Monday, June 10, 2024
HomeMust ReadDo It Yourself Concrete Pool

Do It Yourself Concrete Pool

- Advertisment -

Types Of Structures For Swimming Pools

Vlog How hard can it be to paint a concrete pool yourself with Luxapool epoxy paint? DIY to save $$$

There are two types of structures: concrete formwork and shotcrete concrete. The formwork structure must be built in two parts, first the floor and then the walls. With this, we leave a junction of the concrete of the soil with that of the walls, and thats where the water can go. The gunite structure is constructed in one piece and without any joints.

The concrete and thickness

It must be of quality and well prepared. It is important that all processes and materials are adequate for the best result. Ideally, it should be supplied by a company specialized in concrete. We built pools with shotcrete of selected aggregates and H-400.

Thicker more years of life. Pools with 10-15 cm thick structures have lasted between 10 and 20 years. Structures of 20-30 cm thick come lasting between 20 and 30 years and 35-50 cm thick they last between 35 and 45 years. From that time, they suffer small fissures that eventually become cracks. Up to sizes of 5m x 10m we use thicknesses of 25cm on the floor and 22cm on walls.

The iron grid

It must reinforce the concrete of the structure. We work in swimming pools up to sizes of 5m x 10m with a double electro-welded mesh of 8 mm over the entire surface, reinforcements with 10 mm bars at all corners and walls every 50 cm. With this, we get a very resistant skeleton. For larger pools. We must use other thicknesses and reinforcements.

Your City Might Require It

Depending on where you live, the building codes in your city might require you to work with a professional contractor when installing a pool on your property. This isnt true for all cities, but it is an important thing to check when youre thinking about DIYing your pool.

You might not have another choice but to hire a professional contractor.

Diy Inground Pools: Costs Types And Problems To Consider

Fiberglass Pool Information | Installation & Construction | DIY Fiberglass Pools | Cost and Pricing | Swimming Pool FAQs | Concrete Pool Information | Vinyl Liner Pool Information

So youre up for a home improvement project, only this time youre taking on something big…you want to build your own swimming pool.

And thats awesome. We know how rewarding it can be to complete a project and benefit from it for years.

It might fill you with a sense of pride to do things on your own and to do a good job, or you might just want to save some money.

Swimming pools can be tricky though, and mistakes can be costly. So, how will you know if a DIY inground pool is a good idea or if youve undertaken too much?

At River Pools, weve been manufacturing and installing inground fiberglass pools for years, and we know the ins and outs of pool installation. However, our main goal is to educate you on all things swimming pools, and if youre interested in a DIY inground pool, we want to make sure that you have all of the facts before taking that first step.

In this article, well break down the basics of how to DIY the different types of inground pools, the things youll need, and the costs, problems, and challenges you may face along the way.

Lets start by looking at the three main inground pool types and what it means to do a self-installation.

Don’t Miss: Where To Buy Pool Pump Capacitor

Concrete Pool Deck Repair Do It Yourself

Pool deck resurfacing with concrete coatings the network pool deck resurfacing with concrete coatings the network how to resurface your concrete pool deck and bring a renewed sense pool deck resurfacing with concrete coatings the network pool deck repair resurfacing in orlando fl.

Colored concrete pool deck ideas is resurfacing an how to pool deck complete remodel concrete overlays coming pool deck resurfacing with concrete coatings the network rubber pool deck surfacing do it yourself you pool deck resurfacing with concrete coatings the network do it yourself concrete pool deck resurfacing mycoffeepot org.

Plumb And Wire The Pool

How to Resurface Your Concrete Pool Deck and Bring a ...

Lay down your plumbing pipes for your pools circulation system . Every pool is different, so be sure to follow your design and your concrete pool plans.

You must cap the openings so that you dont clog the pipes with concrete in the next step. Hook up the plumbing to the pump and filter system, and get a pool plumber to help you or to at least verify that everything is done correctly. You dont want to realize that you made a mistake after everything is covered in concrete.

Wire the electrical parts of the pool, like the filtration system, lights, and anything else that needs to be hooked up to a power source. Also, make sure the pool is bonded properly before going forward.

#1 Tip: Get an experienced pool plumber to oversee or at least double-check your work.

You May Like: How To Take Calcium Off Pool Tile

Prepare For Planting Around Your Natural Pool

Once your pool is constructed, you’ll need to prepare the plant zone with 3 to 6 inches of soil. Choose your soil with care as soil can carry various contaminants. Avoid harvesting soil from areas where animal excrement is prevalent, such as in dog runs or from grazing areas. Select soil that’s free of organic matter, which would rot underwater. You can have a lab test soil samples for potentially pathogenic bacteria. To find a laboratory in your area, contact your state’s health department. once soil, gravel and hardware are in place, you can fill the pool. Disturb the soil as little as possible and let the pool rest for a week before installing plants. During this time, you can test your hardware to make sure it works.

When Scheduling Work Make Sure Everyone Is Clear On Exactly What Is To Be Done And What Materials They Are Bringing

When the hole was dug, it was the plumbers turn. The fact that the plumber worked for the same company as the excavator should have been our first clue that this wouldnt go well. He said we were supposed to provide certain materials for them to do their job, which we found is not normally the case. We learned that its pretty important to make sure that everyone is on the same page.

Don’t Miss: How To Vacuum Intex Above Ground Pool

Building An Inground Swimming From Scratch

Here is another in-ground swimming pool that you can build from scratch, no pool kit used, so get ready to get your hands dirty. You’ll first sketch how you want the pool to look before digging the designated area.

You’ll need a small road construction equipment/tractor to properly give the edges of the pool hole a definite square shape. The rest of the making process is challenging, but with other hands to assist you, it’ll get easier.

Do It Yourself Concrete Pool Deck Resurfacing

Rubber Pool Deck Surfacing – Do It Yourself

Do it yourself concrete pool deck resurfacing mycoffeepot org decorative concrete pool deck resurfacing philadelpha pa how to resurface pool deck driveway or patio part 4 you pool deck resurfacing with concrete coatings the network pool deck resurfacing with concrete coatings the network.

How to resurface your concrete pool deck and bring a renewed sense resurfacing a concrete pool deck sakrete do it yourself concrete pool deck resurfacing mycoffeepot org pool deck resurfacing with concrete coatings the network pool deck resurfacing before and after pictures how to resurface a concrete pool deck patio resurfacing.

Also Check: Does Costco Sell Pool Chlorine

The Necessary Prerequisites To Make Your Own Diy Inground Pool

Thats it: we found the perfect location for our pool in the garden, and were ready to start construction. But before getting down to work on the job, it is essential to be in order from an administrative point of view.

A building permit is required if we have decided to build a swimming pool inside our house. Or if our outdoor pool has a large shelter.

As the administrative response can take more or less time, you dont hesitate to do it long in advance.

Cheap And Simple Inground Swimming Pool

If you buy one from a professional pool company, an inground swimming pool will easily cost you about $10,000 or more. You can build your own, and one that looks just like it was professionally designed, for less than $3,000. Imagine what you can do with that extra $7,000! This one is really simple. Once you get the hole dug, you just follow the easy steps to finishing your pool and you end up with something that looks like you paid tens of thousands of dollars to have it installed.

Read Also: How To Hide Pool Equipment

How To Make A Concrete Pool Deck

  • Written by Justin Stewart on Oct 03, 2009To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience.Reviewed by

Concrete pool decks are generally used for in-ground pools or ones that are dug out of the ground and installed below ground level. They only need maintenance every so often, unlike wood decks. Building one for your in-ground pool can not only be rewarding but can a lot of fun with your pool and outdoor entertainment area.

Step 1 Measure Deck Area

Whether youre building a new concrete deck or covering your old one, you need to take measurements so you can determine how much concrete you need. Measure first the perimeter of the pool. This is your inside boundary.

Next, measure the outside perimeter youve decided upon when you had your pool installed in the first place.

Also, decide how thick you want the concrete. About 5 or 6 inches is ideal. Buy your concrete accordingly.

Step 2 Lay the Frame

Now that you have your measurements determined and your supplies all in one place, you can begin laying the frame for the concrete you will be pouring. Make sure youve made planned breaks in your framethat is, spots where the concrete doesnt quite meet up with other concrete, like sidewalks.

Step 3 Pour Sand and Concrete

Repeat this process until you have all the concrete poured in your frame.

Step 4 Finish Concrete

What Are Some Common Challenges Associated With Do

Inground Concrete Swimming Pool Cost and Price Guide 2020

The most common challenge associated with DIY fiberglass pool installations is getting the pool level.

For a first timer, this can be a frustrating experience. The key is to stick with it until you get it right.

One word of advice here: be careful to give yourself plenty of time for pool leveling.

If you’re having water delivered, build in a couple extra hours before they arrive and budget some extra time for the crane to sit on site while you work on getting the pool level.

Few things are more stressful than re-setting a pool over and over while everyone’s standing around waiting on you.

These situations can lead you to compromise and settle for a pool that’s not as level as you would like. Don’t do it. You’ll kick yourself later.

Another common challenge with straight-wall pools is keeping those suckers straight. This requires constant monitoring while filling the pool and placing backfill.

As soon as you set the pool, run a string line from corner to corner and keep it spot on until the pool is full.

If the wall bows in or out, the pool will probably be fine, but you’ll have to do some digging to get it straight again.

Please leave any questions you may have about installing your own fiberglass pool below, and I’ll do my best to answer them promptly.

Thanks and good luck!

Read Also: Does Costco Carry Pool Supplies

Try To Be Flexible With Design Ideas And Options

You may have an idea in your head of the ultimate dream pool, but try to be open to change. There are tons of options for pools that you may not know about and when youre spending a large amount of money, you want to make sure youre happy with it. There were a few things during the construction process that we were really unsure about, but in the end it all came out beautifully.

Dont Be Afraid To Fire A Contractor After Theyve Started Working

The plumber had barely gotten started on his work when our pool consultant called the company and fired him. He wasnt happy with the guy trying to charge more for little details and telling us we needed to provide some of the supplies. We ended up using another plumber who not only supplied the materials the other company didnt, but he was also cheaper and did much better work!

Read Also: Vdara Pool Las Vegas

What Does It Cost To Resurface A Pool Deck

Pool Deck Resurfacing

A basic resurfacing job of 750-square-foot pool deck ranges in price from $2,250 to $3,750. A decorative overlay would be about $5,250 to $9,000 while stamped concrete may range from $6,000 to $15,000.

How do you resurface a pool deck?

Likewise, how do you resurface a pool deck? How to resurface a pool deck

  • Prepare & Repair. Etch, grind, or shot blast the concrete surface to make it porous.
  • Clean & Prime. Pressure wash and let surface thoroughly dry.
  • Mix Product.
  • what is the best pool deck coating?The Best Pool Deck Paint

    Diy Inground Concrete Pools

    HomeBuilt DIY Concrete Block Swimming Pool

    A concrete pool is among the trickiest to do on your own because youre going to have to build it from the ground up. With concrete, you wont have the pool shell or the pool kit to take care of a lot of the work for you.

    Most people who build their own concrete pools are contractors or otherwise have some experience with construction or engineering.

    Some people opt for a very simple concrete pool using basic materials like cinderblock and epoxy paint. These are basically makeshift pools and wont turn out like the concrete pools that we traditionally see in homes and magazines.

    Since concrete pools are made with shotcrete or gunite , most people won’t build them on their own. If youre inexperienced and set on getting a concrete swimming pool, youll find that its worth the money to pay for a professional builder to do it for you.

    If you really want to DIY your concrete pool to save money , its best to DIY parts of the project and leave the rest up to a professional builder for the best results. For example, you can do the excavation and patio and let the builder cover the rest.

    Again, you can save some money, but theres no going around the work that needs to be done in order to get a pool in the ground.

    Youre going to need a lot of equipment and a lot of help for your DIY pool. While you can spend a few thousand dollars making a basic cinderblock swimming pool, it probably won’t last you as long as a professionally constructed pool would.

    Read Also: Vdara Escape Cabana

    Concrete Pool Construction: Planning Guide

    When it comes to installing a pool in the backyard, most people prefer a concrete pool construction. This kind of a pool is generally in ground and is structurally the strongest. It is robust and long lasting, which makes it a great investment. The reason they are so strong is because they are mostly made from shotcrete and gunite.

    Concrete inground swimming pools that have been custom designed are the most popular ones as they offer many superior features to other kinds of swimming pools. These are also easier to update or remodel when they become old. A simple resurfacing of this kind of pool is enough to make them look brand new again. There are a number of things to consider while installing a concrete swimming pool in your home. Here are some important tips that you can use:

    Work with a professional contractor

    The most important thing to remember when you plan on installing a concrete swimming pool in your backyard is to hire a professional contractor. Doing this will ensure that you are aware of every detail and this can help eliminate unexpected costs and frustration during the building process.

    The design and size

    Excavating and laying foundations

    Piping and earthwork

    Building Your Own Pool Is Possible Read These Tips To Learn How You Can Build Your Own Pool And Save Thousands In The Process

    Believe it or not, you CAN build your own swimming pool. Having a pool was never on our radar however, we decided a couple of years ago that maybe we could entertain the idea. The problem was that we were hit with severe sticker shock when we met with a few of the big pool companies and got quotes. A few friends had subbed out their own pools and hearing the numbers they paid, it made that route so much more enticing and we decided to go for it. Today Im going to break the whole process down for you and share what we learned, saved, and whether or not Id recommend it. Ill forewarn you that this post is a little long, but theres a lot of information that I think can be really valuable for anyone else thinking of doing this.

    With so many requests for the contractors we used, Ive included the document with the contact information. Please keep in mind that these contractors are local only to Arizona.

    Don’t Miss: Acid Wash Concrete Pool

    Diy Concrete Swimming Pool

    Building your own pool is not for everyone, but it can be done, with great results. When I got bids around $30,000 , the choice was to build it myself, or forget it.

    For around $7000, and a lot of work, my son and I built a very solid 13′ x 22′ x5′ oval concrete pool off our deck.

    We built it on flat ground , but it could also be built in a hole and backfilled.

    Keeping the plumbing simple also cut costs.

    Block pools can have problems because they lacks the steel needed.

    We used lintel block to wrap rebar around the pool every 8 inches horizontally.

    Stacking the blocks with cores lined up put a rebar vertically every 8 inches.

    We cut the sides out of the base row of block to let rebar and concrete connect the wall and pool floor.

    The result was a pool that could stay solid on the 3 ft. of rock backfill behind our retaining wall.

    We plastered and waterproofed the pool ourselves with white surface bonding cement, and 2 years later hired a pro crew to do a finish coat of prettier blue cement plaster.

    - Advertisment -

    Most Popular

    - Advertisment -