Friday, May 20, 2022
HomeCleanHow To Clean Aluminum Pool Cage

How To Clean Aluminum Pool Cage

- Advertisment -

No One Should Climb On The Enclosure

How to Clean a Pool Screen Enclosure Cage by Yourself!

For people who own commercial swimming pool enclosures, this is one problem they have to deal with in most cases.

That is, kids will always climb or hung on the pool enclosures as they slid it back and forth.

Kids playing in a swimming pool with an aluminum enclosure

Well, this is unacceptable.

This is actually the main reason why we insist on locking pool enclosure at times whenever you are not around.

When they involve in such actions, there is a possibility that the joints and the entire structure of the enclosure will be subjected to unnecessary weight.

Moreover, we consider this as mishandling the pool enclosure.

Remember, they will be risking their lives too.

What about if one falls from the pool enclosure into the swimming pool water?

That could be a tragedy.

A swimming pool enclosure accident can be so devastating

This is all about following the swimming pool safety standards, and protecting the aluminum pool enclosure.

As a result, this will reduce the service lifespan of the pool enclosure or cause injuries.

The bottom line is, no one should be allowed to climb on the pool enclosure for any reason.

Mildew On White Aluminum Pool Enclosure

  • Ken on Jan 02, 2018You have been doing this the hard way. Look for a product called “Wet and Forget” at Walmart, Amazon, and a lot of other places. Follow instructions and be patient. It takes a while to perform it’s magic but it will work.
  • 1Jo22450261 on Jan 02, 2018Walmart sell a safe, bio-degradable, non poison cleaner Its called Pow-r. it comes in a plastic spray bottle or a gallon jug. It can be sprayed on about any surface safely. It will desolve mold and mildew, (sometimes you may have to scrub a little. It will desolve the brown and yellowing foggy look on your vehicle headlights. I’ve used this stuff for many years and it saves a lot of work. And as always, use disposable rubber or latex gloves to keep your hands out of the gunk.

Aluminum Pool Enclosure Maintenance Tips You Should Know

Note: If you are looking for a swimming pool enclosure, you can check Excelite DIY pool enclosure with competitive price. Check it now.

Our aluminum pool enclosure is durable and reliable.

However, you need to adopt the recommended care and maintenance procedure.

Otherwise, it will not last for long.

As a company, we believe our pool enclosures will serve your pool for more than 25 years.

Ideally, it is the main reason for choosing aluminum and solid polycarbonate sheet.

It aims to extend the swimming season even during winter.

Aluminum enclosures for outdoor swimming pools

So, how should you maintain aluminum pool enclosures?

Here are some tips on how to go about this process:

Read Also: Unclog Pool Skimmer Line

How Do You Clean A White Aluminum Pool Enclosure

4.2/5enclosureto washcleaningenclosure

Simply so, how do you clean an aluminum pool enclosure?

Spray a solution of dish soap and water on the cage and scrub with a soft brush. Rinse completely and check to see if the algae was removed. If the dish soap does not seem to remove the algae, make a weak mixture of bleach and water, using only about one part bleach to about 40 parts water.

Furthermore, can you paint aluminum pool enclosure? Pool cage aluminum is not anodized but rather painted. With proper preparation it can be repainted with oil based enamel paint like rustoleum. A small roller works best and you can prep the area with bleach. Because of the mess, painting is usually done at the same time as re-screening.

Likewise, people ask, how do you clean a white pool enclosure?

A solution of half vinegar and half warm water is the right concentration to take care of problem areas on your pool deck or screen enclosure. Using a sponge or scrub brush dipped in the vinegar solution, clean away visible mold, mildew or algae. If you like, you can skip the rinse and leave the solution to air dry.

How do you pressure wash a pool screen enclosure?

A. Use a mild soap and water mixture, such as dish soap. Using a soft bristle brush, scrub from side to side, up and down, front and back, and then rinse the screen soap free with a garden hose. After rinsing, snap-dry the screens to shake off most of the water then allow them to air dry.

Reinforce Swimming Pool Whenever Necessary

Pool Cage Cleaning

With time, there are sections of the swimming pool enclosure that may become weak.

This is common when the pool enclosure is subjected to extreme weight or windy conditions.

Aluminum pool enclosure keeps water free from snow

The truth of the matter is, you will only know that certain sections require reinforcement by conducting regular inspections.

You need to check all joints and sliding cover.

There should be no spaces between the covers that can allow dust into the inner section of the pool enclosure.

As you reinforce the pool enclosure, use the same materials as those from Excelite Plastics Ltd.

This is to avoid any incompatibility issues.

You can contact our team and we will advise you accordingly.

Don’t Miss: Pool Water Iron Removal

Why You Need Your Pool Cage Painted

Living in Florida is wonderful. It is sunny and serene. People vacation there for a reason.

If you are lucky enough to live in Florida, you already know how humid it is. What happens when you combine all that fresh salt air with a ton of humidity? You get corrosion!

Whether you have a pool enclosure now or are getting one, you need it to be painted. This is not a time for you to do it yourself. Those projects might be fun for small jobs, but you need a company that can do custom painting in Florida.

Painting a pool cage is a big job. You need to make sure it is done right.

Tips On Making Your Pool Cage Or Lanai Structure Look Brand New Again Thursday June 10 2021

A lanai is a Hawaiian name for a covered porch that is often on the ground level of a home and features screens instead of glass windows. Its a popular feature in many Florida homes but, like screened pool enclosures, the screens can develop unattractive discoloration over time. Knowing how to clean and maintain the screens will keep your property looking good as new.

True Aluminum is the leading aluminum construction company serving the Lakeland and Plant City, FL areas. Our team of 50+ aluminum and screening experts provides superior repair services for screen pool cages and lanais throughout central Florida.

Also Check: Ideas To Cover Pool Equipment

Is It Worth To Repair The Top Of The Pool Screen Enclosure

In some situations, yes, especially if the damage is not as visible and drastic. But, depending on the screens wear level, repairs may not be sufficient.

Ideally, examine and evaluate how degraded the top of the pool screen enclosure is. The greater the defects, the harder it will be to get around without making it look visibly bad.

In many cases, it will be better to simply replace the screens.

Get Someone Else To Do It

How To: Pool Cage Pressure Cleaning | Screen Enclosure Pressure Washing – Amazing Home Maintenance

After doing all these and you still cant get your pool cage to shine, you might need to call a professional to do it for you. If you also dont have the time, hiring a contractor will help make your life easier.

If you choose to clean your own pool, theres a risk of damaging the screens or frames. Using a pressure washer improperly or scrubbing with the wrong brush can easily damage your enclosure. You will also have a hard time removing mold and debris in the high-up places. Be careful when climbing the ladder or balancing on walk boards.

To avoid the risk of damaging or getting injured, hire experts who have the experience and tools to get the job done correctly and quickly. Its the best method for those who have a budget or dont want to go through this hassle. Check for local screen enclosure contractors near you.

The time will also come that your screen enclosure is beyond cleaning and is due for restoration. You can get a quote from a contractor in your area.

About the Author

Don’t Miss: Average Cost Of A Salt Water Pool

How Do You Get Mold Off Pool Screens

A solution of half vinegar and half warm water is the right concentration to take care of problem areas on your pool deck or screen enclosure. Using a sponge or scrub brush dipped in the vinegar solution, clean away visible mold, mildew or algae. If you like, you can skip the rinse and leave the solution to air dry.

What Is The Best Way To Clean Windows Without Streaking

Mix one part distilled vinegar to 10 parts warm water in a spray bottle. Wipe down the window with a a soft, clean, lint-free microfiber cloth or paper towel to remove dust before you spray your solution, then spray the entire surface.

Dont forget to share this post

References and Further Readings :

You May Like: Filling Pool With Well Water With Iron

Getting Rid Of Algae Growth On Pool Cage Screens

For our second project, our customer had a perfectly functional pool cage and it wouldve sufficed for the summer if it werent for the old wall screens. You can see from the before shots how they didnt look black anymore. From the side, they looked gray, and in direct sunlight, they appeared almost white. After delivering our service, our newly-installed Superscreen 14/16 offered an almost clear view of the other side.

Before the replacement, you would notice algae growing on the screens. Youll see hints of green upon closer inspection of the photos, but in real life, they were in your face. Even if the pool was enticing, our customers found the old screens too nasty to enjoy the water.

The screen panels on the roof were already replaced not too long ago. After our screen replacement service, the rest of the screens of the pool cage were up to par in terms of appearance and durability. Now our customers can enjoy their swim without cringing in disgust towards the old screens.

Ref. No. 18781

How Do You Get Rid Of Mold On A Screened Porch

Pool Enclosure Cleaning

Porch screens in damp or shaded areas are susceptible to mold and mildew growth, which often appears as a green, powdery substance. To clean mold off porch screens, mix equal parts distilled white vinegar and water in a spray bottle. Spritz the solution onto the screens and gently scrub with a soft-bristled brush.

Read Also: Pool Pump Screen Ideas

How To Clean A Lanai Pool Enclosure

If you have an outdoor living space, you know how difficult it can be to keep it clean. Whether it be a porch, a patio, a veranda, or a lanai, youll want to keep the area tidy, especially if you have a pool.

Check out our helpful tips for keeping your outdoor spaces clean so you can get the best use out of them. Keep reading to learn all about lanais and how to maintain them.

What is a Lanai?

The word lanai is used to describe a type of covered or enclosed porch. Lanais are typically a combination of a porch and covered patio area as they are designed in a house floor plan and often have part of the roof over them.

Lanais are very popular in places with tropical climates, like Hawaii and Florida. They can also be furnished as if it is an additional room in a house.

Many homeowners add a screen enclosure to their lanai because it offers a great way to experience the outdoors while enjoying the comforts of your own home. A lanai enclosure is a good option for creating an additional outdoor living space thats perfect for relaxing, or entertaining family and friends.

Benefits of Adding a Screen Enclosure to Your Lanai

The screen allows people to enjoy the sunshine and fresh air, all while keeping out bugs and debris. Especially for homes with a pool lanai, a screen minimizes the amount of maintenance required to keep the area clean, while maximizing visibility to the beautiful outdoors.

Clean Lanai Surfaces with the Wet & Forget Xtreme Reach Hose End
  • Aluminum

What To Do If Your Lanai Or Pool Cage Screen Gets Damaged

Unfortunately, life happens and your lanai or pool cage screen can occasionally become damaged. An accidental tear from pets, children, weather, or other issues may be repairable. However, more extensive damage like a rip along the frame may require screen replacement to protect the structures integrity.

Other causes of damage that will need screen repairs or replacement include:

  • Prolonged sun exposure

You May Like: How Many Btus Do I Need For My Patio Heater

Use A Pressure Washer

For those grimy areas that dont want to budge, you can use a pressure washer to clean it. To eliminate stubborn stains and mold, power wash your enclosures screens and frames. This is considered one of the most convenient methods to clean screen enclosures and great for hard to reach areas.

The high pressure combined with hot water usually eliminates most of the mold and grime on the screen. But before turning it up, start with a low pressure so your screens wont get damaged. You can also use this method to clean your pool deck, under-truss lanai, and porch. If you dont have a pressure washer, you can rent or buy one from a hardware store.

Heres a video of how to clean a screen enclosure with a screen roof, specifically a pool cage, using the two methods mentioned above.

First, apply a cleaning solution on the screens. For the next two steps, youll need to soft brush the inside and outside of the screens. After, youll need to power wash the screens with medium pressure. Then youre done! You can let it air dry or use a chamois to wipe excess water.

But scrubbing and power washing can only remove most of the mold, algae, or mildew. To clean these leftover grime, youll need to use chemicals.

Is Vinegar Or Bleach Better For Killing Mold

How to clean a pool cage or screen enclosure âinsideâ?

Bleach and vinegar both kill mold, algae, and other contaminants however, many homeowners hate that lingering bleach smell around their pool, and especially since the air might already smell like chlorine! For those especially sensitive to bleach smells, use a 50-50 white vinegar and water solution instead of bleach.

Once applied, allow this mixture to soak for several minutes on the mold or other debris before scrubbing. Rinse thoroughly and ensure you dont leave anything behind. While that vinegar smell might also be a bit bothersome, note that it does dissipate faster than bleach smells, so rest assured that your pool enclosure will be comfortable for use before too long.

Recommended Reading: Half Mansard Screen Enclosure

The Dos And Donts Of Cleaning A Pool Enclosure

So, you installed a new pool enclosure at your home and it looks great. Now you obviously want to take good care of it right? Well, it is not as easy as it seems. There are various things that you need to take into consideration when keeping it maintained that are important to understand. Keep on reading to find out more about the dos and donts of pool enclosure maintenance.

What to Do

A great way to maintain your enclosure is to wash it with a mixture of mild soap and water. You can use dish soap for this purpose as well. During the cleaning process, try stroking the enclosure with a soft bristle brush. Always scrub with an up and down, side to side or in a front to back manner. Make sure that your strokes are gentle so that the enclosure is not damaged in the process.

After you are done with the washing process, it is important to let the thing dry off. You can use a cotton cloth to dry it off as well. Only after the enclosure is completely dried of will it yield the results of your efforts. If necessary, repeat the washing process as your enclosure may require more washing, depending on how dirty it has gotten.

What Not to Do

Never try to use strong bleach to clean in the pool enclosure. If your enclosure is of aluminum then the bleach is likely to compromise its integrity. Therefore, always be careful with the brand and amount of bleach you use for cleaning.

Removing Mildew From A Pool Cage

30 September, 2011

A pool cage, or pool screen enclosure, is a large cage surrounding a swimming pool, usually consisting of aluminum bars and sometimes fully covering the pool area with see-through screens making up the walls and roof. It is a permanent foundation structure through which people must pass to gain access to the pool. It can prevent children and others from entering the pool unsupervised a screened cage enclosure can serve to keep out dirt, dust and debris. If your pool cage becomes subject to mold growth, you can clean the mold using the proper disinfectants.

Scrub the pool cage with soapy water on a soft sponge. Mild liquid detergent can kill mold and mildew, thanks to the weak acids that it contains, and will not harm aluminum the way that alkali cleaners will. Never attempt to scrub your pool cage with an abrasive sponge or a scouring pad, or the aluminum with scratch permanently.

  • A pool cage, or pool screen enclosure, is a large cage surrounding a swimming pool, usually consisting of aluminum bars and sometimes fully covering the pool area with see-through screens making up the walls and roof.
  • If your pool cage becomes subject to mold growth, you can clean the mold using the proper disinfectants.
  • Mix a solution of chlorine bleach and water if detergent fails to clean the mold from a pool cage.
  • Rinse your pool cage with cool water to remove the detergent or bleach.

Related Articles

Read Also: Mandalay Bay Pool Hours

RELATED ARTICLES
- Advertisment -

Most Popular

- Advertisment -