Balance The Water Of Your Pool
Upon validating that you do have a mustard algae outbreak, the next thing you want to do is to balance the pool water. Here are a couple of ways to do it:
- Check the filter system of your pool and clean it. Then, ensure that the pool water has the right pH level with the help of a pool test kit. You may consider refilling your swimming pool with fresh, new water.
- Use an automatic pool cleaner to suck up every bit of debris on your pool walls and floors. Robotic pool cleaners are highly recommended since they can climb steps and walls with ease. Hence, they eliminate the need for you to manually brush these areas to get rid of algae. Afterwards, check and ensure you have the correct pH levels.
The alkalinity of your pool water should be between 120 to 150 parts per million. On the other hand, the pH levels should be around 7.4 to 7.6. Keep in mind that algae enjoy pool water with a higher pH level so make sure to keep everything balanced.
How To Kill Pool Algae
If your pool begins doing its best imitation of a chameleon, the first thing to do is make sure the pool is off-limits to any would-be cannonballers. Then, you should identify the type of algae that is taking up residence in your pool the appropriate treatment may vary, depending on which youre dealing with.
How To Get Rid Of Algae From Your Pool
Despite your best efforts to prevent algae, those tricky little spores getaway in and start to grow. Sometimes you do not have enough time to maintain your swimming pool the way you meant to, or maybe your filter gets blocked without you any notice.
Even though you have a problem and you just need to know how to fix it. Removing algae is not such a tough job as rocket science, but requires a bit of biology. You have to take some time and a slight hard work with the proper steps and equipment youll definitely be an algae-killing expert in no time.
It anyone follows these steps you will be able to remove all the algae growth from your pool.
Test the balance of water chemistry
The first step is to test the water chemistry and is one of the most important steps to getting the idea about pool water and keeping your pool algae-free. Take a good test kit to test your chlorine and pH levels. Try to keep your pH level to about 7.8 by adding sodium carbonate. And use sodium bisulfate that will also need to make sure the chlorine is at least above one ppm.
Turn on the pump
Frequently, you run your pump eight hours a day while you remove algae, your pump will need to be running 24 hours a day. It prevents the water from declining and helping the algae to grow again.
Remove debris
Brush your pool
Vacuum your pool
It is better to vacuum your pool once a week. If you notice any debris, dirt, leaves, and dead algae in your swimming pool, vacuum your pool at any time.
Shock your pool
Recommended Reading: How To Take Calcium Off Pool Tile
Cleaning Backsplash Wall And Floor Tiles
For non-pool tile that is glazed , use a sponge and dampen it with a non-oil-based household cleaner. Vacuum glazed floor tiles regularly to remove dirt and other gritty particles, then damp mop or sponge with an all-purpose, non-oil-based cleaner. If you are using soft water, use a non-oil-based, all-purpose cleaner. Let stand for five minutes then lightly scrub with a sponge and rinse thoroughly.
For unglazed wall and floor tiles, use a damp sponge or cloth with a solution of water and a brand of soap without detergent. Do not use an all-purpose cleaner. And do not use ammonia, which will discolor cement-based grout.
A Word About Pool Tile Grout
Our new epoxy-based pool tile grout requires little upkeep. Its also water repellent and resistant to stains, chemicals and UV. However, the older style cement-based pool tile grout is another story. Cracking and staining are an inevitable part of its lifecycle. With cement-based grout, joints should be treated with a silicone sealer. It is recommended that you apply a sealer at least once every six months for maximum stain protection.
If you have questions, talk to one of our experts. You can call us at 971-1442 or fill out our contact form. You can visit our website at .
You May Like: Wasps Invading Pool
Brush The Sides And Bottom Of The Pool
You then brush the sides and floor of the swimming pool to loosen up the algae and other types of debris stuck on the walls and the floor. The type of brush you use will depend on the material used to make the floor and sides of the pool. Hard materials such as plaster or concrete will need a tough stiff or wire brush while softer materials such as vinyl will need softer brushes.
When brushing the inside of the pool, brush all parts including the ladders, walls, corners, steps, the floor and any other parts covered by the water. You may also need to brush the parts next to the pool to prevent debris from getting inside it.
You May Like: How To Hide Pool Equipment
Is It Worth To Remove The Algae Yourself
Cleaning your pool screen can be a bit of a challenge You must handle the surface with care. Sometimes doing it yourself is not worth the hustle, as its hard to even get to some places you want to clean.
Besides, pool screens can sustain damage if you clean them the wrong way. If youre in a hurry, maybe cleaning a pool screen is not the right task for you.
The amount youre going to spend on products, safety equipment, and others ends up stacking up. So, it becomes cheaper to hire a company to do the job.
At 2H Rescreening have more than 17 years of pool screen installation and cleaning experience We know exactly how to do it, providing a complete level of satisfaction and affordable prices.
Nothing motivates us more than our desire to do every job right the first time.
For a free estimate, please make sure you leave us a message or give us a call, and well get back to you as soon as we can.
What Are The Different Types Of Pool Algae
Knowing what type of pool algae you have will help you treat it. First, figure out what color algae is in your pool. Then, keep reading for a complete step-by-step walkthrough on how to get rid of algae.
- Green pool algae is the most common and easiest algae to kill. However, this floating-green algae spreads quickly, clouding up your pool water and causing green slime on pool surfaces. Getting rid of green algae involves vacuuming and brushing your pool, then shocking and filtering your water.
- Yellow pool algae, also called brown or mustard algae, is a rarer form of algae found in humid climates. It looks like globs of pollen or sand that cling to the shady corners of your pool. And unfortunately, it is chlorine-resistant. Killing mustard algae involves multiple rounds of brushing your pool surfaces and adding extra shock to your pool water. If you’re wondering if you have yellow algae, check out our guide on how to get rid of mustard algae in a pool.
- Black pool algae is actually a bacteria. Its roots dig into concrete surfaces, making it extremely tough to kill. Getting rid of black algae requires several rounds of deep cleaning, and it will grow back quickly if you aren’t thorough. If you’re wondering if you have black algae, check out our complete guide on how to diagnose and kill black algae in your pool.
What is pink algae?
Also Check: How To Increase Stabilizer In Pool
Category Four Yellow Algae
Mustard algae likes to stick to your pool walls in shaded areas. Its difficult to get rid of once it takes hold, and it forms in sheets. You could spend weeks trying to get rid of it because its so easy to re-contaminate your pool. Small pockets can cling to pool toys, cleaning equipment, or inside the pool filter, and it is resistant to chlorine.
After Shocking Your Pool Should Be Cloudy Blue
After the shocking process, you would see a cloudy blue pool in the next morning. This is the exact result we want. The dead algae usually lead to the cloudy water, which turns to a light grey when its killed. Then, your filter would do the rest.
Keep your filter running 24 hours a day during the process until the pool is totally clear. You can consider your filter as a best robotic pool cleaner since you only need to use it to know whether any debris stays in your pool without using other machines. Its also safe to swim in your pool if it is cloudy. The movement in the water will help the filter clear the dead algae way.
Don’t Miss: Easy Ways To Heat Above Ground Pool
How To Keep Dead Algae Out Of Your Swimming Pool
- |February 24, 2021
Proper maintenance is essential to keeping your pool spotless, but the presence of algae can be a stubborn, uninvited guest thats hard to get rid of.
With the tips in this article, youll be able to fully remove dead algae in your pool, and keep it away for good.
Skip to:
Why & How Does Algae Grow In My Pool
Algae spores are constantly making their way into your pool either through environmental elements like wind and rain, through swimsuits, or objects that were recently in the ocean and through people dragging them in.
Once the spores reach the water, ideal environments then cause them to bloom and reproduce.
Several factors, some unavoidable, contribute to the overgrowth of algae:
- Low chlorine levels
Read Also: Should I Convert My Chlorine Pool To Saltwater
How To Use Flocculant To Remove Pool Algae
If you catch algae in your pool early on, you could use flocculant to save yourself some elbow grease. This additive bonds to floating algae particles, making it easier to vacuum them out of your pool.
If you have anything more serious than a mild green algae problem, we recommend you follow the full cleaning plan. For getting rid of a little green algae quickly, go ahead and get it the floc outta there.
Go From Green To Clean
One of the most prevalent problems that pool owners deal with is algae. This is especially true in warm, humid states like Florida and throughout the South. How does algae get in a swimming pool in the first place? Wind, rain, contaminated swimsuits or even pool cleaning tools can bring algae spores into pools. The presence of nitrates can also help contribute to algae blooms. Combine this with a lack of good circulation, filtration or sanitation and you have a recipe for algae. Algae multiplies rapidly on warm, sunny days in above or inground pools. When conditions are right, an algae bloom can occur in a matter of hours.
Whats the best way to get rid of green algae?
Suncoast All In One Algaecide is the best way to get rid of algae in your pool. It kills and prevents every type of algae, including black, green and yellow mustard algae, as well as pink bacteria. In addition, it has clarifying properties to help keep your pool clear.
This free-floating algae variety, which imparts a cloudy green color to the water, is easy to correct if treated early. Getting rid of it requires only 2 chemicals. Just follow the instructions below and you will be back to blue in no time!
1: Adjust pool water pH to normal range of 7.4-7.6 and the alkalinity to 80-120ppm. Your neighborhood Pinch A Penny offers free water tests to help you with this step.
3: Brush the pool walls and let the filter run continuously until it eliminates the algae.
6: Repeat step 2 after 48 hours.
Recommended Reading: Can Lice Live In Chlorine Pools
How Do You Know If You Have Enough Chlorine In Your Pool
You will know you used enough chlorine if within a short time the green starts to lighten in color. Brush the Pool: You need to brush the entire pool. Brush all the algae off the walls and floor, and get it mixed into the chlorine. Wait: Yes wait with the pump off. you want all the algae to die and fall to the floor.
Which Method Is Best
We would choose Method #1: Getting Rid Of Pool Algae By Shocking every day of the week. By using this method, you’re keeping it simple by focusing on chlorine and acid, while using your filtration system to bring it back to life. It tends to be a bit of a work-in-progress and can take 1, 2 or even 3 weeks, depending on the state of your pool, but it’s definitely the easiest.
We also personally like to recommend keeping an algaecide on-hand year round for monthly dosage. If your pool is clear and balanced, an algaecide will do its part in keeping any green, black or mustard algae bay during a chlorine or pH fluctuation.
Do you have any questions about this topic or the featured products? No worries, we’re here to help! Head over to our Contact Us page and drop our friendly team of pool pro’s a line.
Happy swimming 🙂
Please note: This blog is a rough indication of advice for an average sized pool and average dosing recommendations. Mr Pool Man always recommends getting your water tested by a pool professional before adding any type of chemicals for your own safety, or giving us a call on 1300 511 901 or contacting us if you are unsure. Mr Pool Man does not take any responsibility for incorrect dosages or harm caused by adding chemicals. Please practice common sense to add chemicals safely to your pool.
Do you have any questions about this topic or the featured products? No worries, we’re here to help! Drop us a question down below and we’ll get back to you ASAP.
Don’t Miss: How To Lower Cya In Pool
Last And Most Accessible Solution
While you are on the swimming pool, carry a towel or microfiber brush with you and scrub that pools wall area. You can do it a minimum twice a week. Regular base cleaning provides a fruitful result to remove all kinds of stain from the pool. Removing algae stain, you should figure out the stain category of your pool. And by maintaining all the above steps, you can solve the algae stain problems accurately.
Read Also: Vacuum For Intex Pools
How To Prevent Algae From Growing
The key are always controlling your pool properly balanced and sanitized to keep the algae from growing or returning. Make sure you follow these tips:
- Keep the levels of pH, alkalinity and sanitizer in the correct rate at all times by periodic check.
- Run your pump and filter about 8 to 12 hours a day.
- Keep your pool clean and safe from the algae by regularly vacuuming and brushing.
- Shock your pool every week. Remember 1 pound per 10,000 gallons or less.
- Keep your other pool equipment clean including pool toys, diving boards, slides, floats, ladders, steps, diving boards, slides, solar blankets and covers.
Also Check: Does The Fire Department Fill Swimming Pools
Get Algae Out Of Pool Without A Vacuum
If you dont have a vacuum for your pool, dont worry. It takes a little extra effort, but removing algae from pool bottom without a vacuum is possible.
If your pool has a filtration system, the filter should be able to take care of a swimming pool with algae after scrubbing it off the sides and bottom of the pool.
After scrubbing with your pool brush, agitate the water with your hands or a garden hose with a pressure attachment to lift algae on bottom of pool, so it gets picked up by the filter.
Large clumps of algae may clog your pool filter, so it might be necessary to rinse it part-way through cleaning up your algae bloom.
If your pool doesnt have a filtration system, use a pool brush or regular broom to gather the sediment and dead algae on bottom of pool to one corner.
Its critical to move slowly so the debris doesnt spread too far in the water. Once youve made a pile in a corner, use a skimmer, net, or dustpan to collect the algae and sediment and gently lift it out of the pool.
If you discover your pool has gone from crystal clear to murky and green, dont panic. While prevention is the best cure for an algae problem, eliminating an algae bloom is usually straightforward.
In addition to your regular pool cleaner products, youll need pool shock, flocculant or clarifier, an abrasive brush that wont damage your pools surface, and a pool vacuum or skimmer. With a bit of effort, youll have your swimming pool looking like new in no time.
