Above Ground Pool Kit Price
The actual pool will cost approximately $1,700 for an all metal 18 pool and go up to $7,500 for an all resin 33 pool. You will find the all metal pools to be the most inexpensive option, while the all resin pool will be the most expensive pool kit. If there is a hybrid pool option, it will be priced somewhere in between a metal and resin pool kit.
BONUS: If you have ever wanted to see an above ground pool kit be manufactured, here is a great video that gives a high level overview of the process. Note that installation in Oklahoma has a few differences than what is shown on the video.
What Do I Put Under My Intex Pool
Intex pools can be great during the summer months. After all, who doesnt enjoy spending time with the family in the backyard, enjoying the sun, and having fun? If you are thinking of purchasing an Intex pool or have already gotten one, there is one question: what to put under your Intex pool.
You can put a tarp, foam tiles, carpet padding, floor underlayment, carpet, or an Intex ground cloth under your Intex pool. Do not put your Intex pool on sand as it can lead to an unlevel surface and issue. Popular locations to put an Intex pool are concrete, grass, a deck, or a patio. But always make sure to use underlayment to protect your Intex pool from rips, tears, and other wear.
What To Put Under Above Ground Pool On Grass: A Sand Bed
You can use sand to stabilize the ground or grass, smoothing out uneven parts of the surface. There is a critical thing that you will need to follow to ensure that it turns out as intended. Thats, you will need to place a lot of sand on the grass or surface.
Without a doubt, there is a risk of getting sand all over the grass, but dont fret it will come in handy to mask the nasty smell from those offering of your neighbors cat.
Then, sprinkle water on top of the sand bed while rolling or tamping. Finally, place your groundsheet on top of the bed to prevent the growth of grass. Roll out this sheet to fit your above ground pool.
After that, you can position or inflate the pool itself.
Don’t Miss: Inground Pool Syracuse Ny
Blue Wave Above Ground Pool Liner Pad
- Above ground pool liner pad only Blue vinyl
- Protects your liner from sharp objects
- Provides a layer of cushioning
The Blue Wave Above Ground Pool Liner Pad makes old foam floor padding obsolete. Unlike foam, which can be easily cut by grass, roots or rocks under your liner, this liner pad protects your liner from sharp objects and also adds a small layer of cushioning. Liner Pad is cut to size and seamed for your pool. No more cutting and taping as with foam. It comes in 9 different sizes to fit your pool.
- Cut to size and seamed for your pool
- Well constructed and true to size
- Excellent for blocking grass growth and debris
- Above ground pool liner pad only Blue vinyl liner sold separately
- Very thin material, more for blocking grass than cushioning
Consider Putting Your Intex Pool On A Patio
Those with a concrete patio should consider placing the Intex pool there. So long as the surface is level, it is a great place to keep the pool. It also reduces the chances of any twigs, sticks, or rocks that may be lying underneath.
Should you go with the patio as your location, foam tiles are the recommended solution. The patio can be quite hard and the foam padding will provide a softer insulation from the ground below.
You May Like: Mandalay Bay Beach Gazebo
Pool Floor Pad + Nutgrass Killer = Ultimate Liner Protection
Its important to add that many people are under the impression that pool floor pads stop nutgrass from growing through your liner, this is not true. If fact non of the commonly used material like plastic sheeting, plywood, weed barrier, roofing paper, Styro-foam, Perfect Bottom or Gorilla Pad will even slow nutgrass down from doing its damage. If you have nutgrass in your yard you need to address it before installing the liner pad and pool liner. If youre unsure if you have it, buy nutgrass killer anyway, its not that expensive and if you dont use it you could end up with grass growing up through your brand new liner. Trust me, you dont want to be that guy or gal.
To effectively stop nutgrass you must use a high quality nutgrass killer. This is a cheap investment and likely the best one youll make this swim season. I must also say Ive never installed an above ground pool or pool liner in Florida without using nutgrass killer, never. Use the commercial grade stuff if you can swing it , use the garden store stuff if you cant, but always use something!
Features To Look For In The Best Above Ground Pool Pad
Padding. Make sure the liner you buy is padded for added cushioning. Depending on what your pool is sitting on, the ground underneath can be pretty uncomfortable on your feet.
Ease-of-installation. The pool pads of old required a lot of measuring, cutting, and taping. It was a pain! But newer pool pads are cut pretty well to spec and you can find one for almost any size pool.
Materials. Of course, you need to know what materials the pad is made out of and how well it will hold up. For one thing, its best to look for a mold and mildew-resistant pad. This means its not permeable and wont let moisture in. For another thing, the most durable fabrics mean the most protection for your liner.
Read Also: Vdara Hotel Pool
Is It Ok To Put Above Ground Pool On Concrete
Many wonder if above ground pools are only used over grass, sand, or soil, and if installing it over concrete is not possible because of the risk of it getting punctured. If a concrete slab is not available, you can install your above ground pool on concrete. Above Ground Pool Installation: How to Install a Pool in a Concrete Slab Step 1: Determine the size of your pool.
If you are installing a pool in an existing concrete pool, then you will need to determine the width of the pool and the depth. The width is the distance from the bottom to the top. For example, if you have a 4 x 8 pool that has a depth of 4, then your width would be 4. The depth is how deep you want to go.
In this case, we are going to be installing our pool over a 1/2 thick slab of concrete, so our depth will be 1.5. So, our width and depth are 4 and 8, respectively. Cut the slab to size. You can use a utility knife to cut the slabs, but I prefer to do it with a circular saw. This will make it easier for me to keep track of where I am cutting.
Once Metal Begins To Corrode It Doesnt Stop
I dont want to be too scientific here, but I will mention that most things are in a state of either building up or breaking down. This is the main dynamic of everything at least on earth.
When it comes to steel and aluminum the rate that they can break down can be greatly increased if there is constant moisture present.
Better quality above ground pool walls are coated to help prevent the beginning of corrosion caused by moisture. This coating can only protect for so long. If the wall is exposed to moisture long enough, then it can penetrate the coating and the metal wall will start corroding.
Its important to note here that once corrosion begins, it doesnt stop. You can slow the rate of corrosion down by keeping the metal dry, but it will still be at an elevated rate of breaking down through oxidation.
This is why its important to not allow an above ground pool to begin corroding in the first place.
You May Like: Building An Inground Pool
Installing A Pool With A Sand Base And Sand Cove
Using fine sand , lay a 3 thick bed of sand across the entire inside of the pool this will form your base.
Build a sand cove against the pool wall by creating a 4 angle of sand sand base giving you a total sand cove height of 7 inches where the base meets the metal pool wall.
This is the completed above ground pool liner installation. The vinyl pool liner should be completely supported by the pool base to avoid any stress or damage to it or the metal pool wall.
Can I Use Carpet Padding Under Pool
Traditional felt carpet padding is usually frowned upon as a pool padding material, but modern closed-cell foam carpet pads can work well. There are pads that are marketed as memory foam that can be used in pool and spa pools. The foam is made from polyurethane foam, which is a synthetic material that is more durable than traditional polyester foam.
Its also more absorbent than other types of foam that are used in pools and spas, such as polypropylene and polyethylene. The foam can be used to cushion the bottom of the pool or spa, and it can also be placed on the floor of a bathtub or shower to provide additional cushioning.
Read Also: Bioactive Cya Reducer
Foam Rolls Designed To Be Used As Pool Pads For Pool Walls
These rolls of 1/8-inch thick closed-cell foam are intended to be used on the side walls of above ground pools. But some people put them under the pool as a pool liner pad too.
This particular roll is called Gorilla Guard by Blue Wave. Because it comes in a roll and not precut to size youll have to cut it to suit your pool size.
I wonder if the foam that goes under laminate flooring would work?
Roll Out And Install Liner
Time to unroll the liner inside the pool. The trick here is to lay it at the center of the pool and unroll from there.
Pro Tip: If it’s a sunny hot day, which is the best day to install, open the liner box and open it slightly so that your liner gets hot. This will make it stretchy and it will be easier to install.
This is best done with 2 people inside the pool. Bring it over to the walls and clip it inside the bead track. Your friends outside should help with clipping it all around.
Onces it’s clipped everywhere, using your feet, try to spread the bottom to flatten and get closer to the wall.
You should start bringing in water now. Pour in about 2 feet of water and stretch the liner to remove any creases as it is filling. If you don’t remove it now, it will stay forever.
Pro Tip: Get a water truck delivery. The Garden hose will take lots of time to get to that first 2 feet, which is essential to completing the installation.
Recommended Reading: Jones Beach Swimming Pool Hours
What To Put Under An Above
Are you considering buying an above-ground pool, but youre not too sure what will need to be done before the installation process? You might be asking yourself what is put under an above-ground pool to ensure safety and stability. Below, we will be providing you with everything you need to know about whats involved with planning for the addition of an above-ground pool.
What Will Happen If I Put My Above Ground Pool On Grass
You Can install your pool directly on top of the grass. However, doing so may lead to a disappointing outcome. Certain grass species like nutgrass Can easily penetrate Above the Ground Pool liner making the Pool look unsightly. The dead grass underneath the Pool will also smell bad once they decay, making the entire swimming experience less desirable. Additionally, placing the Pool directly On the grass will make the Pool unstable over time, thus endangering the life of people using it. So, if you are planning
Also Check: How To Build A Gunite Pool Yourself
Bring In Sand For Base
Our bases are built of sand. You will need to wheelborrow in the sand inside the pool. If you are going to a quarry, the best we have seen is screened sand, slight mix of clay. This allows the sand to compact firm. Do not use the popular mortar sand, which is often used for bricklaying.
Note: You can start bringing in the sand before the previous step. Just make sure that you lay down a piece of plywood or cardboard to protect your border. When you are done bringing in sand, make sure to re-level and inspect the area to walked over the stone dust to ensure it’s leveled.
We usually bring in 4 inches of sand inside for the base. You will find yourself roughly spreading it inside the swimming pool. But do not bring it against the stone dusk circle yet. You will need to have the wall installed before you do that. So simply add extra sand near the edges inside so that you will be able to level it later.
During pool installations with our crew, we usually have a few steps happening at the same time.
Above Ground Pool Installation Items
The following are links to various sections on our website ThePoolFactory.com where you can select pool liner installation items based off your above ground pool size.
Pool Cove is foam that easily peels and sticks to the inside base of the pool wall. The foam pool cove is 3-3/4 inches high and must be installed on top of 3 inches of sand. This will give you a total height of about 7 inches, the recommended height to support the liner and eliminate stress at the seam of the pool liner.
Also Check: Fastest Way To Heat Above Ground Pool
What Is An Above Ground Pool Pad For If You Have A Big Above Ground Pool
I honestly thought that a pool floor pad for big above ground pools was to protect the pool liner and stop it from getting rips or tears from stuff under the pool.
For little pools like mine tossed on the yard this is true, but Chad from the Above Ground Pros YouTube channel said this isnt the case for large, properly installed above ground pools.
In the video below he said in about 25 years of working on pools he has only seen about 2 tears in the pool liner caused by something coming up from underneath the pool.
Therefore, in his expert opinion, if youve got a good base layer of smooth sand laid down then your above ground pool pad is more for comfort on your feet than actually protecting the pool liner.
This is of course if you have done the work to build a flat, smooth base for your pool. A professional like Chad isnt just slapping an expensive pool down on rough ground like I do.
I hope this article has given your some ideas on what you can put under your above ground pool or inflatable pool.
Remember it is always a good idea to read the manufacturers instructions to see what they recommend so you dont void any warranties .
Mole Damage To Above Ground Pool
We have moles in the yard. It appears that they have gotten under out pool liner in one spot. What can happen to the pool, or liner, with these tunnels that have sunk in?
Is there anything we can do so this does not keep happening?
When moles get under an above ground pool and make a tunnel, the sand drops down, the liner drops down and you have an indentation in the liner with nothing under it. That means the slightest amount of pressure from a sharp object will cause the liner to burst open, usually draining the pool very quickly.
When these holes occur its best to drain the pool and put a piece of steel over the hole, redo the sand and refill the pool. Its not easy, but if you can do this while leaving a little water in the pool you are better off. A completely drained pool will cause the liner to shrink and shift.
If you just do the repair you will then want to get rid of the mole. If getting rid of moles is not going to be possible, you may want a more permanent solution, like putting the pool on a pad of concrete.
A less expensive, and less effective, solution is to use a layer of something like Gorilla Pad, carpet or Styrofoam under the liner.
Also Check: Hanby Outdoor Center
Installing An Above Ground Pool On Sand In 5 Steps
You can set up a steel frame or above ground pool on the lawn but you will have to take a lot of precautions and accept the fact that you do run the risk of damage.After , use a lawnmower to cut your grass as short as it can go in the area where the pool will be installed.
You May Like: Acid Washing Pool Cost