Monday, April 8, 2024
HomeCleanHow Long Do Polaris Pool Cleaners Last

How Long Do Polaris Pool Cleaners Last

- Advertisment -

Best Polaris Pool Cleaner For In

Replacing Common Wear Parts on Your Polaris Cleaner

Weight: 43.6 poundsDimensions: 22 x 18.5 x 22 inchesPros:

  • Vortex technology eliminates suction loss
  • Climbs obstacles


  • Might fall on its back

The Polaris F9450 Sport Robotic In-Ground Pool Cleaner Vacuum is a great solution for in-ground pools. Its easy to put together and place inside of your pool.

Part of its ability to clean in-ground pools effectively is because of its Vortex Vacuum Technology.

This feature allows it to pick up 4x more debris than other robotic pool cleaners.

Cleaning the robot is also easy. It has an access top that can be opened to access the filter. This filter is in cartridge form.

You can simply pull it out, then replace it with another when it starts to wear down.

Once youve replaced the cleaned filter, you can insert it back inside of the robot and swiftly close the top access. Your robot cleaner is ready to be used again.

The larger filter has 4x the capacity of other filters. That means you have to clean it less.

The robot can spend more time in the pool actually cleaning it.

This robot is also capable of 4WD. Its larges wheels enable it to climb up the walls, scrub the bottom of your pools floor, and get into the grout lines of your pool.

It also enables the robot to get over obstacles. Whether its pop-outs, stairs, or forgotten pool toys, this robot will have a hard time getting stuck.

That being said, some may discover that their robot falls when they climb the wall.

Pool Cleaner Maintenance Tips

If you want your pool cleaner to last as long as possible, its important to take care of it the right way. They dont require a lot of maintenance, but it is important to use and store them correctly. Most require very little cleaning, but if they have their own filters and debris bags, youll want to keep them cleaned out and rinsed well.

The bag needs to be emptied every time its full to keep it from losing suction and burning out the motor. But if it has a filter, it can probably be rinsed with a hose just every so often or when it looks dirty.Unless you have a robotic cleaner that is meant to live in your pool, take it out after every use. Rinse the unit off with a hose once in a while to clean off excess chemicals and store it in a dry place. Drain the hoses after use and coil them loosely to store with the pool cleaner. Its also a good idea to hang them on a wall rather than laying them on the floor to keep them clean and dry.

Suction Side Cleaner Cons

  • These cleaners use the suction from your main circulation pump to run. This means that you are taking suction away from your pool skimmers and main drain that is necessary to keep your pool water clear.
  • Your pool needs to have a dedicated line for suction cleaners. I have been to many pools where the customer previously purchased a suction cleaner because of the lower price, but did not have a dedicated line in their pool. Instead they plug the cleaner into the pool skimmer line, completely eliminating the skimmer from the pool circulation. Skimmers are important due to the fact that they circulate water efficiently and skim debris off of the pool surface.
  • They require A LOT of suction to work. This means that most customers are cutting off 75% of the suction from the skimmer/s and main drain to make their suction cleaner work well.
  • You should always use a leaf canister to catch debris before it enters the underground plumbing. Without a leaf canister you increase your chances of clogging an underground line. These canisters usually have to be purchased separately, increasing the cost of your cleaner setup.

You May Like: Indoor Pool Tropicana Atlantic City

How Long Will My Robot Pool Cleaner Run For

We often buy products that provide plenty of value for our money. However, most of these items will break down within a short time leaving you at a loss. However, getting a robot pool cleaner offers a higher return for your investment.

You can expect the device to serve you for four or five years. It can even last up to eight years with the right upkeep. Although you can find cheaper models that do not offer the same lifespan but given the proper care, you can still expect them to run for at least three years.

Whats more, you dont need to shell out on expensive annual maintenance. Nonetheless, you still need to maintain it, especially when tackling debris. And when its done and over with, you just need to replace your unit.

Although maintenance is needed for a robotic pool cleaner, especially to clean out the debris, there is no costly annual maintenance. Once it is done with, you simply replace it.

How Does Polaris 280 Work

Best Polaris Robotic Pool Cleaner

The pipework includes a bypass to feed the booster pump. The Polaris pressure cleaner connects to the sweepers socket, which acts as an outlet. The venturi effect created by the jets converts the incoming water into a powerful suction current which allows the the Polaris automatic pool cleaner to move freely.

Don’t Miss: Inground Pools Buffalo Ny Prices

What Are The Drawbacks To Pool Robot Cleaners

As nice as they are to have for saving time and effort, there are a few cons when it comes to pool robots:

  • Price: Pool robots are usually the most expensive type of automatic cleaner. The cheapest ones may be about the same price as a mid-range pressure or side-suction cleaner. However, these models dont have nearly as many features and tend to break down more often.
  • Maintenance: With all the moving parts, theres more to break and replace on a pool robot. In fact, the most common complaints when it comes to robotic cleaners are all about them suffering mechanical malfunctions. Thats why you should probably purchase a machine with a decent warranty, including an extended warranty if its available.
  • Filter cleaning: Unless you want to waste money on disposable filters, youll need to clean out the filter bags or cartridges after every cycle. If your pool is big and gets used a lot, youre going to have to clean them with annoying regularity.
  • Tangled up cables: Because anti-tangle swivels dont always work, its a good idea to watch your unit the first few cleaning cycles to ensure the tangle-free swivel is doing its job.

Limited warranties and specialized internal parts mean repairs can be costly. Therefore, robotic pool cleaners require regular and specific maintenance.

How Do I Keep My Pool Vacuum Hose From Tangling

4.7/5Hosesthetanglestanglesthe hosestheThestoptangles

Then, why does my pool hose keep tangling?

Hose LengthNothing can cause tangles more than a hose that is far too long for your pool. While you want a little bit of play in your hose, too much is overkill. This results in a hose that just floats in the water. This floating hose is free to move and for some reason loves to move around itself causing a tangle.

Likewise, why is my Polaris pool cleaner floating? A Leaky HoseLeaks in the Polaris hose cause the cleaner to lose pressure, allowing it to float above the pool bottom. To check for leaks, turn the system on and pull the hose out of the water one section at a time, looking for bubbles or trickles of water.

Likewise, why is my pool cleaner going in circles?

Sometimes it gets stuck in the corner of the pool by the steps other times it goes in circles. This is most likely caused when pool cleaners are left in the pool 24/7. When the water is cold or cools off from a warm day, the plastic in the hose gets a memory and curls slightly.

How long should pool cleaner hose be?

Sizing the HoseIt should be 6â³ long or short of the farthest point. Measure the excess and remove the entire hose from the pool. The leader hose attaches to the cleaner head.

Recommended Reading: Is Venetian Pool Open

How Robotic Pool Cleaners Work

When you see one of these in action, youll undoubtedly be impressed. Robotic cleaners are smart, durable, little workhorses. They drive around inground pools, sucking debris into a built-in filter canister. Not only will they scrub and vacuum your pool floor, theyll drive up stairs, and climb your pool walls. They also scrub your waterline and tile.

The Debris Your Pool Collects

Polaris Pool Cleaner Review and Troubleshooting

Youll get better results from a pool-cleaning robot if you consider the kind of debris that lands in your pool. This is wholly dependent on your climate, geographical location, and landscape. All these factors contribute to the types of junk that end up floating around in your pool.

For example, if your property has a lot of trees on it, youll probably want a robot that has a large filtration basket. This way, it wont fill up too quickly, saving you the annoyance of having to empty the device every two seconds. If your pool is plagued by finer debris such as pollen or dust, think about buying a robotic pool cleaner with ultra-fine filters.

Also Check: Vdara Access Cabana

Price And Longevity: An Important Comparison

Probably one of the most important factors when it comes to longevity is the price. After all, if youre like most people, the intersection between cost and longevity is how youll see the products value.

Generally, a more expensive product will indeed be of better quality, therefore having better longevity and durability. After all, you cant expect a $100 automatic pool cleaner to last as long as a $1,000 one. But the factors listed above and other slight nuances also affect what is otherwise a properly linear line for the connection between price and longevity.

The other thing to consider is that robotic pool cleaners tend to be the most expensive type of automatic pool cleaner. However, this does not necessarily mean that they have the best longevity. In fact, on average, pressure-side pool cleaners will last longer simply because of the ease of replacing any broken or worn-down parts. Alternatively, the cheapest automatic pool cleaner option the suction-side cleaner also has the lowest life expectancy.

In short, although price and longevity are connected, there are other factors to consider.

How Do You Use A Polaris Pool Cleaner

Being that the Polaris Vac-Sweep 280 Pressure Side Pool Cleaner is our #2 pick for the top pool cleaners, we often get this question. The Polaris Side Pool Cleaner is unique, but not super difficult to use, and quite effective.

The Polaris Pool Cleaner comes with a bag, hose, and wheels attached to a uniquely designed plastic body. The Polaris Pool Cleaner automatically moves along the bottom and sides of the pool to pick up debris, it can also be set to run automatically when the pool turns on, which our team found to be extremely convenient!

Follow the instructions included with the automatic swimming pool cleaner and make sure the Polaris hose is not tangled at all prior to placing it into your swimming pool water to help avoid any hang-ups when it is running.

Recommended Reading: Landscaping Around Pool Equipment

Ability To Climb Walls

Some pool cleaners only clean the bottom of the pool, which means you’ll still spend a lot of time every week brushing your pool walls to make sure you get rid of algae and debris.

If this is important to you, look at the specs on the product and search through the reviews to see how well it does the job.

Why Should I Choose A Robotic Pool Cleaner

Polaris 280 Automatic Pool Cleaner

There are several pros and cons to each type of pool cleaner. Overall, we think robot pool cleaners are the best and these are the main type of pool cleaner we focus on here at Pooltronixs.

The suction-side pool cleaner is often recommended to people who will not need frequent use. These are cheap and easy to install. It takes much longer to finish cleaning due to the random cleaning pattern factor. It will place pressure on the pools pump and filter, and are more costly to run than the robotic type.

The pressure-side cleaner is the least likely to be recommended. Even though it does a better job of cleaning than the suction-side, it requires a specific pressure line, which is expensive to retrofit if it is not already present. It also often requires a boost pump which is an added expense.

The robotic pool cleaner is not as cheap as the suction-side model, but it has several reasons to be considered the better bet. It does a much better job of cleaning than either of the other two models, as it is systematic and able to clean very small debris or dirt. It can clean steps and other awkward positions, and it does not need any installation or external pump or system: it is as easy as plug and play.

Don’t Miss: Make Your Own Inground Pool

Features That Are Nice To Have

Other features that are nice to have but not really necessary are a remote control, programmability, and Bluetooth and Wi-Fi capability. A remote control allows you to navigate your bot to a specific area for precision cleaning.

If you want to run your cleaner on a set schedule while youre not home or at night, being able to program weekly cleaning cycles certainly would be beneficial. However, if you do that, youll have to leave it in the water all the time. This means that the chlorine and other pool chemicals could shorten its useful life.

Polaris Pool Cleaner Categories

The creation of the current Polaris product line is rooted in robotic pool cleaners and pressure side pool cleaners.

The Polaris pool cleaners in the commercial product line were selected because of their impressive design features and current market performance.

All the Polaris pool cleaners are engineered by skilled and experienced technicians in the pool maintenance industry.

They are also tested for quality assurance checks.

Read Also: Painting Concrete Pool Decks

The Best Robotic Pool Cleaners

In recent years, robotic pool cleaners have made it easier than ever to clean pools of various sizes and materials, turning a once-numbing task into something much easier on everyone. Here are my choices for the best cleaners currently on the market, as well as some information on how I made my decisions.

Recommended Reading: Does Having A Pool Increase Home Value

Increases Wear And Tear

How to Replace the Top Part on a Polaris 280 Pool Cleaner

You can swim while your bot cleans the pool, but it’s better not to. Swimming churns up the water. If the machine is in the water at the time, the current will buffet it, making it harder for it to complete its work. It’ll have to work harder to cover the same ground.

If you leave the machine in the water when you add chlorine, the change in pH can affect the plastic. Repeated exposure could cause the plastic to wear faster than it ordinarily would.

You may only need to run the cycle two to three times a week. Leaving the machine in the water during that time exposes it to the elements unnecessarily. This exposure could cause the seals to deteriorate faster, allowing for leaks and damage to the electronic components.

Also Check: Best Ways To Heat Above Ground Pool

How Do You Know When To Change Your Pool Filter

Some other signs include:

  • Your pool filter requires more cleaning or backwashing than normal.
  • Your pool filter most run longer to clean your pool.
  • Your pool filter clogs easily, especially during vacuuming.
  • Your skimmer suction isnt powerful.
  • You are having a hard time maintaining a healthy pH balance.
  • Enjoy Your New Swimming Pool Cleaner

    Having the best pool cleaner can ensure that your pool remains free of dirt and debris that can damage the condition of your water. Just like some salt water swimming pool chlorinators, and other pool maintenance products and equipment, many of them can be set to work on cleaning without you monitoring it, saving you a ton of time over the years!

    If you have any thoughts about the swimming pool cleaners we chose to review, please let us know in the comments!

    You May Like: Can I Leave My Dolphin Pool Cleaner In The Pool

    How Do You Rebuild A Polaris 280

    When your pool cleaner isnât working properly, it may need to be replaced or rebuilt. The latter is the cheaper option and can get your cleaner running like new. Here is how to rebuild a Polaris 280:

    Things youâll need:

    • Magic marker

    Then follow these steps:

    Check this too: Best Wireless Pool Thermometer

    Why Does My Polaris Pool Cleaner Get Stuck

    The Best Polaris Pressure Side Pool Cleaners for 2020

    A Polaris cleaner has water tubes inside that direct pressure throughout the cleaning unit. They can sometimes become disconnected, which reduces the internal pressure, which makes the cleaner stop moving. Open up the cleaner and make sure all the internal tubing is connected the way it’s supposed to be.Mar 5, 2019


    Also Check: Tibbits Pool Yonkers

    Works Well But Requires A Lot Of Maintenance

    Ive had one for 10 years now. When it is working it works very well. Took a bit of fine tuning of hose length to get it doing the entire pool, but once that was done it went well.

    Within warranty period had a number of small items replaced .

    Since warranty periodA few tyresAll the block axles…


    This possibly the worst pool cleaner ever !! this is the second one I brought 1st one last 3 years then the wheel bearing decided to go cost of repairs $500 + because my pool plumbing was designed to use the Polaris thought try the new model 3900 Sports $850+ later I have a cleaner that continually goes to the same corner and just sits there 🙁 I have had it serviced by the local pool company twice without any success. I am completely and utterly frustrated. I rang Polaris last year yep someone was going to inspect still waiting for that visit so my advise based on my experience over 5 years is stay away.

    The 3900 could be such a great cleaner, except that it’s made to fail. The first year it worked great, then the problems started. The nylon bag is not designed for treated water and the bags don’t last. The tyres wore out in a couple of years and the next year the flimsy plastic gearbox wore out. I had one carefree summer with this cleaner that’s it. It’s a spare parts goldmine for the manufacturer.Never again…

    - Advertisment -

    Most Popular

    - Advertisment -