Tuesday, April 9, 2024
HomeGroundHow To Remove Above Ground Pool

How To Remove Above Ground Pool

- Advertisment -

How Much Does Above

How to Repair a Lawn After Removing an Above Ground Pool

Do you have an above-ground pool you wish to demolish? Whatever your reasons for demolition are, one thing youll need to find out is the cost of the project.

In other words, you want to find out how much it cost to remove your above-ground pool. Were here to help.

Getting rid of an above-ground pool requires multiple procedures.

Luckily, it isnt as challenging and as costly as demoing an in-ground pool. This means it will cost you less to have above ground pool removed than it would an in-ground pool.

However, we arent here for comparisons but to provide answers on these pool demolition options.

Cost To Remove An Inground Pool

The average cost to remove an inground pool is $4,000 to $16,000, depending on the size, depth, material, and accessibility. Partially filling in an inground pool costs $2,000 to $10,000 and involves demolishing the concrete and using the rubble as backfill.

Cost to Remove an Inground Pool

Pool Size
$4,000 $16,000

The pool’s material and access for equipment also affects the labor cost of removal.

  • Concrete and gunite pools require larger, heavier equipment and cost more to remove. The concrete needs to be broken up into pieces and hauled away. For cheaper fill-ins, two to six holes are drilled through the bottom of the pool and filled with 18 pea gravel to facilitate drainage. The edges and sides of the concrete pool are demolished and used as backfill.
  • Vinyl and fiberglass pools are typically less expensive to remove, but partial removal is not possible. The entire fiberglass shell must be broken-up and hauled away. For vinyl-lined pools, all the steel, aluminum, plywood, or concrete backing must be removed after an engineer deems it safe.

How To Move An Above

  • Written by Justin Stewart on Oct 04, 2009To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience.Reviewed by

What You’ll Need

Moving an above ground pool requires a lengthy process, but it’s ultimately not too difficult task. It calls for a methodical approach and average DIY skills.

Step 1 – Decide Where the Pool is to be Moved To

Check the suitable locations and choose one that will support the pool.

Step 2 – Empty the Pool and Prepare the New Site

Empty the pool. While the pool is emptying you can start to prepare the new site. You need to level it and mark out where the pool will sit. Use a rope the length of the radius of the pool tied to a stake to mark the circumference of the pool in the new location.

Step 3 – Dismantle the Pool

Starting at the top of the pool, take the pool apart. If you have built a surround, that must come down first. If it will help, mark each piece as you remove it so you know where to replace it when you are rebuilding the pool. If you still have the instructions for constructing the pool, follow these in reverse and the job will be much easier.

Step 4 – The Pool Liner

Before you can roll the pool wall you need to remove the above ground pool liner. The likelihood is that it will be much better to replace the pool liner with a new one. The old liner will be difficult to handle and quite fragile.

You May Like: What Hotel Has The Best Swimming Pool In Las Vegas

Filling In A Pool With Concrete

Pool companies will not fill in a swimming pool with concrete, as the cost is far higher than it is to fill a pool with dirt. However, a partial removal involves filling the pool with the broken-up concrete from the demolition, which is cheaper and requires less dirt.

A full swimming pool demolition is required if you are looking to build a new structure afterward. Installing a concrete slab costs$4 to $8 per square foot once the pool is filled in.

How To Repair Yard After You Remove An Above

Snap Junk Removal Houston Demolition Services

In Lawn & Garden by JamieJune 16, 2020

Above-ground pools are common among peoples yards. But when its time for removal things can get tricky. I had to remove my above ground pool a few years ago because it was falling apart. In this article, I want to teach you how to repair the yard after removing your above ground pool!

Its either it was already in the property when you bought it, or you purchased and installed the pool to have something to cool you down over the summer. However, the charm of that pool would eventually fade, and its just a complete eyesore in the backyard. You want to remove it the proper away. People remove above-ground pools for so many reasons, aside from not wanting or needing the pool anymore.

You might have other plans for your yard rather than having a vast pool there. It might be occupying too much space that you can build something else there. Whatever the reason, removing the pool would entail a lot of work and money. So, before you decide, here are a few things to consider before getting rid of an above-ground pool.


You May Like: Is The Pool Open At Winstar

Pool Removal Cost Depends On Several Factors Like

  • Type of pool
  • Size of the pool
  • Accessibility of the pool area
  • Method of pool removal
  • The contractor you choose

The average cost to remove an inground pool ranges from $3,500 to $15,000 for a medium size pool with relatively easy access.

Costs can rise to well over $10,000 for a large pool with a large deck and difficult pool access.

The cost to remove an above ground pool varies considerablyâjust like inground pool removalâranging from a few hundred dollars to as much as $5,000 or more in some cases.

Learn more about the cost to remove a pool:

Why Should I Drain My Above Ground Pool

As noted, typical maintenance or winterizing your pool shouldnt require you to completely drain the water. You risk damaging your pool liner and the structure of your above ground pool. Here are a few times when you would likely have to drain all the water.

  • Pool water quality that cant be fixed with chemical treatments and proper maintenance

Read Also: Painting A Concrete Pool

Complete Vs Partial Removal

Because only part of the swimming pool is being removed, a partial removal costs less money. However, the broken chunks of concrete and other rubble from the pool serve as the base that fills its bottom. The hole is then topped with dirt and a final layer of top soil. Usually, this works well enough, but if not performed correctly, the process can result in sinkage, swelling or a lack of proper seepage.

With a complete removal, everything comes outall the concrete, the rebar, everything. Once the pool is gone, the hole is filled with gravel and dirt, compacted, graded and finished with a layer of top soil. This method decreases the chance of anything going wrong in the future, especially if the backfill is performed by an engineering technician.

Either way, youll need to disclose the pools partial or complete removal when you sell the property. Keep all documentation regarding its removal, and take photographs to show the state of the pooleither partially or completely removedbefore it is covered up. The fact that you removed the pool should have little impact on your homes value.

Tips To Make The Job Easier

How To Remove an above ground pool

I have some tips to make your job and life a little easier.

  • First, please have enough patience for this job and be organized for this project. It will take at least three to four days from start to finish. Don’t try to rush this process, as it is bigger than you and it will win.
  • Next, be prepared for problems. Rust can make the job tougher. Metal pieces will break off and bolts don’t always unscrew.
  • Lastly, you may need help to lift the metal wall sections out and roll up. They are heavy so don’t strain yourself. If you cut the wall into smaller parts, roll it up and tie it with a rope or bungee cord. It will be much easier to remove.
  • You may want to take the parts down to the local dump if allowed in your area. I’m not sure the trash collector would be so happy to see all this at the curb.

I know you can do this job by yourself, since I did it by myself.

If you can get help, then do so! Make a party out of it. Offer refreshments and have a BBQ!

Read Also: Is The Mandalay Bay Pool Open

How To Remove A Winter Cover From An Above Ground Pool

Have you ever taken your winter cover off the swimming pool and had all the leaves fall into the pool as you were pulling the cover over the top rails? Do you use an inflatable air pillow under your winter cover to disperse snow and water on the cover evenly?

If you answered “yes” to both of these question and the air pillow hasn’t popped due to a harsh winter, you should follow these instructions for removing the winter cover from your swimming pool each Spring.

  • Prepare your filter system for the season and attach it to the pool with the filter hoses.
  • Pump the excess water off the winter cover with a cover pump. Also, be sure to remove all the leaves, sticks and debris from the winter cover. This can be done easily with a leaf rake.
  • Unfasten the winter cover cable.
  • Insert the garden hose under the winter cover and start to fill the swimming pool with fresh water to within a few inches below the top rail of the pool. Filling the pool with fresh water will raise the winter cover up while lifting the air pillow to above the top rails.
  • Hose off and clean the winter cover using a cover cleaner.
  • Allow the winter cover to dry in the sun while still on the pool. Then, remove it from the top of the pool. It’s clean and easy!

Nothing deteriorates a winter cover faster than storing it for summer with dirt and debris attached to it from the winter.

  • As featured in

Additional Things To Consider When Draining Your Above Ground Swimming Pool

Although the process of removing the water from your swimming pool is straightforward, there are some risks associated with this maintenance process, specifically with the pool liner. If you are not draining your above ground pool to replace its liner, there are some important factors to consider prior to starting in order to protect the integrity of your pool, which include:

  • Damage from the Sun: The water in your swimming pool helps to protect your liner from any damage that is caused by UV rays. Once the water is completely removed, your pool liner is at risk to warping from the sun. LinerWorlds pool experts recommend draining your above ground pool when its overcast outside.
  • Development of Mold: If youre removing the water to relocate or store your pool over the winter season, its important that you take extra steps to prevent mold build-up on your pools liner. This common problem is caused by packing up your liner before its completely dry. Make sure to use towels or a wet vac to thoroughly dry the vinyl prior to storing it for the season.
  • Loss of Shape: Above ground swimming pools hold their shape due to water. When about 75% of the liquid is drained, your pool will experience some loss of shape. Its important to protect your pool from collapsing by draining it on a day where there are no high winds or bad weather that could cause the empty pool to become damaged.

You May Like: How Do You Build An Inground Swimming Pool

Option : Filling In A Pool

How It’s Done:

Filling in a pool involves draining the pool, punching holes in the bottom, demolishing the top layer of the pool , placing the rubble in the bottom, filling in the pool with additional dirt and topsoil, and compacting the soil.

Partly removing and filling in a pool is the most common form of pool demolition and is generally the least expensive option.â

Pros of Pool Fill In

  • The most affordable option of inground pool removal
  • Fastest to complete – typically 2-3 days

Cons of Pool Fill In

  • This will be something you have to disclose to future buyers of the property, and it could affect the value of your home.
  • If this method isn’t performed properly, there is an increased risk of sinkage, swelling, or lack of proper seepage.
  • A majority of cities consider the area of the former pool to be non-buildable, meaning no additions or dwellings can exist there. However, the area is still suitable for sheds, concrete, landscaping, trees, etc.

Do You Need A Permit To Fill In A Pool

Above Ground Pools â Pool Fill In, Pool Removal and Pool ...

That depends on your local government, but in many cases, a permit is required.

The cost of a permit can be anywhere from free to several hundred dollars depending on your local municipality.

Many local governments have rules regarding how a pool must be removed. Some may have zoning ordinances or codes stating that a pool must be completely removed, not just filled in. If partial pool demolition and removal is allowed, there may be specific protocols on how the pool must be filled in

Recommended Reading: How To Clean Concrete Pool

Cost To Remove A Pool

How much youll pay to have your pool removed depends on a number of factors. Obviously, the larger your pool, the more youll pay, but theres more to it than that. These additional factors contribute to the cost of removing a pool:

  • Type of pool
  • Accessibility of the pool area
  • Method of pool removal
  • How much debris there is to remove
  • The type of debris
  • Machinery required
  • The company you hire

Since pool removals can be so expensive, youll want to get multiple estimates to make sure you are going with the best removal method and getting the best price. Estimates should be in writing and include the following details:

  • Start and completion date
  • Payment schedule
  • Responsible party for obtaining and paying for permits
  • Charges pertaining to the permits, if the company is obtaining
  • Specifically what work will be done
  • Equipment that will be used
  • Process for change orders
  • Company contact information

Choose Your Pool Draining Method

If it is time to empty your pool, there are two main options that pool owners typically choose from when getting ready to drain their above ground pool an electric pump or a garden hose siphon. Either choice will work to drain your pool water. Its a matter of preference, time, and equipment on-hand. Here is a round-up of each drain method and the steps needed to complete the process:

Don’t Miss: Half Mansard Screen Enclosure

Pros And Cons Of Filling In A Pool

The most significant advantage of filling in a pool is eliminating all future swimming pool maintenance costs, which is $1,000 to $1,800 per year. Plus, removing a pool increases your home’s value and makes it more appealing to buyers. Others look forward to getting their yard space back.

Pros and Cons of Filling In A Pool

An experienced, quality-focused contractor will be invaluable when going over every aspect of the pool demolition before work begins.

How To Repair Yard After Above

How To Disassemble An Above Ground Pool – #52

You can remove your above-ground pool and repair your yard by yourself. It might take days plus a lot of time and work, so brace yourself. Prepare with proper tools and make sure you do it correctly, seeking local pool experts and asking questions never hurts!

1. Drain Water and Remove Pool

Make sure to drain out water from your pool correctly. You shouldnt just dump it anywhere, this amount of water sitting in your yard could sit there for days, plus it could cause serious or minor issues to your land. You might have seen people cutting/slitting their pool liners and this is a major no from me. The amount of water coming out can really hurt you and your property.

How we always drained our pool is by siphoning the water with a garden hose and aiming it towards a storm drain. These drains are found on the road, if you dont have one near your house, let the water run down the road until it reaches a storm drain. All public roads are supposed to be built so water will properly drain.

The downfall with this draining method is the time it takes. If a round pool is 20 feet or larger it can take up to 4 days. Increasing the number of garden hoses used will speed this up.

This isnt the only way you can drain your pool, there are faster methods. For example, a sump pump is a popular choice, this will pump water out at a much faster rate. The Utility Pump by Superior Pump is the most popular choice because it pumps 1800 gallons per hour and is extremely affordable.

  • Garden

Recommended Reading: How Do You Get Iron Out Of Pool Water

The First Step In Restoring Any Pool That Has Been Left Unattended Is Fishing Out As Much Debris As You Can Using A Pool Vacuum Or Your Skimmer Net

How to open an above ground pool that has been sitting. If the pool has been improperly installed on sloping ground, even the weight of the pool water itself can be enough to cause a collapse. Take a look at the pool construction. If you have an air relief valve on your filter, make sure to open it to bleed the air from the system.

See more ideas about backyard, pool, swimming pools. Once the pool is opened and the floor and walls have been brushed the first chemical you should add is chlorine to shock it. Once water spurts out, close the air relief valve.

This includes priming the pump and turning on the circulation and filtration system. It is an above ground pool which had been in service for about 15 years and had needed a new liner the last time it had been running. Drain out the rest of the water in preperation for replacement.

The rectangular pool is incorporated into the deck perfectly. If the pool has been sitting for two years, if it has a sand filter get a sand change done. Using a skimmer net on a pole you should be able to fish out most of what is in the water, even if you can’t see what you are doing.

If the water is murky, it may be hard to find the. Frames are usually constructed from corrugated sheet metal, and while it’s strong, sheet metal can’t always withstand the extra weight of several inches of melting snow and/or ice. Turn your pool equipment back on.

Pin by Ovaja on Luxusleben Small pools backyard

- Advertisment -

Most Popular

- Advertisment -