Pool Toy Storage For Summer
Having adequate storage space for your pool toys is important as a swimming pool owner. If you live in an area that experiences rain, wind, and other harsh weather during the summer months, you will want to ensure that your pool toys dont fly away or get damaged. After cleaning your pool toys, try to store them in an enclosed, dry space until the next use.
Make A Floating Toy Box
Try cutting up one of your pool noodles and wrapping the pieces around a cheap laundry basket. Do this and the basket will float in the pool.
You obviously need to get a box or basket thats waterproof, and youll find yourself adding a new feature to your swimming pool while saving yourself time on cleaning up.
The best part? This hack only take a few minutes and a cheap noodle and basket to pull off!
So What Is The Best Method For Cleaning Boat Canvas
Using a pressure washer is actually the best way to clean and prevent mold reccurrence. However, you can try using other available options. This includes using a boat vacuum to remove any dust and gunk out from the covers by placing it on the floor. If you still see larger dust particles, you can use a broom to move it up a little bit then vacuum it again. Use a clean bucket of warm water and a mild soap solution to scrub it.
Once the dirt has been scrubbed away, spray it using a garden hose or pressure wash to remove the gallon of cleaning mix youve used. Lastly, dry it under the sun and have it air-dried by hanging it over your boat or over a clothesline.
Also Check: Where To Buy Pool Pump Capacitor
How To Remove Mold From Bricks
Mold will spread if it is not cleaned off bricks. It can spread to neighboring surfaces, widening more and more with each passing season. Or, mold spores can float away and land on other surfaces. When the right elements arise, or rather when the area becomes moist, the mold will grow. Thankfully, its easier than often assumed to remove mold from your bricks.
Materials You Will Need:
- Weed killer or Mold and mildew stain remover
Can You Clean A Bimini In A Swimming Pool
If your bimini is as big as your pool, then the answer is a YES! You can actually have your covers cleaned. Just soak it up overnight in the pool. Then simply rinse it the next day. If youre too worried to do this, you can try to remove the mold to clean mildew stain by just using the spray and soap method.
Also Check: Pool Waterline Cleaner
Using Baking Soda Solution
Here is another simple technique that involves the use of common ingredients present in your home. Follow the below mentioned steps for it.
Step 1: Start the process by mixing warm water with one-fourth of baking soda. Using baking soda will help you clean the dirt stains from the float naturally.
Step 2: Now, soak a sponge in the solution and start scrubbing over the surface of the float.
Step 3: Once you have adequately scrubbed, rinse the surface with water from a bucket or garden hose. If the floating unit is small, then it is recommended to soak the entire item in the solution for maximum cleaning effect. With the baking soda solution, you can remove the dirt stains, algae, and other pollutants off the surface of the float.
Step 4: After that, use a dry towel or cloth to remove the moisture from the surface of the item.
Step 5: Let it dry in an upright position in the natural air. Do not dry in direct sunlight as it can ruin the material of the floating unit.
Step 6: Your clean pool toy is ready to be used safely once again!
How Often Should You Clean Your Pool Toys And Accessories
We recommend cleaning foam toys, such as pool noodles, three to four times each swimming season, while inflatable and plastic toys can be treated as necessary. After your toys have been cleaned and hosed down, it is important to let them dry thoroughly before storing them away in an enclosed space. Left-over moisture can cause mold, mildew, and bacteria to grow.
Don’t Miss: How To Clean Tile Grout In Swimming Pool
Tips To Prevent Mold And Mildew On Patio Furniture
Eliminate Moisture: Make sure that there is a positive flow of air. If your patio furniture is placed inside a sunroom or enclosed space, you may want to get a dehumidifier or have a fan blow air out of the room to reduce the amount of moisture in the room.
Sunlight: Dark, damp, and humid conditions are the perfect breeding ground for mold and mildew. Move your furniture outside of the shade or lower your patio umbrella to allow more sunlight to reach your cushions. Nows the time to trim up that old tree that youve been meaning to get to!
Furniture Covers: If the furniture is placed under a cover, make sure your patio covers have vents and are made of breathable materials like these.
Teak: I wrote a guide on teak furniture here. You should look at this if you want to learn more specifics on mold and mildew as they relate to outdoor teak furniture.
Regular Care and Maintenance: The more often you clean your outdoor furniture, the more likely youll be able to prevent it from popping up again. I recommend light cleaning 3-4 times a year just to keep the cobwebs out.More Tips to Clean Outdoor Furniture:
Read Also: How To Find Out If You Have Mold Poisoning
Requisition A Coat Rack For Storing Pool Toys And Towels
Coat racks come in handy for more than just coats, hats, and umbrellas.
If you invest in a sturdy coat rack suitable for outdoor use, you can take full advantage of all those arms to hang up all your pool accessories and equipment when not being used.
A nice way to expand this storage solution further is to hang some mesh bags from the rack. These allow you to store everything from flip-flops and noodles through to pool toys. They also work well for any small items like diving rings. Placing toys in mesh bags also allows you to hose off the chlorine after use.
Don’t Miss: How Much Is Salt Water Pool
Tips For Cleaning Your Swimming Pool Toys & Floats
There is nothing better than a summer afternoon kicking back and relaxing with a pool noodle or inflatable lounger. Throughout the summer, your pool toys see plenty of use. While you know it is important to perform regular maintenance and cleaning on your pool, you might overlook the importance of cleaning your pool toys, floats, and accessories. With a little regular scrubbing, your friends and family can enjoy clean and safe pool toys all summer long.
What Can I Do To Keep Seagulls From Pooping On My Bimini Top
Seagulls are your worst enemy, aside from mildew and mold. Cleaning their waste can be disgusting, but there are a lot of methods that can be easily done to prevent seagulls from pestering your Bimini. This can save you a lot of time to wash as well as it can prolong the life of your boat covering. Try to set up parallel wirings on top of your boat. This will stop seagulls from coming to your vessel as they love to sit high. You can also have a net installed to keep them from coming anywhere close.
Recommended Reading: How To Lower Cya In Pool
How To Remove Mold And Mildew From Carpet
Be very careful dealing with mold, advises Dean Carter, a carpet-cleaning expert. Silk and wool carpet should always be professionally cleaned. Likewise, only a certified mold expert should remove any substantial amount of mold from carpet. However, if its a very small area, and its safe to use chlorine bleach on the carpet, you can try this.
How Do You Clean A Foam Pool Float
. Then, what can I use to clean my pool floats?
To clean your water toys, pour two cups of household bleach into one gallon of water and mix. Sponge the solution over your toys and scrub any grime off with a soft-bristled brush. Then, rinse down with the water hose. Completely air dry before storing or pat down with a towel for faster results.
Similarly, should you leave pool floats in the pool? Don’t leave your pool float in the pool overnight. The plastic or vinyl will break down over time due to the exposure to the pool chemicals, sunshine, and heat. If you are getting out of your pool, then take out the pool float.
Moreover, how do I get rid of mold in my pool float?
Bleach effectively removes germs, mold and mildew from your pool equipment. All you need to do is mix 1 tablespoon and 1 gallon of water, then brush it on the toy or float and let it sit there for a few minutes. Wipe it down and dry it completely.
How do you sanitize pool toys?
Fortunately, blow-up pool toys that are made of vinyl or plastic can be sanitized with a solution of 1 tablespoon Clorox® Regular Bleach2 per gallon of water. Wipe the bleach solution on, let stand 2 minutes, and then allow items to air dry .
You May Like: Does Costco Sell Pool Chlorine
Signs That Your Cushions Have Mold Or Mildew
Mold and mildew can grow anywhere, but it thrives in moist areas.
So if you live in a rainy or humid location, then its almost inevitable that your outdoor cushions will be subject to mold and mildew at some point.
If you neglect mold and mildew, it can spread to other areas through spores.
Below are some ways to identify mold and mildew:
- Mold usually appears as black or darker spots on your cushionsbut it can also look like yellow, blue, or green stains/discoloration.
- If theres something fuzzy or velvety growing on the cushions, its likely mold.
- If its fluffy or powdery and either white, gray, or yellow, its likely mildew.
- Mold usually has a musty, dirty smell.
- If youve ever forgotten to wash your bath towels for a week or two, you know how mildew smells.
Bottom lineif you suspect something funky is growing on your outdoor cushions, it doesnt matter if its mold, mildew, or just dirt, the following methods will get the job done.
Colors Shapes And Design
This is where it gets fun. Green mermaid tails, avocados, emojis, dolphins you name it and theres a pool float out there to match. You can color coordinate for your family or outdoor décor or simply pick a shape that goes with your hobbies. For instance, you can search for pool floats by themes, like fantasy or sci-fi, or patterns, like polka dots or stripes.
Also Check: Can Dogs Swim In Pools With Chlorine
How To Clean Pool Floats
Swimming in a pool in a hot summer is incomplete without beautiful pool floats and toys to accompany you and your family. You can find many types of alluring floats available in stores.
Undoubtedly, these products are enjoyable, but the task of cleaning and storing them after usage is daunting. Once you and your family has completed their enjoyable pool activities, the tedious work of cleaning these floats is necessary to avoid mildew and mold.
Thus, this guide has been prepared to ensure a systematic demonstration of proper cleaning and storage of your swimming pool floats. So, let us get started with this guide explaining how to clean pool floats.
How To Remove Extreme Mildew Stains From Plastic Furniture
Light to moderate mildew can be removed using the methods that weve already mentioned. However, some mildew stains will not budge without serious intervention. Heres how you can get rid of extreme staining:
Read Also: How To Tell If Pool Pump Capacitor Is Bad
Taking Care Of Your Garden Hose
- Avoid storing it under direct sunlight: UV rays from the sun can crack of rapture its exterior layer. Any water therein can also easily heat up thus damaging the inner tubing.
- Repair any leaks as soon as possible. This ensures that the water pressure from the hose nozzle is always at its optimal best.
- Dont cut the water on the nozzle but from the spigot. Relying on the nozzle to stop the water supply leads to water pressure build-up thus bursting your hose in a short-run.
- Avoid dragging it by the spray nozzle: Doing so weakens the connection between them thus causing leakages. A hose reel will go a long way towards preventing any kinks and tears.
Buying Guide For Best Pool Floats
Nothing says summer more than a pool, and nothing makes swimming more fun than a colorful pool float. As youve probably already realized, though, there are pool floats of every shape, size, and color. How do you pick just one ?
We’re here to guide you through the different types of pool floats, from those constructed of foam to fabric-covered models filled with beans. Many inflatables are perfect for one person while party floats can fit a number of friends. Youll have to decide the form and function that appeals to you and base your decision on not only what will be the most fun but also what you have room to store.
But rest assured, whether its an inflatable dragon or foam plank for lounging, theres a pool float out there for you.
Clear Pink Glitter Unicorn
Move over, giant flamingo, FUNBOYs Clear Pink Glitter Unicorn is trotting into the spotlight. This beautiful float is made with a clear translucent material tinted with millennial pink and comes with a reinforced cup holder to keep your drink-of-choice firmly in place. Filled with glitter for a wild metallic floating experience, who says unicorns dont exist?
How Do You Get Sticky Residue Off Vinyl
Recommended Reading: How Do You Get Iron Out Of Pool Water
Use Of Essential Oils
This method is best used for maintenance but can also be used for cleaning your garden hose. Luckily, essential oils such as tea tree can be bought from any organic food store. Tea tree can also be used as a natural disinfectant. The oils come at different prices, as expected. However, since so little is used, they are worth the buy.
- Add a few drops of essential oils to a clean piece of cloth.
- Use it to wipe the hose inside and outside of the hose to kill bacteria.
- Let the garden hose rest for about 10 minutes.
- Rinse it by passing running water through it for some minute.
We can have a clean garden hose without a clean nozzle. Therefore, we also have to know how to clean nozzles for us to have a totally clean garden hose.
Also Check: How To Treat Black Mold On Drywall