Saturday, May 7, 2022
HomeNewsHow To Replace Screen On Pool Enclosure

How To Replace Screen On Pool Enclosure

- Advertisment -

Pool Screen Enclosure Repair Costs

DIY How to install top panels on your pool enclosure

For minor damage in one panel or section, individual screen repair is economical. However, when replacing the fasteners or when the screening has reached its life expectancy , a full rescreening is often cheaper.

  • When replacing fasteners or repairing structural damage, the old screens have to be taken down, and it’s the same amount of labor to rescreen, just without the extra material costs.
  • If the mesh is 10+ years old, starts tearing, the color changes, and the coating wears away, these are common signs the screens are nearing its life expectancy and needs rescreening.

Average Pool Screen Enclosure Repair Cost

National Average Cost
Roof$50 $65

Contractors charge $30 to $60 per hour with minimum call-out fees of $100 to $200 for other minor repairs, such as replacing the spline, screws, anchors, fasteners, or cables, caulking and sealing the beams, or replacing any hardware.

How Long Does Pool Screening Last

This is largely dependent on the materials used both the quality of the screen and the type of screening. Phifer screening can have double the life span of the average screening, lasting up to 8 years. Phifer Glas-Shield can last up to 10-12 years. Beware of cheaply produced screens manufactured in China also referred to as Artisan Wire. They might seem like a deal, but their average lifespan is only 3-4 years.

Click here or call us at 261-0315 to schedule your free, no obligation estimate

GET A FREE ESTIMATE

Call us at 261-0315 or and schedule a free estimate today

Call us at or tap here and schedule a free estimate today

RECENT JOBS

Rescreen Pool & Patio Screen Enclosures & Repair

Rapid Rescreen and Repair always uses the best screening materials in the market. When you need screen replacement and repair, it is crucial to hire a professional. Our team specializes in rescreening pool and patio screen enclosure repairs. We always use the highest quality screen available which extends the life of your screened enclosure.

Restoring the pool and patio screen enclosures, gives your outdoor area a facelift. It makes your tired looking screened pool and patio look new again. Aside from aesthics, rescreening and repairing your pool and patio screen enclosures makes your outdoor area more functional and enjoyable. Holes, rips, and tears allow insects and debris into the pool and patio area, creating a nuisance. It is time to call a screen repair company. It is an investment in your home that truly adds value and functionality.

When is it time to replace old or worn out patio screen enclosures? As a general rule, a pool and patio screen enclosures usually last approximately 10 years. When the screen becomes worn, the vinyl coating begins to deteriorate and weaken.

Some of Our Services

Don’t Miss: How To Deter Wasps From Pool

How To Repair The Top Of The Pool Screen Enclosure

Whenever you invest in something, its only natural that you want to protect your assets. A pool enclosure, for instance, serves that purpose. But the product is always subject to damage, and if that happens, its necessary to fix it. But how to repair the top of the pool screen enclosure? Is that even an option?

Though some damage is irreparable and will require replacement of the panels, its possible to fix it in some cases. In todays article, we will help you identify what kind of loss is repairable and how you can proceed.

Additional Fees For Preparation

This is a 2 story Pool Screen Enclosure. John is replacing ...

When building a new swimming pool screen enclosure, the costs are not limited to only material and labor. Additional fees for a pool enclosure include

  • Permitting fees
  • Charges to prepare the site before the new enclosures installation
  • Cleanup fees

When so we revisit the question, How much does a swimming pool screen enclosure cost? As you can see, there are many components to building a swimming pool enclosure. An average overall cost in the central Florida area is between $7,000 and $10,000 to build a standard size pool enclosure.

To explore your options and discover how much your screened pool enclosure will cost, reach out to Dulando Screen & Awning. We deliver quality craftsmanship, excellent service and competitive pricing. From the creation of a design that fits your unique needs to the installation of a top-quality custom screen enclosure in your backyard, our team will cheerfully guide you through the entire process. Contact us today at 407-862-6060 to request a free in-home design consultation.

Don’t Miss: Pool Deck Cracks

North Brevards Quality Screen Enclosure

If you require pool and patio enclosure repair or enclosure cleaning, you might get our services also!We install clean and fix screen enclosures at reasonable rate and we provide comprehensive quote!Weve got professional technicians who could work magic to your possessions!

Your satisfaction is our priority and well provide you the very best screen enclosure support you deserve!

  • Screened-In Porch

Size & Height Of Pool Cage

The larger the enclosure, the lower the cost per square foot, but the higher the overall cost. The size of the enclosure depends on the size of your pool, deck, and seating area. A 12 x 24 pool with 3 sidewalk needs an 18 x 30 enclosure. A 6 deck area requires a 24 x 36 enclosure.

Enclosures need a height of at least 7 to 8 to walk or stand, which costs twice as much as a low enclosure that only covers the pool. Heights vary from one foot above the surface of the pool, up to two-stories tall.

Pool Enclosure Height Comparison

LowBase costSeals and covers the pool from snow, rainfall, and debris. Allows enough room to swim and ranges from 1 to 2 feet above the surface of the pool.
Medium1.5X baseReaches several feet above the ground with plenty of space to move around in and above the water level. Designed without obstructing views of the surrounding landscape.
High2.0X baseOne to two-stories high to match or extend higher than the home’s roof. Turns the pool area into an outdoor room for people to walk, sit, swim, and play.

Also Check: How To Patch An Above Ground Pool Wall

Why Choose Our Services

From window screens to pool enclosures to patio screens and more, if it has a screen we can repair, replace, or upgrade it to meet your needs. There are good reasons why our screen repair Stuart FL service is one you can trust.

Licensed, Insured, & Bonded: We are fully licensed to work in the Stuart FL area. This means that our company meets the standards as set by the county and state. Plus, if we should cause damage to your property, it will be covered by our insurance, so you do not have to pay a dime. We want you to be comfortable when calling us.

Trusted & Reputable: We understand that our reputation is only as good as the last customer we serve. That is why we offer a free quote for our services, so you know what to expect.

Let us be the company you call for the best in screen repair, replacement, and upgrade services. We are waiting for your call, so please contact us today.

No Way Are You Kidding Me Wheelie

DIY SCREEN REPAIR – REPLACING A RIPPED SCREEN on a Pool Enclosure Patio or Window

Get out your big wheeler its time to roll some spline and screen. I always make the guys cut the screen out on a nice smooth driveway. After they sweep it off, they have a big open space to cut screen without it having a chance to get all wrinkled up. They dont like it because they have to get out from under the shade of my ass and actually do some work in the sun, but I like it just because I think some of my helpers need a good tan and it helps keep the screen cuts nice and pretty.

Rolling a roof panel in is a lot different than rolling in a wall panel. With a wall panel, you roll in the top first, the sides next and then the bottom last so you can get the proper tension on the screen. Then you go back one last time and cut the excess screen away. But when youre on the roof, you dont have the luxury of going back over the same panel more than once. Youve got to work three sides at once and trim the materials as you go along.

The best way to keep a roof panel tight and right is to stretch the screen at a diagonal angle rather than horizontally or vertically. Where the two screen edges run parallel, keep the red-lined side of the screens factory edge directly in the center of the aluminum struts for reference. Pull the other side tight as you work your way along.

Recommended Reading: Pool Heater Btu

Pool Rescreening Cost Factors

Other factors that influence the overall cost to rescreen a pool or porch enclosure are:

  • Location Cities with a higher cost of living have local labor rates up to 50% higher.
  • Free-standing or attached lanai An attached lanai enclosure has one less wall to rescreen.
  • Size Larger and taller enclosures are more expensive to rescreen. A two-story enclosure requires scaffolding and costs 30% more.
  • Split Purlins A purlin is a roof-framing batten that makes rescreening more labor-intensive, as installers cannot put one sheet across the roof. They have to spline the tracks in each purlin instead. Charges are per section.
  • Beam Width The wider the width of the beams, the more dangerous the installation or repair job, especially on the roof.
  • Spline Spline holds the screens securely in place and costs $50 to $150 for the materials on an average pool cage. If the old spline is difficult to remove or is not easily accessible, and scaffolding is required, labor costs increase.
  • Roof Type Roof types such as gable, mansard, hipped, segmented, or lean-to take longer to rescreen and cost 10% to 20% more overall.
  • Fasteners The best time to replace the fasteners is during a rescreen, which saves $1,000. Replacing the rusty, corroded fasteners cost $2,400 on its own, or $1,400 when replaced during a rescreen. Rusty screws can weaken an enclosures structural integrity by up to 75%. Use ceramic- or nylon-headed fasteners that wont rust or fade.

Cost To Remove A Pool Enclosure

The average cost to remove a pool enclosure is $1.00 to $2.50 per square foot, or between $800 and $2,000, which includes cleanup and dump fees. Prices increase if the aluminum or steel is hurricane-rated, and if the support column fasteners need to be drilled out and holes filled.

Some companies quote lower prices if they can recycle the metal. Be sure to hire a professional to avoid pool tile breaking, or damage to the pump or heater.

Read Also: Does Chlorine Kill Lice

Glass Pool Enclosures Cost

Glass pool enclosures cost $30 to $65 per square foot or between $15,000 and $50,000 on average, depending on the size, type, and glass quality. Outdoor glass pool enclosures are all-season rooms that block pests and endure rain, snow, and harsh temperatures for year-round use.

Glass Pool Enclosures Cost

  • 200x stronger than glass. Plus, it’s lighter, more flexible, and insulates more efficiently.
  • Offers UV protection, and is chemical and weather-resistant
  • Withstand winds of 100 to 150 MPH and snow load between 25 and 70 PSF.
  • This synthetic glass is cheap and durable, but has short longevity. The panels undergo discoloration over time and can crack, chip, dent, and scratch easily unless its hard coated.
  • Polycarbonate panels are not sealed units, which can fill with dirt and water, causing fog and condensation build-up.

Formidable Customer Service & Urgent Timely Support

Fleming Island Pool Cage Screen Repair

When we make a commitment, its imperative that we honor it. This is a core principal within this company. Our employees are well trained and vetted as the top screen enclosure contractors in Tampa. On top of maintaining a customers appointment time, we also offer same day and emergency services. Contact us via our website, or call us directly to receive a quote!

You May Like: Green Pool Water From Iron

When It Is Time To Replace Old Or Worn Out Insect Screening

So, how do we determine when it is time to replace old or worn out screen material? As a general rule of thumb, a high quality insect screen last approximately 10 years. When the screen becomes worn, the vinyl coating begins to deteriorate and the fiberglass beneath is exposed. The high quality screen by Phifer® has a white fiberglass mesh that is visible as the vinyl erodes away.

We Use Only The Best Screening Materials Available

Breeze Enclosures Uses The Best Screening Materials

Phifer Pool And Patio Insect Screening

Its the best choice for patio and pool enclosures. It is a very durable, and long lasting, vinyl coated fiberglass mesh.

Examples of Breeze Enclosures Work

Is It Worth To Repair The Top Of The Pool Screen Enclosure

In some situations, yes, especially if the damage is not as visible and drastic. But, depending on the screens wear level, repairs may not be sufficient.

Ideally, examine and evaluate how degraded the top of the pool screen enclosure is. The greater the defects, the harder it will be to get around without making it look visibly bad.

In many cases, it will be better to simply replace the screens.

You May Like: What Hotel Has The Best Swimming Pool In Las Vegas

The Fasteners Are Rusty

If the screws and fasteners holding the screening to the frame of your enclosure are rusted and damaged, you can replace them, but combining a fastener replacement with weather-resistant screws plus a rescreen makes more sense. Replacing the fasteners and screening at the same time will save you an extra job down the road.

As pool season gets underway, inspect your pool enclosure for signs it needs rescreening. When the work is done, your pool area will feel fresh and renewed.

Damaged Pool Enclosure Should You Repair Or Replace

HOW TO REPLACE YOUR DAMAGED SCREEN PANEL WITH FLAT SPLINE

A pool enclosure is a great way to enjoy your swimming in the summer without having pesky mosquitos! You can swim every time of day, and never have fear about kids or pets falling into the water. With the usage of a pool enclosure, that fantasy becomes a reality! Based on the type of enclosure youve installed, a screen enclosure services Oviedo could offer a fantastic means to swim whatever the weather, provides protection from damaging sun rays, promotes security by preventing pets and kids from falling into the water, and also makes it much easier to keep the pool.

Also Check: When Does The Ymca Outdoor Pool Open

Aluminum Screen Enclosures: Wind And Weather Durability

Since the screen panels are large, Strong wind doesn’t cast much strain on the aluminum structure frame. If the frame has been secured and anchored properly, it will take a lot of wind before any damage or failure occurs.

In the event of a major hurricane, there is a high possibility of severe damage to the enclosure. A strong tornado could easily destroy it.

Screens will need replacing occasionally from rips or tears in the screens or evaporating pool chemicals, causing the screen material to become brittle and tear. The pre-painted aluminum usually lasts for years before needing to be re-painted.

Things Every Consumer Needs To Know About Getting Their Pool Enclosure Rescreened

All pool enclosures will eventually need to be rescreened, whether the screens lifespan is 20 years or just 3. Weak or discolored screens detract from your homes value and usefulness without giving you anything valuable in return. Screens can become torn and damaged to the point that they no longer serve any purpose at all. As a pool enclosure specialist once put it, A screen with tears is like a boat with holes in the bottom.

Replacing the screen yourself is out of the question. Rescreening requires specialized knowledge and skills. At the same time, learning about the rescreening process can help you make better decisions when its time to have the job done. Here are 6 things you need to know about pool enclosure rescreening.

  • The right screen makes all the difference

    When you request bids for your pool enclosure, you may get a wide range of prices. Its always tempting to choose a low bid. Yet, the difference in bids may have more to do with the quality of screen thats being used than it does with someone giving you a great deal. To be sure your new screen is worth the time and effort, you should stay away from cheap Artisan screen. Instead, choose Phifer screen or better.

    Polyester screen is stronger than Artisan screen or even Phifer fiberglass screen. The manufacturers stand behind polyester screen with a 10-year warranty, but these screens often last 20 years or longer.

  • You May Like: How To Take Care Of A Salt Water Pool

    Pool Enclosure Kits Prices

    Pool enclosure kits prices range from $2,500 to $15,000 on average, depending on the size and materials. Aluminium pool screen enclosure kits cost $5 to $15 per square foot, and rounded, telescopic enclosures with glass or polycarbonate panels run $15 to $30 per square foot and up.

    Pool Enclosure Kits Prices

    $2,500 $7,500

    The Benefits Of A Screen

    Repair Screen Enclosures

    When most people consider a screen enclosure, usually one of the first reasons that come to mind for having one is: “It keeps the bugs out”. That reason alone is one of the top benefits of an enclosure.

    There are many other ways a screen enclosure can enhance your swimming and outdoor living space experience. Let’s take a look at some of these benefits.

    • More Shade: The screens on the enclosure let plenty of sunlight in while preventing direct sun. This light filtering quality is not only healthier than being directly in the sun’s UV rays but it’s also more comfortable.
    • Child Safety: Helps better secure children and keep them within view
    • Leaves and Debris: Another great advantage. No leaves!
    • Atmosphere: Creates a sense of privacy or personal space
    • Bugsand Other Rodents: Screens do a great job keeping out the bugs, mice, snakes, and most other pests.

    A screened-in pool will keep out insects, leaves, and provide shade.

    Rob Hampton

    Read Also: When Do Pools Open In Virginia 2020

    RELATED ARTICLES
    - Advertisment -

    Most Popular

    - Advertisment -