Reasons To Drain An Above Ground Pool
Some of the reasons you might have to drain your pool include:
- 1To replace the pool liner. This is usually due to a tear or leak. There is no getting around draining the pool in this situation!.
- 2To start the season fresh with new water. If you close your pool properly, you shouldnt need to do this, but hey, stuff happens and sometimes, despite our best intentions, we dont get it done…or it doesnt get done properly.
- 3To remove the pool from your yard or replace it. ‘Nuff said.
- 4To fix your pool chemistry due to chlorine lock. Chlorine lock is one of those water conditions that chemicals just cant fix. In fact, the more chemicals you add, the worse it gets. It’s caused when there is too much pool stabilizer in the pool or when the pH levels are unbalanced. It basically renders the chlorine useless and the only way to fix it is to get rid of some of the over-treated water and replace it with fresh water.
Should I Shock My Pool After It Rains
It is certainly not necessary to shock your pool after every time you have some rain. If that was the case then in some areas you would be shocking the pool many times a day.
Generally it would only be necessary to shock the pool of you have had a significant amount of rain, particularly if it necessitated draining the excess water away.
Once you have shocked the pool and given it time to settle you should test the water and make any adjustments necessary.
How Often Do You Need To Drain A Swimming Pool
Draining a pool often is something you want to avoid, if possible. Because keeping your swimming pool in good working order can be quite a task. Draining and refilling the water is a big part of maintenance. Its essential to maintain the water chemistry and ensuring that its clean and safe for whoever uses it next. Besides, it is vital to keep the shape of your swimming pool intact when draining and refilling otherwise, you risk weakening the pools structure and affecting its appearance. But dont worry with the right tools, your pool-draining experience can be a breeze.
Also, theres a point where your pool becomes more of a hazard than anything else. If you get a reading of 1,500 parts per million of total dissolved solids, or 350 parts per million of calcium hardness occurring, the times come to drain the pool and start over.
You will need to drain your pool if you notice any of these symptoms:
- Excess algae growth or cloudiness.
- Foul smells or green color in the water.
- Pool plaster thats beginning to crack and crumble.
- A TDS reading thats higher than expected.
- The most common cause of pool water restoration is over-chlorination.
- A pool that has been sitting for a long.
- A pool that is affected by the weather.
Also Check: Mandalay Bay Pool Cost For Non Guests
Using A Submersible Pump
Using a submersible pump hooked up to a hose is the next quickest way to drain the water from your pool should you need to lower the water level after rain
Just connect your hose pipe to the pump, drop the pump into the pool and switch on the power to the pump.
You can direct the other end of the hose to a convenient area of your yard or into a drain.
TIP: If you have a vinyl liner then make sure that you lower the pump to the bottom gently as if the pump has a sharp edge it could damage the liner.
You can buy a very effective submersible pump quite cheaply. The Wayne VIP50 is a very robust, non-clogging pump that will pump 1800 gallons per hour.
Many utility pumps have a floating switch that cuts the motor when the level drops to prevent the pump from running dry and burning out. You wont need this feature when using a pump to lower the level of the pool after rain but it may be useful if you ever want to use it to empty your pool. Once you have one you may find other uses for it too where this feature might be useful. Wayne also make a Wayne 57729-WYN1 higher flow pump with an automatic cut-out when the level drops.
Know Where Youre Going To Drain
Before you start draining your pool, you absolutely need to have a game plan. Remember, this is thousands of gallons of water youre about to moveand its got to go somewhere. Plus, your yard is not an option, and not just because you dont want chemically-treated water going into your grass. Pool pop ups happen most frequently when there is pressure underground around your pool. Introduce water to the ground near your pool and youre probably going to regret it.
So where should all that water go? Again, this is a time when you should consult with your local water authority. The usual process is to direct the water into one of your homes sewer cleanouts, but some cities allow you to drain into the streetand others have tight restrictions on when you can drain your pool. Go to your local dot gov to find out the regulations that apply for you.
To take extra measures to avoid the pool pop up, make sure your drainage hose is long enough to reach the sewer cleanout . And just in case any other drainage problems occur, direct the drainage hose downhill from the pool. You never quite know if your sewer cleanout is significantly clogged until youre trying to push thousands of gallons of water through. If something goes wrong and that water happens to come back toward you, you want to make sure its nowhere near your pool.
Also Check: Can Vdara Use Aria Pool
Things To Keep In Mind When Draining Your Pool
Before you get started: there is one important tip we can give: make sure you have a game plan.
You are going to be releasing thousands of gallons of water, and its got to go somewhere. Just letting it flow into your yard is usually not an option, unless you have a really small pool or an above-ground pool. But for an in-ground pool, your water will need to be drained as far away from your pool as possible.
Also, you need to consider the chemicals already in your water. Its a good idea to avoid putting additional chemicals in your water a few weeks before draining your pool.
So where should all that water go? This usually depends on your local regulations. Some authorities might require the water to be directed into your homes sewer cleanouts, or they may just allow you to drain it on the street. However, always make sure to check this before you start planning the drain.
To take extra measures to avoid the pool pop-up, make sure your drainage hose is long enough to reach the place where you want to redirect the water to. Its also a good idea to make sure the hose is directed downhill from the pool. You wouldnt want the water to be flowing back to your pool in case something happens.
Lastly, if it has been raining a lot, you better wait until the ground has dried up. The ground beneath your pool is already saturated with water due to the heavy rain, and it may make your pool pop out as the water empties.
Dont Drain In The Rain
A period of heavy rainfall is the absolute worst time to drain your pool. The ground will be heavy with water, which increases the risk of it pushing the pool up and out as you empty it.
Wait for dry weather. And not just a day or two of it. Give the ground time to dry out after its absorbed a lot of rain. Remember, just because the ground looks dry on the surface doesnt mean its not still saturated several feet down around the sides and bottom of your pool.
Recommended Reading: How To Heat Above Ground Pool Fast
Draining Your Pool Water
Now youre ready to simply drain the remainder of your pool water. You can drain the pool quite quickly following the steps above. If youre using the severed hose siphon, remove your hand once youve let the unsubmerged end of your garden hoses fall to the ground. The immersion should be enough to generate movement in the water. There are various guidelines online for how to use garden hoses and other equipment to remove all the water from your pool without wrecking your yard. Waiting until the weather is right is crucial to reduce the risk here.
Although the siphoning method should drain the pool very quickly, some people will find that this only works to a certain level. If you have a bigger pool, then you may need to use another method to take some of the remaining water out of the bottom of the pool when the siphoning stops.
Follow the steps above to use the siphoning method when the conditions are right, then around the time when the water begins to slow, you can think about using a pump instead. This is often a good idea if youre removing all the water in the pool because its time for you to remove excess chemicals or time to replace your pool.
Of course, if theres damage to your pool or pool pump, this could be causing quite a mess already.
Lihat postingan ini di Instagram
How To Drain An In
Draining an in-ground pool is much more involved than draining an above-ground one.
Your in-ground pool may have two or three hydrostatic plugs. Removing all of them is best, but make the one in the deep end the priority. It will release that upward pressure the quickest, and you wont have to fight running groundwater from the other plugs. Using this method, you should be able to avoid pool pop. Just be sure to replace the hydrostatic plugs before refilling.
Don’t Miss: How To Remove Algae Stains From Pool
Commercial Fats Oils And Grease
Restaurants play a major role in helping keep Scottsdales sewer system working properly. Reducing the amount of food waste that is put into the citys sewer helps reduce odors, avoid clogs or blockages and prevent costly repairs. Grease traps and interceptors are the best options to help keep the sewer system operating properly.
Grease traps are small devices located inside the kitchen, directly plumbed to the 3-compartment sink. They help trap food debris and grease that can mistakenly be washed into the sewer
How To Drain A Pool Of Any Kind
Every time you jump into your pool, its a sensation of being immersed in cool, clean water. But how clean is the water, really? Sure, you use sanitizer the way youre supposed to and you clean the pool. But if its been a few years since your pool was filled, it may be time to drain it and start fresh.
And no matter how well you take care of your pool, there will come a time when it needs repairs, from minor touch-ups on a vinyl liner to plastering cracks in the cement. And its pretty hard to fix those spots on the floor of the deep end without removing the water first. So take a little time to learn how to drain a pool so youre ready for anything.
Don’t Miss: Is Jones Beach Pool Open
Allow Pool Chemicals To Dissipate
Regardless of where youre going to dispose of the pool water, its bestand in most cities, requiredto ensure the water does not have high levels of pool chemicals. It should be chlorine neutral, have a neutral pH, and not contain any additional chemicals you may use. Contact your local water authority for required chemical levels where you live.
To reduce levels, stop adding chemicals, and test the water until the water reaches the necessary chemical levels. If you need to drain the pool sooner , you can use a chlorine neutralizer to speed up the process.
How To Keep An Inground Pool From Popping
If you live in an area that has a high water table, and you completely drain your inground pool, its possible the pool will pop. This means, without the weight of the water pressing on it, the pool may be pushed up and out of the groundliterally. The risk is even higher if you drain your pool after several days of heavy rain.
An inground pool can pop regardless of type. Concrete, gunite, vinyl, fiberglasstheyre all at risk of popping when drained.
If its time to drain your pool, and you want to keep it from popping, consider draining just half the water from the pool, and refilling it. The ability to do this will, of course, depend on your reason for draining it in the first place.
For example, if you need to repair the floor, youll have to completely drain the pool. If this is the case, you may want to consult a professional to avoid expensive damage to your pool.
If you decide to move forward yourself, take a few extra precautions to help prevent popping.
Read Also: Do It Yourself Fiberglass Pools
Draining Pool Water Using Garden Hose Siphon
A slower way to remove water from your pool is by using a garden hose siphon. You can use just one garden hose, but if you want to drain water faster, use more. Follow the instructions below.
Start Draining The Water
To start draining the water with a hose:
To start draining with an electric pump:
Well, since all pumps have their operational manual theres no need to cover the specific steps here. Its simply a case of following the instructions that come with the device and youre good to go.
Again, this can be used in combination with a garden hose drain, or right from the start if youre in a hurry to get things done and money isnt an issue.
You May Like: Where To Buy Sustain Pool Chemicals
Get To Know Your Relief Valves
Get ready for some jargon, but I promise it wont last: the hydrostatic pressure relief valves of your pool are essential to preventing a pop upand if this is your first time draining, you might not even be aware that you have them.
If you look at your pools floor, youll see one or more white rings plastered in place. Under that plaster, theyre threaded into a slotted pipe. That pipe runs along the floor of the pool and ends in an underground gravel pit that was put in place when the pool was originally built. These valves allow water thats accumulated underground to come up into the pool when its drained. Without them, that inevitable underground water would create enough pressure to make your pool pop.
Youll remove these rings once the pool is mostly drained to alleviate the pressure, but might want to have a few extra on hand just in case they get damaged during removal. When it comes to draining your pool, its always best to be prepared.
How To Drain The Summer Waves Pool Using Your Filter System
To drain the water with a filter system, you need to follow the below steps.
- Draining a pool takes a lot of time. The equipment you need to have close to your hand is- a pool filter, a backwash hose, and a backwash hose clamp.
- Clamp the backwash hose to your pool filter.
- Place the backwash hose toward your sewer drain to drain your pool water.
- Turn off your filter by unplugging it from the wall outlet. Set the filter to the backwash setting. Now, plug the filter into the electric outlet.
- Backwash your filter for a minute and turn off the filter again.
- Next, set your filter to the waste setting. Then, turn the skimmer off and open the main drain.
- Turn on your pool filter to drain the water. After a few seconds, water will begin to pump through the hose.
- So, monitor the water level and every piece of equipment in your pool.
- Finally, shut the pool filter off when the water emptying workflow is finished.
You May Like: How Much Bleach For 10000 Gallon Pool