How To Put An Above Ground Pool In The Ground

Choose The Size And Shape Of Above

The size and shape of the pool are important since these factors affect the cost of the pool and its maintenance, as well as its ability to fit well within your yard.

The size of the available space helps to determine the eventual size of the pool. The cost of water should be figured in, too, since treated water comes at a cost for all municipal users.

Above-ground swimming pools range from small wading pools to large round, oval, or rectangular pools.

Based on 2021 findings from Home Guide.

G How Much Do Inground Vs Semi

A semi inground pool costs from $6,800 to $20,000 on average. The price varies based on the size, shape, materials and prep work required to install it. This option is partially above ground and partially below. Its often cheaper than an inground model and is ideal for those who live on a slope or hill.

Hire an Above Ground Pool Installer Near You

Cost To Buy An Above Ground Pool In The Ground

All the pools mentioned above cost about the same. It might interest you to know that the best semi-inground pool is usually the cheapest. That is the Aquasport 52; this is why I dont sell the other pools.

• A 24 Round Package Cost $5000.00 $6000.00
• 15×30 to 17×32 Oval Package Cost $6500.00 $7500.00

You May Like: How To Repair Cracks In Concrete Pool Deck

Bring In Sand For Base

Our bases are built of sand. ;You will need to wheelborrow in the sand inside the pool. If ;you are going to a quarry, the best we have seen is screened sand, slight mix of clay. ;This allows the sand to compact firm. ;Do not use the popular mortar sand, which is often used for bricklaying. ;

Note:;You can start bringing in the sand before the previous step. ;Just make sure that you lay down a piece of plywood or cardboard to protect your border. ;When you are done bringing in sand, make sure to re-level and inspect the area to walked over the stone dust to ensure it’s leveled.

We usually bring in 4 inches of sand inside for the base. ;You will find yourself roughly spreading it inside the swimming pool. ;But do not bring it against the stone dusk circle yet. ;You will need to have the wall installed before you do that. ;So simply add extra sand near the edges inside so that you will be able to level it later. ;

During pool installations with our crew, we usually have a few steps happening at the same time.;

Leaks In The Filter System

1

Examine all hoses from pool skimmer to water return.

2

Look for signs of water dripping from connections or holes in hoses.

3

Replace hoses with holes. Place a plug in each end of the filter system to keep water from rushing from pool when hoses are removed. Loosen clamps at each end of hose; remove leaking hose; attach new hose; tighten clamps.

4

Tighten any clamps where water is found dripping.

5

Add Teflon tape to any threads that are leaking. Port attachments that screw into the filter system need to be wrapped with Teflon tape. Remove; add tape and reattach.

Don’t Miss: Where To Buy Swimming Pools

Location Of Current Things And Future Things

Sheds, playground sets, dog kennels, dog runs, gardens, and abandoned engine blocks can all take up some space in your backyard. When choosing a good site for your pool, make sure you have room for these structures and the activities that go along with them. With a shed, make sure there is still room to get that lawn mower in and out. For obvious reasons, you wont want your new pool to be too close to that swing set. And keep that engine block in view. You dont want to crush your teenage kids dream of one day rebuilding it.

Best Choice Products Pro 2400gph 13 Sand Filter Above Ground Swimming Pool Pump 10000gal

Best Choice are one of the most popular manufacturers of pumps and filter systems for above ground pools. The Pro 2400GPH model is easy to install and easy to use.

This sand filter pump system complies with CSA standards.

The Pro 2400GPH 13 also fits most current surface pools and is a cost-effective low maintenance option to keep your pool clean and free of sediments.

The sand filter drum measures 23.5 H × 13W with capacity 42 lb. sand filter. Has a size of 18.5 x 26.5 x 23.5 inches and weighs 26.2 pounds.

This system has a powerful 2.4 gallon per minute pump and a 4 function valve.

The Bad

• You need to buy sand separately as this will not come with the filter.

The Good

• The sand bed has a large capacity, which allows it to trap a greater amount of dirt and use longer filtration cycles.
• It works with elevated pools of up to 10,000 gallons and has a self-priming pump.
• The pump is thermally protected and the filter basket is included.
• The size of the sand is 0.018-0.022 inches. This tiny size means it will catch a lot more dirt and sediments.
• It is labeled ETL listed. This means that the product has been independently tested and meets the applicable safety standard.
• It has a large capacity sand bed.
• Comes with a 60 day guarantee.

Also Check: How To Clean Tile Grout In Swimming Pool

Roll Out And Install Liner

Time to unroll the liner inside the pool. ;The trick here is to lay it at the center of the pool and unroll from there. ;

Pro Tip: If it’s a sunny hot day, which is the best day to install, open the liner box and open it slightly so that your liner gets hot. ;This will make it stretchy and it will be easier to install.

This is best done with 2 people inside the pool. ;Bring it over to the walls and clip it inside the bead track. ;Your friends outside should help with clipping it all around. ;

Onces it’s clipped everywhere, using your feet, try to spread the bottom to flatten and get closer to the wall.

You should start bringing in water now. ;Pour in about 2 feet of water and stretch the liner to remove any creases as it is filling. ;If you don’t remove it now, it will stay forever.

Pro Tip: Get a water truck delivery. ;The Garden hose will take lots of time to get to that first 2 feet, which is essential to completing the installation.

Above Ground Pool Installation Items

The following are links to various sections on our website ThePoolFactory.com where you can select pool liner installation items based off your above ground pool size.

Pool Cove is foam that easily peels and sticks to the inside base of the pool wall. The foam pool cove is 3-3/4 inches high and must be installed on top of 3 inches of sand. This will give you a total height of about 7 inches, the recommended height to support the liner and eliminate stress at the seam of the pool liner.

Recommended Reading: How Do I Reduce Cyanuric Acid In Pool

Gph 19 Sand Filter W/ 1hp Above Ground Swimming Pool Pump

This is one of the most efficient above ground pool sand filters and pump systems. It is very easy to install and easy to operate.

The filter itself is a one-piece blow mold tank that rests on a universal base that you can use with most pumps. This system is recommended for pools of up to 18,000 liters of water.

Its size is 29 x 19 x 37 inches and has a weight of 35 pounds. This tank also has a capacity of 175 pounds of sand, which is not included in the purchase price.

The Bad

• You may need to buy sand, additional accessories or adapters.

The Good

• The filter has a universal base that can accommodate most pumps.
• Has a self-priming pump.
• Its an efficient filter that is also easy to clean.
• The 1 horsepower pump has a flow rate of 4.5K gallons per hour and does not require a primer.
• The sand in the filter is easy to change.
• Also has a 6 position valve and a large capacity sand bed that helps trap more debris.
• The instructions for assembly are very clear and easy to follow.

Above Ground Pools That Look Like Inground Swimming Pools Hardscaping Patios & Wooden Decks

Making an above ground pool look like an inground is all about perspective.

• Step 1. Sink your above-ground pool into the ground two-three feet.
• Step 2. Backfill to the top of the pool and lay pavers or build a deck to the hight of the top of the swimming;pool.

To wrap this pool, most of what they used was cinder block and sand. Then they covered the block with a beautiful patio block and bullnose coping.; Finally, they used a stone veneer to dress the wall. Inexpensive and simple design that looks amazing and provides an excellent sitting area.

Thats all it takes! You dont need to wrap the whole pool or put in a waterfall as they did here. Most people place a small patio or deck on the side of the swimming;pool where the ground is highest. The area commonly found between the house and the pool.

Recommended Reading: How To Take Calcium Off Pool Tile

How To Level An Above Ground Pool After Its Been Filled With Water

If your water level is off by more than three inches you should fix it. We wish we could give you a simple fix to level a pool that has been filled with water but there are too many safety issues with the often-used simple fixes. Here is the best solution to level a pool that has been filled with water for having a fun and safe pool season:

Taking the steps outlined above will ensure your above-ground pool can be used the entire pool season, and potentially for years to come without the concern of a potential burst or warping of the track/frame. Its the least you can do to keep your investment and family safe.

How To Install A Base For Your Above Ground Pool Liner

Many do-it-yourselfers installing an above ground swimming pool for the first time have questions regarding how to properly install a base underneath a pool liner.

This article will illustrate the correct way to do this in order to make the installation go smoother and protect the pool liner and pool wall from being damaged.

One of the biggest problems that we see is with the height of the base beneath the above ground pool liner. When the sand base is not high enough there is excess strain put on the pool liner and pool wall, and this tremendous weight of the water can easily cause the vinyl pool liner to blowout and/or the metal pool wall to be pulled down.

Pool liners are obviously not built to withstand water weight, they are simply made to line the inside of a pool to hold the water. Therefore, when installing a new swimming pool or a new above ground pool liner it is extremely important to make sure that the vinyl pool liner is supported by the proper height sand base. There should be NO AIR SPACE between the vinyl pool liner and the base that it should be resting on.

Don’t Miss: When Do Pools Open In Utah

Solutions On How To Level An Above Ground Pool

On a hot summer day, it is hard to beat the refreshment offered by a cool swimming pool. The cool refreshment, however, is only possible when the swimming pool is properly installed and level. If the pool is not level, you will end up with an unnatural shallow end to the pool. Besides being unsightly, improperly installed pools are unstable. They risk the injury of bystanders and swimmers in the event of a collapse.;

Taking your time to ensure that your above-ground pool is level guarantees a safe swimming experience. In this article, we will show you how to level an above ground pool.;;

C Pool Heaters Covers & More

Other popular add-ons include:

• a href=”https://www.homeadvisor.com/cost/swimming-pools-hot-tubs-and-saunas/install-a-swimming-pool-heater/”>Adding a heater to your pool costs between $300 and $2,000 depending on the model.
• Winter covers start at less than $100 and go up to more than $1,000.
• A pool fence costs from $1,500 to $10,000 on average. Many states and municipalities require safety fencing around pools.
• Fountains & Waterfalls

  A stand-alone fountain runs from $30 to $100 on average. You can add a waterfall to your above ground pool for as little as $130 before landscaping costs.

Compare Project Costs From Top Local Pros

Also Check: How To Lower Cya In Pool

Install Strucuture Part 2

It’s now time to finish the structure. ;Start by leveling all the posts that you installed earlier. ;The pieces of the top cap and posts are different for every pool, so make sure to consult with the “instructions” provided in the box.

Yours posts should somehow be lightly secured to the wall. ;It’s now time to install the top rails. ;One you have installed at least 3 top rails, your friends inside the pool should be able to jump out from that area, assisted by the friends outside.

Finish installing all the top rails and add the top caps as well. ;Your pool should be looking really nice at this point. ;You are done with the major structure now.

How To Level The Ground For A Pool Without Digging: The Easiest Way

If you are a do-it-yourselfer, you must be wondering how to level the ground for a pool without digging. It is difficult to imagine a more significant threat than diving into a refreshing pool on a scorching summer day. This dream is quickly fused if the pool is not correctly installed or leveled.

If you place an above ground pool on the unlevel pool you will find yourself with an unnaturally deep end on one side of the pool. Not only does this look bad, but it is also dangerous.

An improperly installed pool can be a big hazard for anyone using the pool as the force of the water can break out the side of the pool and violently push the contents, including the swimmer, out of the pool.

Not only will you risk injury to the people in the pool, but you also run the risk of hurting anyone standing outside of the pool. This would mean the end of summer fun as you know it. To stop this from happening, take your time, get it right, and level it the first time. The following will teach you how to level the ground for a pool without digging.

Recommended Reading: Are Walmart Pools Any Good

Above Ground Pool Installation Guide

Installing an above ground pool is an easy weekend project for 2-3 people. Why pay some company more than the cost of the pool to install your aboveground pool? If you work out their hourly rate, youre being charged over $300 per hour for above ground pool installers. Do it Yourself and install your own pool!

With just 1-2 helpers, and some simple hand tools and a drill, you can have an above ground pool installed and filling with water from the hose in 1 day. If you have a sloping hillside or drainage issues or are sinking a pool into the ground, itll take 2 days of work. One day to cut and grade the earth, and the following day for pool assembly.

What Are Your Other Options

Of course, you do have other options. First and foremost being, if you really want an in-ground pool, you should adjust your expectations. It is the simple fact that putting in an underground pool will probably cost you a lot. This investment is equal to the amount of work involved, and the additional complexities associated with putting your pool underground. Your pool needs a proper pool deck, a proper pump, regular maintenance, and many other features that are not present with an above-ground pool.

So our number one tip to you is to adjust your expectations. Above ground pools are fun and enjoyable in their own right, but they cant mimic underground pool. If you want to transform your backyard space around a pool, you will have to be willing to invest.

We hope our article has answered your questions about your pool. Theres still plenty of fun to be had with an above ground pool!

You May Like: What Is The Best Pool Vacuum

Watch This Video For Step

What youll need:

• Drill
• Box Knife
• Masonry Sand
• Spray Paint
• Skid steer
• Shovel
• Rebar
• Pavers
• Bungee Cords
• Transit
• Small carpenters level
• Wide Trowel
• A Couple of Extra Hands

Resource Materials: