Thursday, May 23, 2024
HomeNewsHow To Pump Water Off Pool Cover

How To Pump Water Off Pool Cover

- Advertisment -

Importance Of Keeping Water Off Your Swimming Pool Cover

Removing Water From Pool Cover With My New Pump!

Importance of Keeping Water Off Your Swimming Pool Cover

The Benefits of a Pool Cover

Many homeowners opt to cover their pool with a pool cover, especially during the winter months. Simply put, a pool cover protects your pool when its not in use. It prevents debris from entering the pool, which cuts down on maintenance. Youll spend less time skimming your pool to remove unwanted contaminants and more time enjoying it. It also slows water evaporation and chemical loss. So you wont need to replace the water and chemicals as often. And it can reduce heating costs because it traps heat under the cover. But most importantly, a properly installed pool cover provides safety from drowning.

But with a pool cover, water can build up on top of the cover. This excess water can cause the water in the pool to be displaced, and it presents a drowning hazard. The continuous weight of water on the cover will also shorten the covers lifespan. Removing this excess water is essential to maintaining your cover and keeping your family safe. A pool cover pump will accomplish this task of getting rid of unwanted water.

Removing Water From Your Pool Cover

Automatic vs. Manual

Pool Cover Pump Maintenance

Help Cleaning A Winter Pool Cover

The Pool Butler offers year-round service. Even when your pool is closed, were here to keep it healthy and safe. That means regular pool cover cleanings. We have all the tools and the know-how, and you can leave the whole process up to us. Contact us today to learn more and receive your free estimate.

Remove Water From Your Swimming Pool Cover

Maybe youve just survived a large rain or snow storm and want to perform some preventative maintenance in order to ensure that your pool cover lasts for the remainder of the winter, or maybe youre just opening your pool for the season. It doesnt matter what has prompted you to do so, but sooner or later, all pool owners will be faced with the task of removing the yucky water that has accumulated on top of the cover. Whether you have an above ground, or in ground variety, if you cover your pool to prepare it for winter, it will inevitably collect water prior to you taking it off to use the pool again in the summer. If left on there under heavy rains or snows, the weight could be so burdensome that it pulls the whole cover into the pool to create a disastrous situation for you to clean up. If youre lucky enough to not have to remove some mid-winter water accumulation, then you will still be faced with proper removal to be able to open your pool when the weather changes.

Read Also: Mandalay Bay Pool Complex

Manual Pool Cover Pumps

This type of pump needs to be physically turned off and on. Some manual pool cover pumps are hand-operatedand use the power of water pressure to remove standing water, instead of electricity or batteries. Manual pool cover pumps drain about 200 GPH and are recommended for smaller above-ground pools or spas.

Advantages of Manual Pumps:

  • Less expensive
  • Lightweight and very portable
  • Smaller size Good for most above-ground pool and spa covers also useful for emptying spas and hot tubs.

Always Remove Excess Water From Your Tarp Style Winter Cover

How to use a Submersible Pump to Remove Excess Pool Water

It is vital to remove excess water from solid tarp style winter covers, commonly used on above-ground and some in-ground pools, to avoid damage to the cover and the pool. This can easily be done with a submersible pump on your pool cover whenever temperatures are above freezing, and liquid water is present. This frequently occurs in fall before freezing temperatures arise, during winter when unseasonably warm temperatures exist for several days in a row, and in spring as temperatures begin to rise.

Above-ground Pool Tarp Cover: The typical tarp style cover is secured to your above-ground pool wall and top ledge with a steel cable that is tightened around the pool. As water accumulates on the pool cover, unless the water in your pool is frozen, the water weight on the cover displaces water from inside your pool, out through the return hole and/or skimmer. As this occurs, stress increases as your pool cover strains against your pool wall and top ledge.

Consider that water on a 24 round pool weighs about one ton per inch deep. So, six inches of water on your pool cover, weighing over 6 tons, can put a fair amount of strain on the cover and pool.

As stress from water weight on your cover increases, first, your cover starts to stretch. This can lead to thin spots, pin holes and tears in your pool cover. As the cover pulls the steel cable up against your pools top ledge, the top ledge can be broken and even pulled off the pool wall.

Posted onbya1pool_fun|Posted in Service

Don’t Miss: 40000 Btu Pool Heater

What To Consider Before Buying Water Pump For Pool Cover

Even deciding on an insignificant purchase can make you feel like choosing between the red pill or the blue one. But is the headache really worth it? Online shopping was meant to make our experience simpler, easier and enjoyable. But in reality it is quite easy to get confused on the decision which one to buy?.

This is where our efforts come in! This list of water pump for pool cover will surely save you valuable time and effort. However another question remains, what makes our compilation the best? Or on what basis you should trust this water pump for pool cover list.

Is it virtually possible to know every detail of a product for making a perfect purchase? The answer is definitely NO, its not! Then how do you make the correct decision while buying water pump for pool cover? Well, the complexity of selecting a single product from a sea of them can be simplified taking into consideration a few key metrics regarding the product.

We feed thousands of data to our AI regarding these products through advanced algorithms. Based on the relevant data i.e. brand, features, specs, ratings and reviews and many others a list of best water pump for pool cover has been prepared by the AI.

Draining Water From A Pool Cover With A Pool Pump

The first option for draining water off of your pool cover is to use a pool pump and a garden hose.

Disclaimer: Some of the links below are referral links, which means that if you make a purchase, there is no extra cost, but Running A Household will receive a commission.

Step 1: Connect garden hose to pool pump.

Tip: Confirm that the hose is attached. If not, the hose could pop off underwater and slow or stop the draining process.

We love the Little Giant Pump. It seems to have enough horsepower to get the job done.Weve tried other pumps, but this one seems the quickest, and has lasted for years.

This pumps gets a lot of use. During the swimming season, it comes in handyto drain the excess pool water after a heavy rain.

Step 2: Determine where you want the pool cover water to drain. Stretch out your garden hose so that the water can drain freely from the end of the hose that is not attached to the pool pump.

Step 3: Drop the pool pump into the water on top of your pool cover.

Tip: Our local pool company suggests placing the pool pump on top of a garbage can lid. Most pool covers are made of a mesh material. Therefore, it is possible to actually drain the water from underneath your cover, unless you put the pump on a lid.

Step 4: Plug pool pump into grounded outlet.

Step 5: Confirm that the pool water is draining.

For more details about the pool pump, click here:

Don’t Miss: Why Are Chlorine Tablets So Expensive

How Do I Get Water Off The Top Of My Pool Cover

pool covercoverwatertopcoverwater offpool cover

. Keeping this in view, do you have to pump water off pool cover?

It is vital to remove excess water from solid tarp style winter covers, commonly used on above-ground and some in-ground pools, to avoid damage to the cover and the pool. This can easily be done with a submersible pump on your pool cover whenever temperatures are above freezing, and liquid water is present.

One may also ask, should pool cover touch water? Your pool water level should not be too low, as the water must support the cover in situations where you receive a heavy snowfall. At the same time, ideally you don’t want the water to touch the underside of the cover under general conditions as that contact will create a wet spot where debris will accumulate.

Also, how much water should be in the top of a pool cover?

On the surface, an inch or two of water on your pool cover doesn’t seem like a lot, but an inch or two of water across the surface of a pool can add up to several gallons. You may think that you can ball up the cover and just lift it off with the water still inside, but a single gallon of water weighs over 8.3 pounds.

How long does it take to drain a pool with a garden hose?

The average outdoor spigot on a home will produce roughly 4 to 12 gallons per minute. A small pool could take just a few hours to fill, while a large one might take 14 hours. You can get an idea of how long it will take by using a pool fill time calculator.

Why Do I Need A Cover Pump In The First Place

WAYNE WAPC250 Pool Cover Pump

So you havent exactly had sunny days recently. Sorry about that. Whether during the closed-pool winter months or during a particularly gloomy storm, your pool cover keeps rainwater, snow, and/or debris like leaves, twigs, and dirt from falling directly into your pool. Instead, all these not-pool-friendly elements will sit on top of your pool cover. But heres some bad news: theres a limit to how much weight your pool cover can bear. If left alone, itll eventually sink down into your pool, taking all that water and debris down with it. Talk about counterintuitive.

Hence the pool cover pump. This small device sits on top of your pool cover and sucks off all that heavy water. In other words, its your saving grace for keeping your cover secure. It also serves as sort of a safety net if a child or animal falls in, and prevents costly maintenance. You dont want a mess so big that youll need professional help, but without a cover pump thatll be your realityand theres no better reality check than having to write a big check.

If youre all for minimizing unnecessary expenses, its time to upgrade your main pool pump for one that works more thoroughly, includes a warranty, and significantly cuts down your cost of operation. The Black & Decker 2HP Energy Star Variable-Speed Pump pays itself off in energy saved in under two years.

Don’t Miss: Kernersville Ymca Outdoor Pool

Using An Electric Pump To Drain Pool Cover

Another method you can employ for this task is to use an electric pump.

As with the other methods, you will need a hose that can be inserted into the water in order for it to be sucked from one place and put it somewhere else.

The main difference is how this method works: instead of using gravity or siphoning, which rely on pressure differences between two points, electricity does all the work for you by forcing the water from one end to the next.

The steps for this option are as follows:

1# Skim the top of the pool cover

First, remove dirt and debris on the pool cover to ensure that the electric pump has a clean surface to work with. This helps prevent clogging up the pump when you start the cleaning process.

2# Prepare the pump

Next up, you will need to attach a hose and insert it into the water on the pool cover, as well as connecting the other end of the hose to your electric pump. Check if there are any issues with the pump to gauge if its in working condition. Fix any damaged parts before turning on the pump.

3# Place the pump on the water

Electric pumps differ and there are some that come with a pipe that you simply need to place in the water while others come with a suction hose which is placed into the water instead.

Whatever approach has been used, place the suction end of the pump into the water on the pool cover.

4# Place the emptying end at a collection point

5# Connect the power and run the pump

6# Clean up your pool cover once the water has been removed

Re: Pumping Off Pool Cover Water Back Into Pool

This is what I do during the winter in order to dilute the pool water to keep salt levels in check and refresh the water. I have the output end of the hose attached to the pool cover pump feed under the cover into the pool. The only problem would be if your cover gets really dirty with a lot of organic matter that gets into the pool, but even then this just creates more chlorine demand. The pool cover pump has a screen so most stuff on the cover doesn’t get into the pool. If you were thinking of just dumping the cover contents into the pool, that might be more of a problem, but again, mostly just more work for your pool cleaner and a higher chlorine demand and you can always just filter the water through a screen or old T-shirt if you’ve got someone to help you out with the cover.It’s certainly a less expensive and more environmentally friendly way to get water than using tap/fill water.Richard

Recommended Reading: Tropicana Outdoor Pool

Removing Leaves From A Pool

If leaves have found their way into your pool while it is uncovered, heres how to remove them quickly and efficiently:

  • Use a pool rake to gather and remove leaves, allowing them to dry if possible before hauling them away. Ideally, you want to make two or three passes around the edge of the pool before moving inward.
  • Another option is to use one of the many leaf vacuums on the market. They use pressure from a garden hose to draw leaves into a collection bag. They are a good option when there is a large volume of leaves in your pool.
  • After making a few passes with a leaf rake or vacuum, you may need to gently brush the bottom or sides of the pool to free any leaves stuck there before collecting them.

Top 8 Best Pool Cover Pumps Of 2022 Reviews

300W Automatic Swimming Pool Winter Cover Water Pump 1700 GPH 1/3 HP ...

Having difficulty removing accumulated water from the top of your pool cover? You are not alone. All pool owners face the same problem when opening their pools for the seasons.

Before buying the best pool cover pump, you should know what kind of best pool cover pump you are buying. Their specifications and usage instructions differ from each other.

The number of pool cover pumps available in the market is very large. Thus, it can be a little difficult to buy the best pool cover pumps which suit your needs perfectly.

Below, youll find the features and the pros and cons of some of the best cover pumps. So, depending on your requirements, you can pick one which you think is perfect for your pool!

This article will definitely save you a large amount of time and effort. It will help you in choosing the best pool cover pump suited for your needs! So, have a look at the eight best pool cover pumps!


  • 500 GPH Universal Pool Cover Pump
  • You May Like: Getting Iron Out Of Pool Water

    How To Prevent Water From Collecting On Your Pool Cover

    While removing water might seem like a task you do at the beginning of every pool season, its in your best interests to supervise your pool cover on a regular basis . You should keep an eye out for sagging due to excess water collection.

    A dead giveaway of sagging in your pool cover is the formation of a dip in the center of the pool cover. Dips in pool covers are not a good sign as they can damage pool walls or lead to molding and the formation of mildew. Since sagging takes place because of water weight, it is good practice to make sure as much water stays off the cover as possible to extend the lifespan of your cover.

    Here are my top tips to follow to prevent water from collecting on your pool cover:

    Weigh the edges down. Heavy water bags or pool pillows placed at the edges of your pool cover will help prevent it from sagging. Place the bags or another type of weight along the edges of your pool evenly for best weight distribution.

    Fix and adjust as soon as possible. Give your cover a check now and then whenever you pass by it and adjust the corners immediately if you notice even a little sag. This is especially vital after a big storm.

    Ensure proper installation. Make sure the pool cover is securely and efficiently tightened in place during the installation process. If youre doubtful about whether this has been done, have a professional look it over.

    How Do You Drain Water Off A Pool Cover

    drainwater offcoveroffStep By Step Instructions: Siphoning a pool cover with the Slide N Pump.

  • Getting Ready.
  • . Hereof, should you drain water off pool cover?

    As water builds up on your cover, it can pull the water bags, or other weights, into your pool which will allow excessive dirt and debris to enter your pool, making spring clean up more difficult. In spring, drain the water off your cover early to allow any remaining water a chance to dry up.

    Also, how do you start a siphon with a hose? To siphon water, start by submerging one end of a hose or tube in the water you want to siphon out. Then, put the other end in your mouth and gently suck in. When the water is about halfway through the tube, remove the tube from your mouth and put it into an empty container lower than the original water source.

    Also to know, how do you siphon water out of a pool?

    Screw a hose cap onto the open end of the hose while it is still submerged. Lift the end of the hose out of the water and pull it to the drainage area. Place the hose on the ground or close to the drain or cleanout. Remove the cap from the end of the hose to start the siphon.

    How do you siphon water with a hose uphill?

    You May Like: Build A Inground Pool Yourself

    - Advertisment -

    Most Popular

    - Advertisment -