first three require having enough equity in a home to obtain the amount of financing needed for your pool. Personal loans do not require collateral.
The Time They Can Take In Building
Each type has a significant difference in time in installing. Because they all have different factors and materials, some require them to be made on-site, while others are manufactured already. But lets talk about how long it takes to put those inground pools? And why.
Fiberglass pools dont require as much construction time as others because the structure is pre-made. Often times, you cant have customized fiberglass pools however, you can choose which one you may like.
The entire process can take up to 2 weeks, combining the construction time. Sometimes you may hear someone saying how a pool was built within a day in their neighborhood or somewhere, which in most cases is the fiberglass pool.
Their shell is delivered home, and the actual process can take a few days if the conditions are right, but mostly, it takes at least two weeks. The one-day talk is for promotional gimmicks the actual time is much longer than that.
Vinyl liner pools are neutral in time because, depending on the builders, it can be built as fast as fiberglass or can take as much time as concrete pools. Most of the material needs to be assembled on-site however, the labor work in this pool is much less than the concrete pools.
Their typical installing time is 2-4 weeks, which can drastically change depending on your workers.
This pool takes more time, but if you have patience and a higher budget, this pool is also more durable, guaranteeing you 50+ years of suitable condition.
Read Also: How Long Do Inground Pool Liners Last
Designing An Inground Pool Around Your Lifestyle
Our pool design experts work closely with your family to envision and implement a design plan that is perfectly suited to your lifestyle and your home. We guide you along from the initial design stage, work with your local town to get all your permitting, and through to the construction process to make sure your in-ground pool is built to the highest quality standards in the industry.
