Friday, November 25, 2022
HomeGroundHow To Vacuum Inground Pool

How To Vacuum Inground Pool

- Advertisment -

Preparing The Necessary Tools

How to vacuum an Inground Pool Video

First things first: prepare all the tools you need at hand to save time. You will need the following:

  • Vacuum head Any vacuum head will do, as they are universal. However, you will need to consider the material of the pools surface as certain head types are best for vinyl or others. It is also recommended to use a weighted one so it wont float around when vacuuming the pool.
  • Telescoping pole Most telescoping poles are also universal and connect to pool any pool skimmers. Just make sure to use one that is long enough to reach the deepest part of the pool.
  • Vacuum hose Universal vacuum hoses can be connected to any system, but see to it that yours can reach every part of the pool.
  • Vacuum plate or Skim vac A skim vac is essential as it allows you to use the skimmer basket rather than the pump strainer. This way, you wont need to turn your pool pump on and off.

Do You Remove Skimmer Basket While Vacuuming Pool

by Team Teserra | Nov 25, 2019 | Swimming Pool Maintenance

Your pool can become a home to algae and dirt fast if regular maintenance is not implemented. There are several ways to maintain your clean and good-looking pool, but the most common way is to use either a manual pool vacuum or an automatic cleaner. Many questions arise as to how proper pool cleaning or vacuuming is done; for instance, do you remove skimmer basket while vacuuming pool or do you let it sit in place during the process?

S To Follow To Make The Garden Hose Pool Vacuum

Now that you have a thorough idea of the four necessary tools to create a pool vacuum using a garden hose lets see how to connect the devices. The process includes:

Step 1: Attach the vacuum bag

When you have picked the right garden hose for the purpose, at first, pick one end of the tubing and attach the vacuum bag with it. It would help if you connected the vacuum bag correctly.

Observe both ends of the gardening tube, and identify which end has a valve attached to it. Connect the vacuum bag with the valve end to create the right suction pressure.

Step 2: Securely connect the telescopic pole

Firstly, find the handle of the leaf skimmer and remove the hold of the telescopic pole from the leaf skimmer. Then attach the stick with your garden hose.

When it comes to effectively removing the handle from the telescopic leaf skimmer, you usually get two methods for it. These are:

  • If the handle has a two pins attachment, apply pressure to disorganize the pins attached to remove the handle.
  • In the most standard cases, you can disorganize the skimmer and the pole only by twisting the leaf skimmer portion.

Once you have removed the leaf skimmer from the telescopic pole, you need to identify the vacuum pool hole in the garden hose. Then attach the telescopic pole with the lately found hole. Sometimes you find it challenging to connect the garden hose and telescopic pole.

If such is the case, we recommend you use a knot and tie both tools.

Read Also: How To Test For Iron In Pool Water

How To Use A Pool Vacuum In An Inground Pool

Inground swimming pools are an investment, and they require special care and cleaning to maintain the structure and keep the water clean. Learn how to vacuum an inground pool using the right techniques.

  • Telescoping pole

If you have an inground swimming pool, here is how to use a pool vacuum. Start at the shallow end of the pool and make your way to the deep end to allow the telescopic pole to extend as you vacuum the pool bottom.

Vacuum the floor with slow sweeping strokes to prevent stirring up debris and overlap strokes to avoid missing sections.

Continue vacuuming the floor as you make your way to the deep end of the pool, and keep your eye on the filter pressure gauge as you clean. If the pressure begins to rise, its time to perform a backwash.

After Vacuuming Your Inground Pool

Best Inground Pool Cleaners Review 2020

When you are done vacuuming, lift the hose into the center of the pool, allowing the pump continue drawing water through the hose to get any loose debris still in the hose. Then release the hose from the skimmer and place that end of the hose back into the pool and pull the vacuum head out of the water and let the water drain out back into the pool.; Adjust the intake valves to their original position and move on to Plaster Care. Looking for more pool maintenance tips? Checkout our blog on a pool cleaning checklist.

Contact Us

  • Are you interested in a spa?*
  • Yes
  • You May Like: How To Take Calcium Off Pool Tile

    Why It’s Worth Investing In An Automatic Cleaner

    You might be thinking that a good filtration system is all you need, and believe me, its important!

    It will minimize algae and help you maintain normal PH levels, making your maintenance a little less time-consuming.

    But even the best filters cant do all the work.

    To keep your pool sparkling-clean and clear, you’ll need to use an extra cleaning method at least once a week.After a few weeks of manually scrubbing and vacuuming your pool, you’ll probably agree that an automatic pool cleaner is a worthy investment to free up your time and energy.

    Abc Can Keep Your Pool Clean And Ready For Swimming

    If you wonder if something is amiss with your pool, your best bet is to work with a pool expert who can save you time and make any needed repairs, getting the job done right the first time. The skilled technicians at ABC Home & Commercial Services perform this type of work day in and day out. As a full-service provider, ABC can help with anything from regular cleanings to water testing to routine maintenance. With ABCs help, you can spend your weekends swimmng, rather than working on your pool.

    Recommended Reading: Is The Mandalay Bay Pool Open

    How To Vacuum Your Pool

    The following are generic vacuuming instructions that will work for most pools. As always, see your owner’s manual, ask your installer, and/or speak to the manufacturer for complete instructions for your particular pool:

    1. If your pool has dual skimmers and/or a main drain, reduce the water flow to the skimmer/s and/or drain you are not using.

    2. Attach the vacuum hose to the vacuum head which is attached to your telescopic pole.

    3. Fill the hose with water. In one hand you should be holding the telescopic pole with the vacuum hose and vacuum brush attached. Make sure you hold the brush under water. In the other hand should be the end of the vacuum hose and you can hold it in front of the pool return wall fitting. As the hose fills up with water, you will start to see a lot of bubbles. When the bubbles stop, the hose is full.

    5. Vacuum the pool. Be sure to keep an eye on your pressure gauge or flow of water back into the pool. If pressure increases or flow decreases you will need to disconnect the hose and backwash before continuing.

    6. Make sure you keep the vacuum brush under water.

    7. When you are finished, turn the pump off and remove the vacuum hose from the skimmer. This will release the pressure from the hose.

    8. Backwash the filter according to the manufacturer’s instructions.

    Pool Circulation Problems Skimmers And More

    How To: Vacuum Your In-Ground Swimming Pool

    Maintaining crystal clear water requires several things on the part of a pool owner: the proper chemical balance, maintaining effective circulation in the pool and routine cleaning and maintenance.

    Maintaining adequate circulation is a multitiered process that involves much more than simply ensuring that the skimmer weirs are open. It includes many other things, like identifying and cleaning dead spots, optimizing the angle and placement of returns, appropriately sizing the pool pump and effectively and expertly addressing a number of issues that might arise from the many different pool components.

    You May Like: How Much Does It Cost To Resurface Your Pool

    How To Vacuum To Waste A Pool:

  • Fill the pool before beginning, and run the hose while vacuuming.
  • Shut off pump and switch the multiport valve to the Drain to Waste Position.
  • Vacuum as fast as possible, the water level can drop fast.
  • Stop vacuuming when the skimmer begins to suck air, allow the pool to refill.
  • Move the backwash hose frequently to avoid erosion and oversaturation.
  • How To Vacuum Your Pool Manually

    Were not gonna lie. Youre in for quite a workout if youre going to vacuum your pool by hand. And its going to take some time, too, so dont make any other plans for the afternoon.

    Start at the shallow end and slowly move toward the deep end of the pool. Use long, slow, sweeping strokes to clean. Make sure your strokes overlap slightly to avoid leaving any debris behind.

    Not to belabor the point, but this is no time to go for the world pool cleaning speed record. As the Beastie Boys might say, slow and low is the tempo. Rushing will just kick up debris, which will reduce visibility and take hours to settle down again, leaving you on the hook for another super-fun session of vacuuming your pool.

    If youve got a load of debris, youll likely kick up a cloud no matter how careful you are, but theres no need to make more work for yourself by hurrying.

    If the water does become cloudy, give it a couple of hours to resettle, then come back and vacuum again, repeating as necessary.

    If the vac head becomes stuck, switch off the pump for a second to break the vacuum force and set it free. Also, be sure to monitor your pool filters pressure gauge as you vacuum. If the pressure rises above the levels recommended by the manufacturer, take a break, and backwash your filter.

    Also Check: Can You Swim With Tampon In Pool

    Disconnect Change Filter Settings And Do A Final Cleanup

    Once your pool is vacuumed to your satisfaction, you can disconnect your vacuum head and hoses. Make sure to clear out the bottom of the skimmer, too. If you changed your filter pump settings, make sure to change them back . For a finishing touch, attach a brush to your telescoping pole and give the pool floor and sides a good scrubbing.

    Pro tip: To ensure that your pool water remains balanced, test your water after you vacuum your pool.

    What To Do After Using The Pool Vacuum

    Best Electric Handheld Inground Pool Vacuum

    You use the vacuum to clean and maintain the pool, but what about the vacuum itself? Here is what to do after vacuuming the pool and how to disassemble the vacuum and clean it for proper storage.

    • Telescoping pole

    Once you finish vacuuming the pool, remove the telescoping pole from the vacuum head and drain all the water out of the hose.

    Screw the pole on a cleaning brush and scrub the dirt from the pool sides with the filter pump running. Inspect the water level and top it off with a garden hose if necessary. Finish by cleaning the pump filter or performing a backwash.

    Also Check: Aria Cabana Prices

    Which Pool Vacuuming Process Is Better

    Earlier, people even cleaned their pools by hand. Yes, you read right! People cleaned their swimming pools by hand with basic tools without using a manual or automatic pool vacuum. This goes without saying that the practice of cleaning your pool by hand is not thorough or hygienic at all. You can do this, but thats hopefully not what you wanted to learn about how to vacuum a pool!

    Manual and automatic pool vacuums remain to be favorable pool vacuuming options. Both are good options therefore, your choice depends on your needs. Manual vacuuming is of course better than cleaning by hand however, you still engage in manual labor.

    Its similar to the process of vacuuming your home however, it is slower than using household vacuums. Yet, manual pool vacuums are the cheapest effective method of cleaning your pool. So if you are on a budget, but still want a thorough method to clean your pool, manual vacuums are an excellent option.

    The more expensive automatic pool vacuums are an excellent option if you have extra cash to spare. Their most prized feature is their time saving and efficient design. If you are on a time constraint schedule and dont want to waste time or effort cleaning your pool, you should go for automatic pool vacuums.

    Cleaning The Pump Filter Cartridge After Vacuuming

    After you finish vacuuming your pool, you need to clean a pool filter cartridge. The pump sucks dirt from the pool water, and large bits of debris often clog the filter, causing the system not to operate properly.

    • Spray nozzle

    Turn off the pool pump and then remove air from the unit by slowly opening the valve located on the filter top. Take off the clamp holding the filter in place, and slide out the filter.

    Attach a nozzle sprayer to the garden hose and spray water between the filter pleats by moving from the top of the filter downward to flush out debris. Continue cleaning in this manner as you make your way around the entire filter.

    After the filter is clean, return it to the pump, replace the top, and clamp it in place. Turn the system back on with the relief valve still open. Close the valve once a steady stream of water appears.

    Read Also: Chlorine Kills Lice

    Set The Filter To Waste

    When you have a large amount of dirt at the bottom of the pool, you want to ensure that all of it is cleaned out. If you have the filter set on Filter, then the dirt the vacuum sucks up will circle back into the pool. That undoes all the work you just did, so change the setting to waste so that it takes the dirt to the sewer line directly.;

    How Does An Inground Pool Vacuum Work

    Inground Swimming Pools: How to vacuum an inground pool.

    Theres no doubt that having your own inground pool will provide you with plenty of convenient relaxation, exercise, and amusement during the warmer months. But unfortunately, having a swimming pool isnt all fun and games. There are many responsibilities that are also associated with owning a pool. And one of the biggest responsibilities is keeping the water clean. This requires a multi-step approach that includes keeping the water chemistry balanced, removing fine particulates with a water filtration system, trapping larger debris in the skimmer system, and cleaning the pool walls and floors through the use of scrub brushes and vacuum cleaners. In this article, were going to concentrate on the vacuuming portion of water quality control.; How does an inground pool vacuum work? Read on to find out.

    You May Like: Vegas Hotel With Best Pool

    How To Manually Vacuum Your Pool

    In reality, manually vacuuming your pool is a workout and required some muscle work. Additionally, the task can be time-consuming, therefore, clear your schedule for a couple of hours on the day you want to clean your pool.

    As you start to vacuum, work your way from the shallow end towards the deep end. Move your pole in long and slow sweeping strokes, making sure they overlap to clear all the debris out. Making slow cleaning strokes is very important because it ensures you thoroughly pick up all the debris.

    Making fast and rushed strokes will quickly distort the water and affect visibility. You will then have to stop and wait for a couple of hours before the water settles to achieve visibility again.

    When you are cleaning your pool, there are times when the vacuum head will get stuck. To fix this problem, shut off the pump to break the vacuum force so the vacuum head can be free. Then, you can restart the pump and continue cleaning. Additionally, during your cleaning, if the pressure of the filter rises too high, stop the cleaning, backwash the filter and then resume the cleaning.

    After vacuuming your pool, remove the vacuum head from the pole and drain water that is left in the vacuum hose. Then, attach the cleaning brush to the pool and begin to scrub off algae, dirt, scum, and debris on the sides of the pool.

    Types Of Automatic Cleaners

    Depending upon your budget and requirements, you can select an automatic cleaner.

    They are of 3 different types and we would be discussing each one of them in a while to help you in narrowing down on the options and thus helping you in buying a value for money product.

    Robotic Cleaner

    Frankly speaking, there has been a surge in the demand for an automatic robotic cleaner because of the power-packed superlative features that it comes with.

    Ive been using it for quite a few years now, and trust me, its worth the investment.

    Other than the high cost, youll not find any drawback, particularly with this robotic cleaner.

    To be honest, if youre an owner of a small pool then definitely, you dont need a robotic cleaner.

    On the other hand, if you own a large pool that comprises hard-to-reach areas then I would definitely suggest you should opt for a robotic cleaner that comes with remote control.

    Suction-Side Cleaner

    As the name suggests, a suction side cleaner is attached to your pool filter to create suction.

    Well, its an expensive option and you should only use it if your pool is full of dust and debris.

    Pressure-Side Cleaner

    It is attached to the return hose on your pool filter for suction and also comprises a collection bag.

    Some of you might find this process tedious and time-consuming as you need to replace the collection bag too often.

    But, at the same time, you need to understand that they do reduce wear and tear on your pools filter by collecting their own debris.

    Recommended Reading: Above Ground Pool With Deck Prices

    RELATED ARTICLES
    - Advertisment -

    Most Popular

    - Advertisment -