Friday, July 12, 2024
HomeGroundHow Much To Put In An Inground Pool

How Much To Put In An Inground Pool

- Advertisment -

Price Of Inground Saltwater Pools

How Much Does an Inground Pool Cost?

The average price of an inground saltwater pool is $35,000 for the swimming pool and another $1,100 to $2,200 for the salt water generator, bringing the entire cost to around $36,100 to $37,200. Saltwater pools typically dont require any chemicals added, are easier to maintain, and dont have an offensive chlorine smell.

For pool buyers who opt not to use traditional chemicals in their pool, a saltwater pool uses a special system that converts the salt in the water into chlorine, but the levels are much lower than in a chlorine pool, so it is easier on your eyes and skin.

Estimating Long-Term Salt Water Pool Costs

  • Replacing the cell in the generator every 36 years at the cost of $800 .
  • Adding salt to run your saltwater pool An average pool measuring 14 by 28 with a depth of 6.5 feet has a water volume of just under 20,000 gallons, and for that much water, you will need around 11 x 40-pound bags of salt, which should total just under $100.

Building Your Own Pool Costs Vs Pool Builder Prices

DIY pools save you nearly 50% off the project total. Some DIY jobs come in under $1,000. However, only attempt this project if youre a competent and experienced DIYer with some construction background. And in most cases, use an above ground kit designed for the DIYer. One mistake can mean a collapsed wall and thousands of gallons of water destroying your landscape and possibly damaging you and your neighbors homes.

Hire a certified, insured and competent pool installation professional near you to avoid costly mistakes.

What Is The Average Cost Of An Inground Pool

The average inground pool cost between $35,000 and $60,000 for a basic inground concrete pool without any add-ons. With custom features, you could be looking at $80,000 to $200,000 or more. Also, going for a larger-than-average pool with a connected spa can start your pool prices at around $95,000. For a more elaborate pool with a tile surface and an attached spa, the cost for an inground pool would start at about $220,000.

You May Like: Reducing Cyanuric Acid In Pool

What Are The Ongoing Costs For A Fibreglass Pool

On balance, fibreglass pools tend to be a low cost and low effort option. At Compass, we recommend hand-polishing the gelcoat surface above the waterline periodically. Other than that, if you follow the manufacturers guidelines and maintain balanced water and correct chlorine levels you should never need to resurface, repaint or reline your pool.

The gelcoat surface of your fibreglass pool is smooth, preventing growth of algae and bacteria therefore requiring less chemicals. You may even save money on power as well, as your filtration system may work effectively when run over a shorter period of time than would be required for a concrete or vinyl-liner pool.

With a Compass fibreglass ceramic pool, you can also choose to include the Vantage self-cleaning and circulation system which boosts the circulation in your pool and makes it even more difficult for algae and bacteria to grow. This system also eliminates the need for manual or robotic cleaners, saving you significant time on cleaning your pool and money on items such as power, chemicals and cleaning equipment.

Why You Might Want To Renovate Your Inground Swimming Pool

How Much Does An Inground Pool Cost To Install

Why should you renovate your pool?

Well, a pools functionality decreases over time. It goes along with the changes in styles and design.

But the main reason why you might want to renovate your inground pool is the breaking down of its surface.

Not taking action may lead to:

  • Cracks in the surface material such as tile or plaster
  • Appearance of white film along the sides of your pool and
  • Spots of algae sticking to the surface

On average, you will need to resurface your pool every 10 to 15 years.

Still, resurfacing is not the only reason why you need to renovate your pool. Youll need to refurbish your pool for safety and energy efficiency reasons.

Another reason is to update its aesthetics. You might want to upgrade your lights and plumbing or add a water feature.

You May Like: Best Pool On The Strip

Inground Pool Size Shape And Depth

A pool is also a great way to keep fit, since swimming will keep you conditioned while burning off calories. Its no wonder then, that swimming is ranked as the 4th most popular sport in the United States, according to Swim University. Costs vary depending on the type of pool you want. Here is a quick snapshot:

  • A fiberglass pool usually costs the length of the pool time one thousand, plus $10,000. That will make a 25-foot pool around $35,000. After the landscaping, accessories, electrical work and other elements, it may be about $45,000 to $85,000.
  • Concrete pools are the most expensive and could run between $50,000 to $100,000.
  • Vinyl liner pools are about $35,000 to $65,000.

The final pool cost will greatly depend on a range of characteristics you will select in consultation with your pool contractor.

Keep in mind that if you go beyond the standard types of pools commonly found in your neighborhood, there will be added expenses. For example, kidney shapes and other unique shapes can increase the cost of a pool beyond what your initial budget called for.

How Do Salt Water Pools Work

A saltwater pool needs a salt water chlorination system to function correctly. The salt system contains an electrolyzer which generates chlorine from the salt and water as the salt water passes through an electrical current. The process results in fewer chloramines, which softens the water, is good for aching joints, and doesn’t smell like chlorine.

Get free estimates on HomeGuide from trusted inground pool installation companies:

Don’t Miss: 25000 Gallon Pool Heater

Gunite Shotcrete Or Concrete Pool Cost Per Square Foot

The initial price of installing one runs $30,000 and $50,000. Expect to pay an additional $27,000 to $40,000 over a 10-year period. Upkeep includes acid washing and re-plastering. Often the largest, they require more electricity and chemicals to keep them clean and swimmable.

  • Both Gunite and shotcrete are concrete. The only difference is the water ration involved and how it is applied. Both use less water than form-set concrete and are applied using a pressurized spray.
  • Get an acid wash every 3-5 years. Concrete is very durable, but it can also be a haven for mold and algae if not properly maintained. Because this will strip a small layer away, the shell will have to be re-plastered at some point.

How Size And Materials Impact Pool Cost

How Much Do Inground Pools Cost? (Pricing, Budget, etc.)

Per square foot, expect a rate of approximately $50 to $125 . Typically a fiberglass pool will cost between $18,000 and $40,000 to install. Concrete should be in the $29,000 to $60,000 range. If you go with a vinyl pool, expect an installation project cost of $25,000 to $45,000.

Average inground pool prices for each of those materials are as follows for various standard sizes:

  • 10 x 20: concrete $30,000 fiberglass $27,000 vinyl $22,000
  • 10 x 30: concrete $43,000 fiberglass $39,000 vinyl $31,000
  • 12 x 20: concrete $35,000 fiberglass $32,000 vinyl $25,500
  • 12 x 24: concrete $41,000 fiberglass $37,500 vinyl $30,000
  • 12 x 30: concrete $50,500 fiberglass $46,000 vinyl $35,500
  • 14 x 28: concrete $54,500 fiberglass $49,500 vinyl $39,500
  • 15 x 30: concrete $66,500 fiberglass $60,500 vinyl $48,500
  • 16 x 32: concrete $74,500 fiberglass $67,500 vinyl $54,500
  • 18 x 36: concrete $92,000 fiberglass $83,500 vinyl $66,500
  • 20 x 40: concrete $124,000 fiberglass $113,500 vinyl $92,500
  • 25 x 45: concrete $188,000 fiberglass $173,500 vinyl $144,000
  • 30 x 50: concrete $237,000 fiberglass $217,500 vinyl $178,500

It will usually add about $2000 to your project cost to choose a saltwater pool.

You May Like: How To Clean Pool Tile Harbor Freight

How Much Space Do You Need For A Swimming Pool

A well designed swimming pool is a complimentary addition to any outdoor living area. Whilst visually the pool is often the focus the purpose of your pool design should be the seamless use of the whole outdoor space year round. By this I mean ensure you allocate space and position the pool according to how you will utilise the remaining outdoor space.

For instance:

  • Grassed areas if you have kids and animals for play areas and free roaming year round
  • Al fresco entertaining and outdoor rooms will protect you from the sun in summer and keep you warm during the winter
  • Paved areas form platforms for outdoor furniture and thoroughfares for foot traffic
  • Planting and garden beds soften finishes and offer privacy
  • Pools serve a practical purpose for the Summer period and otherwise offer a purely visual function year round.

Even though I build swimming pools, I dont think they are the be all and end all of outdoor design.

Here is an example of what were talking about the pool is not too large to take up the garden, leaving plenty of space for other activities.

  • Kick the footy
  • Build a vegie patch etc.
  • Thrust up a clothes line
  • Build a shed and park a trailer

Your backyard is so much more than a swimming pool its an outdoor entertaining area in which the design should be dictated by how you will use the space.

Key points:

The Cost Of Pool Heating:

The addition of heating to your swimming pool can extend your swimming season. Price factors to take into consideration are your location and size of the pool. If you have the roof space, and the sunshine, then Solar Heating is the most cost-effective form of heating. For those looking for an alternate, the new models of electric heaters are quite efficient.

The cost of running swimming pool heating equipment, whether it be solar, electric or gas, has come down a great deal over the last few years as the technology has improved. Below is a table of very broad running costs for different heating equipment for an average 8m x 4m swimming pool based on the average cost of electricity and gas.

$500 $1,500 $700 $2,100

* This is an estimated cost, please check with your gas/energy company for a quote

Also Check: Best Way To Clean Pool Tile And Grout

Built In Pool Location

Location can affect the price depending on several factors, such as:

  • Southern or Northern State? On average, youll pay 15% to 25% more in the Northern States than places like Arizona, Texas or Florida.
  • Rock or loose dirt?Excavation costs$1,500 to $5,000. Hitting rock can add another $1,200+.
  • Accessibility. Hard to reach areas can add $10,000 or more to the project. If large equipment, like loaders, dump trucks and cement trucks cant access the area, it drastically increases the project time.
  • Travel distance for the building crew to get to your house can add $100 or more.
  • Cost of living index. Expect hourly and project rates to reflect the cost of living in your area.
  • Hiring or renting equipment. If you decide on a fiberglass variety but don’t have access to your backyard, youll need to hire a crane.

Pool Cage Maintainance & Replacement Costs

How Much Does An Inground Pool Cost?

Pool screen repairs cost $200 to $600 for small jobs, and between $1,200 and $3,500 for a complete rescreening. Proper maintenance can increase the longevity of your pool enclosure by a decade or more. Regular maintenance tasks include:

  • Clean the enclosure every six months, or hire a professional to pressure wash annually.
  • Tighten or replace loose bracing cables after a storm.
  • Store all movable objects away from the enclosure if high winds are threatened.
  • Remove any peeling paint and do paint touchups.
  • Check all screens, anchors, bracing cables, door hardware, adjacent wood, and rubber splines regularly.
  • Replace torn screens or glass/plastic panels at the first sign of damage.
  • Replace rusted or weak screws, anchors, fasteners, or bolts.
  • Repair or replace damaged door hardware and lubricate it.
  • Replace rotting fascia or soffits. Consider adding a super gutter to direct the flow of water.
  • Replace loose rubber splines.

Don’t Miss: How To Hide Pool Equipment With Landscaping

Recurring Costs Can Be Managed

After the pool is built, there are recurring costs that you must pay to keep your pool healthy and beautiful. Each year you should expect to spend $2500 to $5000 for additional utility use, maintenance, and any repair needs that arise.

In terms of maintenance, just like installation, your per-year cost will differ based on the material. A concrete pool, which can last for 50 years, should incur maintenance expenses of $2700 or more each year. Vinyl pools, which need liner replacements about every 10 years, will incur $1325 and up for yearly maintenance. Fiberglass pools have a lifespan of 25 years they cost $350 or more each year to maintain.

Whichever material is used, these costs can be managed. By consistently keeping the pool cleaned, updated, and in good shape, you will better retain the value of the pool and reduce any recurring costs in the process. Good luck with your purchasing decision and enjoy your new swimming pool!

Inground Pool With Hot Tub Prices

The average cost of an inground pool and hot tub is $30,000 to $70,000, depending on the size. Adding an in-ground hot tub costs$6,000 to $15,000 more when building simultaneously with a pool, or $8,000 to $25,000 when adding to an existing pool.

Prices depend on the style of hot tub and how integrated it is with the rest of the pool. Pool companies typically offer to include the hot tub with the inground pool in their quote, with discounts for getting both done as one project. Hot tubs vary in price depending on the number of jets, quality of materials, and the number of people the hot tub can accommodate.

  • Entry Level $2,000 to $4,000
  • Medium Quality $5,000 to $8,000
  • High End $9,000 to $12,000
  • Premium $13,000 to $20,000

Also Check: How To Heat Above Ground Pool

Average Costs Of Building A Swimming Pool

Labor costs vary, depending primarily on the pool type. In-ground pools have higher labor costs than above-ground pools, while concrete and fiberglass have higher labor costs than vinyl. Labor costs are also impacted if blasting is needed with the excavation and whether the deck is installed at the same time.

On average, labor costs to build a pool range from $5,000 to $30,000 but can go higher for custom pools with specialty designs. The pool material cost ranges from $4,000 for a vinyl , $10,000 for a basic fiberglass shell, up to $27,000 for a premium shell, and between $55 and $70 a square foot for a concrete pool.

Not every project requires all levels of work. For example, not every installation requires blasting, and the finish work can range, depending on the pool material, with fiberglass requiring the least and concrete requiring the most.

$5,000 – $30,000

Then Check How Much Each Feature Costs

How to Install an Inground swimming pool liner DIY Replacing a vinyl liner

You should ask yourself some questions before buying a swimming pool. Here are a few numbers to help you determine the price of putting an inground pool in your backyard.

How much does a semi-inground pool cost?

  • A semi-inground pool costs $10,000 or more.
  • It’s a good compromise between an above-ground and inground pool.
  • It requires more maintenance than an above-ground pool, especially if the skirting is made of wood.
  • It doesn’t increase the value of your house.

How much does an inground pool cost?

  • This is the most expensive option, but also the most appealing.
  • You should expect to pay between $25,000 and $45,000, including basic installation fees.
  • This is the only type of pool that adds value to the price of your house at resale.
  • The price of an inground pool varies based on the coating selected.

How much does a natural pool cost?

  • This option is eco-friendly, since it doesn’t use chlorine or chemical products.
  • It costs between $100 and $150 per square foot, for a total of about $20,000.
  • However, you have to be comfortable swimming in a pool that has plants.
  • It has low maintenance costs.

How much does installing a pool cost?

Saltwater or chlorine pool?

How much does a swimming pool cost per year?

Here are the annual fees to add to your budget:

How much does heating a pool cost?

Recommended Reading: Fastest Way To Heat Above Ground Pool

Cost To Build A Shipping Container Pool

The cost of a shipping container pool starts at around $17,000. This does not include the water or deck you may want to include. Shipping containers can come in many sizes and have a modern sleek style, which many find attractive. They can be sunk into the ground or used as an above-ground pool with proper ladders. Depending on the shipping containers age and type, you may need to line the container to safely hold water long term. Things like chlorine or saltwater may harm the container if not lined.

Price Depends On Location And Time Of Year

The location of your home also impacts how much it costs to build your pool because materials are more expensive in some states. Similarly, if you live in an area with very few pool builders, youll have to pay more than you would in an area with a builder on every block.

Another significant factor is when you choose to build your pool. Since most people start dreaming of a pool as the weather gets warmer, spring can be a popular time to start building. Due to higher demand, the prices go up. Instead, consider building your pool in slower times, like fall and winter. You might get a better price and, as a bonus, your pool will be ready by the time summer starts.

Also Check: Vdara Indoor Pool

X20 Inground Pool Cost

This is considered a small pool, but its sufficient if youre working within a small space, or if you primarily intend to use it for lounging or cooling off. The cost of a 10-foot by 20-foot inground pool will be between $18,000 and $26,500, depending on the type of material used. Materials and their average associated costs are as follows:

  • Concrete, $26,500
  • Vinyl, $18,000

- Advertisment -

Most Popular

- Advertisment -