Tuesday, September 20, 2022
HomeGroundHow To Set Up An Above Ground Pool

How To Set Up An Above Ground Pool

- Advertisment -

Buying Process & Reputable Retailers

How to Set Up an Above Ground Pool

Once youve made the decision to purchase an above ground pool, the process becomes fairly easy even something that can be accomplished without ever visiting the store if you prefer.

Your sales associate, whether in person, via email, or via phone, will walk through any last questions you may have and then will simply get the information from you regarding the pool model and size you would like and any accessories or upgrades you would like to add on with the initial purchase.

They will get information from you concerning your location and site for installation so they can add in installation costs and estimated excavation costs , assuming you choose to have the pool installed by one of their installation crews.

From this point, the next person you will most likely hear from is the individual responsible for scheduling the pool installation they will either be calling to set up an installation date/time or to confirm the installation time if one was set at the time of your pool purchase.

Now you are in the hands of the installation crew. While that crew is on site doing the installation, they will walk through the pool and the steps you need to complete once the pool is full, and you can ask any questions that you may have.

Watch the video below to learn about our free consult and a bit about our showroom:

How To Set Up An Above Ground Pool On Grass

Avoid these common mistakes when building your above ground pool.Begin installing the wall into the bottom rails.Build a sand cover or.Building up the low areas with dirt taken from the higher areas.

Consider using grass killer even after you have removed all turf.Do a visual inspection to check for any spots that are higher or lower than the rest.Free from roots and debrisFriends and family all can rejoice now that youve opened your pool for the season and the parties begin in full.

I always have an above ground pool in my yard in the summer for my kids, so i wanted to know can i put a swimming pool on artificial grass.If the ground is not leveled you need to take away 1 off the top for the floor to level.If you are pushing the dirt around to level out the site for the pool, eventually the dirt will settle and your pool will no longer be level.If you have an above ground pool with solid walls, youll need to:

If your child has an accident in the pool, you can disinfect the pool with soapy water or household bleach.It is also important to note that placing tens of thousands of pounds on almost any surface for an extended period of time has the potential of causing a.It may result in significant amounts of water being sloshed out of the pool.It rolls along the ground and drags a blade that moves forward & backwards cutting just below the surface of the grass.

Set Up Your Pump Filter And Other Equipment

Youll need to bring your pools hardware back to life after a long winters slumber. The mad scientist goggles and lab coat are optional.

First, put back all the plugs to the drains and pressure gauges to your pool filter system, pump, and other equipment.

Next, attach your systems hoses to your equipment, and double-check the connections.

  • Connect the skimmer to the pool pump.
  • Connect the pump to the filter.
  • Connect the filter to the heater, chlorinator, and any other extra filter equipment. If you dont have any, attach the hose directly to the return inlet.
  • If you have a multiport valve, make sure its turned to the filter position.

    Don’t Miss: How To Repair Pool Deck Cracks

    Walled Above Ground Pool Set Up

    If you have an above ground pool with solid walls, youll need to:

    • Lay out and attach the bottom wall rails. You can add cement or plywood blocks under the connecting plates.
    • Begin installing the wall into the bottom rails.
    • Build a sand cover or use a foam cove all the way around the walls.
    • A sand cover should be about 6 to 8 high and beveled at a 45 degree angle. This prevents the liner from slipping under or becoming damaged by the wall or rails.
  • Install the upright supports.
  • Install the liner and liner clamps.
  • Put on the top rail.
  • Smooth out any wrinkles in the liner.
  • Set up and hook up your hoses, filters, pumps, skimmers.
  • Begin filling the pool with water.
  • Add chemicals as per the above ground pools opening procedures.
  • Above Ground Pool Kit Price

    How to Set Up Above Ground Pool on Unlevel Ground

    The actual pool will cost approximately $1,700 for an all metal 18 pool and go up to $7,500 for an all resin 33 pool. You will find the all metal pools to be the most inexpensive option, while the all resin pool will be the most expensive pool kit. If there is a hybrid pool option, it will be priced somewhere in between a metal and resin pool kit.

    BONUS: If you have ever wanted to see an above ground pool kit be manufactured, here is a great video that gives a high level overview of the process. Note that installation in Oklahoma has a few differences than what is shown on the video.

    You May Like: Clorox Test Strip Chart

    Find Space For Your Pool And Start Clearing

    Your first step is decide where you want to install your swimming pool. We highly advise you do this first exercise before chosing your pool size. Insert a steel rod where you want the center of your pool to be. By taking the pool size and dividing by two, you can use use a measuring tape from the center rod and make a circle. Take a rope or an extension cable and lay it down to visually see where the pool will end up.

    Make sure there are no obstructions in that area. Also determine where your pool equipement will be. It is recommended that your equipement stays within 4 feet of the wall . This puts less pressure on your pump. We have many clients that request to have the equipement set much further away. Just remember that aboveground pool pumps are gravity fed. This means it must be lower than the hole where the skimming water output is.

    Once you know and you have marked where the pool and the equipement will be, it’s time to get your hands dirty.

    If you are on grass, then use a sod cutter . Remove the sod in all the areas your identified where the pool will go. Start with cutting 1 extra foot around the pool. Do the whole circle around to start, and then make lines across the center, and remove everything inside.

    Pro Tip: If you cut the sod in long streeks, you can roll them up and use them later around the pool area to create a smooth elevation around the areas you had to dig.

    So if you do like us, start digging and bring the dirt to a corner or the house.

    Above Ground Pool Installation Items

    The following are links to various sections on our website ThePoolFactory.com where you can select pool liner installation items based off your above ground pool size.

    Pool Cove is foam that easily peels and sticks to the inside base of the pool wall. The foam pool cove is 3-3/4 inches high and must be installed on top of 3 inches of sand. This will give you a total height of about 7 inches, the recommended height to support the liner and eliminate stress at the seam of the pool liner.

    You May Like: Countryside Ymca Outdoor Pool Hours

    How To Set Up A Bestway Power Steel Frame Pool

    So its hot out and you want to go swimming. While some of us may not have a budget to have a pool installed there is a more budget friendly option of installing an above ground pool yourself. And nowadays it is so much easier to do with Bestway Pools.

    They offer a variety of pools in all shapes and sizes to choose from that will fit in anyones budget and backyard. Plus, setting up one is so much simpler than you think and can be ready to swim in the same day.

    If you are looking for a sturdy above ground pool that will last longer try a Bestway Power Steel Frame Pool. You can read my full review about it and learn how to set one up with the simple instructions listed below. The more people you have to help you set up the pool the faster you can get it up to enjoy hours of fun.

    Remove Sod And Rake The Area:

    How to set up an Intex above ground pool setup review professionally

    Pools cant be installed on grass. The grass will rot and affect the pool liner. Plus, grass can shift or settle over time, making it unstable. This means you need to remove the sod from the marked area. Rent a sod remover from your local hardware store or equipment rental shop to make this job easier.Once youve dug up the sod you need to rake the area to remove any remaining grass, roots, rocks or other debris .Check that the area is level again. This is such a critical step its important to check everything is level over and over again throughout the installation process.

    Read Also: Intex Pool Material

    How To Set Up Above Ground Pool

    The Pool is a place that is filled with water in order to swim and relax in hot weather when you are full of sweat and even the air conditioners fail to calm down the weathers warmth. In such cases to have a pool built in your house proves to be the best option. You may keep it small or large depending on your priorities as well as space and requirements and you can keep it above or below the ground as well. The below ground level is common to almost all of us but in case you wish to set up above ground pool, you may choose to go for the tips that we are mentioning here:-

    Installing A Pool With A Sand Base Foam Cove And Liner Floor Pad

    Step 1

    Using fine sand , lay a 3 thick bed of sand across the entire inside of the pool this will form your base.

    Step 2

    After installing the 3 sand base, lay the liner floor pad on top. Please note your liner floor pad is pre-cut to fit your pools exact dimensions.

    Step 3

    Attach the pool cove directly on top of the liner floor pad by removing the adhesive backing and sticking it to the metal pool wall .

    Step 4

    This is the completed above ground pool liner installation. The vinyl pool liner should be completely supported by the pool base to avoid any stress or damage to it or the metal pool wall.

    You May Like: Lowes Pool Repair Kit

    Shop Our Selection Of Round Above Ground Pools

    There is no better way to relax on a warm summers day than by dipping your toes in a swimming pool. Having a pool in your homes backyard can help you and your family have all the fun together. Watsons has been in business for more than 50 years and has the nations largest selection of round above ground pools available, including model sizes ranging from 15 feet all the way up to 33 feet, all at the guaranteed lowest price in the USA.

    If youre adding an above-ground pool to your homes backyard space, youll need to take a few key considerations to make sure you find a swimming pool that best works for your home:

    How To Build An Above

    How to Set Up an Above Ground Swimming Pool

    Nothing says summer fun like a pool. Whether youre entertaining guests or just relaxing in the sun, owning a pool can transform your backyard into a summer retreat. But, with the average cost of installing an inground pool ranging from $28,000 to $50,000, the notion of installing one can seem more like a dream than reality. However, many homeowners have recently shifted toward above-ground pools a much more affordable option with benefits that don’t stop with the cheaper price tag.

    Keep reading to learn all the things you need to know and decisions you need to make before breaking ground on your new above-ground pool, followed by a step-by-step overview of how to build one.

    Recommended Reading: De Powder Leslie’s Pools

    The Importance Of Getting Off On The Right Foot

    Do you remember the story of the three little pigs? In case your preschool didnt share that important piece of engineering wisdom with you, the moral is that doing a little bit of extra work in advance pays huge dividends in the long run.

    In the case of above-ground pools, it is essential to ensure that you have a firm, smooth, level, and flat-footing for it. If not, the following is on your horizon:

    • Your pool liners lifespan may be reduced by resting on rocks, stretching into hollows, and so on.
    • One end of your pool will be noticeably shallower than the other a slope of only 2° will tilt a 12 pool by five inches overall.
    • The uneven weight distribution places excessive strain on one side of the pool wall, making it more likely to buckle and fail.

    However, the flattest part of your yard may not be the most suitable in other ways. For one thing, youll need a lower point to drain the pool water to at the end of summer: almost all above-ground pools have a drain plug to which you can connect a standard garden hose, but this will be of little help if your pool is right at the bottom of a hollow.

    Youll also need an electrical outlet to power the filter pump. You really dont want to mess around with extension cords, using one may void the pumps warranty and carries an increased risk of electrical shock.

    Trees are to be avoided, too. Not only do they drop leaves in the water, but their shade prevents the sun from heating up the water as it should.

    before your purchase

    Clean And Store Your Winter Pool Cover

    Find a large, easily accessible area like your lawn, deck, or driveway, and spread the cover flat. Make sure the areas clear of sharp objects and other potentially damaging items.

    Wash your cover with water, cover cleaner , and a scrub brush or rubber broom.

    Scrub it thoroughly, but gently. Youll ensure a longer life for your pool cover, which can save you quite a bit of money since you wont have to replace it. Make sure you allow your cover to dry thoroughly before storing it to avoid damage from moisture and mold.

    Stash your winter cover in a durable, tightly sealed plastic tub or other large storage container during the off season. This will keep rats and other critters from making a nest in your expensive cover or, worse yet, chomping it into tiny bits.

    Don’t Miss: Is Mandalay Bay Pool Open To Public

    Slowly Fill Pool With Water

    Its recommended to fill the pool halfway then refer to the separate instructions on how to install the skimmer and return fittings. Once installed, you can finish connecting the rest of the pool equipment like the filter system and pump. After installing all the above ground equipment, you can fill the rest of the pool.

    Choose The Size And Shape Of Above

    How to set up an above ground pool & Repair

    The size and shape of the pool are important since these factors affect the cost of the pool and its maintenance, as well as its ability to fit well within your yard.

    The size of the available space helps to determine the eventual size of the pool. The cost of water should be figured in, too, since treated water comes at a cost for all municipal users.

    Above-ground swimming pools range from small wading pools to large round, oval, or rectangular pools.

    Cost to Fill Above-Ground Swimming Pools by Size
    Size

    Based on 2021 findings from Home Guide.

    Read Also: Build A Inground Pool

    Get In The Water Faster With These Tips For Installing An Above Ground Pool Should You Diy It Or Call In The Pros

    If you were hoping to install an above ground pool in 2020, you may well have found it impossible.

    Across the U.S., people stuck at home during the pandemic turned to swimming pools, as families put a lot of the money they didnt spend on vacations into their backyards. Whether that meant an inflatable kiddie pool, a more substantial above ground pool or the in-ground pool of their dreams, the result was the same a pool shortage. Manufacturers couldnt keep up with demand, and pool installers found themselves booked into 2021.

    While inventories have improved for 2021, its still a good idea to plan ahead if you want to install an above ground pool this year. Lets take a look at the practical aspects of above ground pool installation, and whether its a realistic DIY project.

    On This Page

    Tips For Filling Your Pool

  • Fill the pool half way first and then install the skimmer and filter according to manufacturers instructions.
  • Install the safety warnings because your warranty could be voided if you dont add these labels.
  • Apply the safety warnings before filling your pool to the top.
  • The water level should be one third to half way up the skimmer.
  • If you have any questions, concerns or need assistance contact Pool Supplies Canada to speak directly to one of our pool installation experts.

    With these steps you are now ready to install your own Above Ground Pools

    Orders

    You May Like: Fiberglass Inground Pool Kits Do It Yourself

    RELATED ARTICLES
    - Advertisment -

    Most Popular

    - Advertisment -