Monday, April 22, 2024
HomeGroundHow To Fill In Ground Pool With Water

How To Fill In Ground Pool With Water

- Advertisment -

Pool Water Delivery: Where To Get Water To Fill Your Pool

How to Fill In An Inground Pool – How to Fill an Inground Pool with Dirt
  • |July 26, 2019

The average swimming pool holds thousands of gallons of water. If youre new to owning a pool, you may be surprised at how expensive it can be to fill, and how often you need to add water to keep it full.

So where does all that pool water come from? And is there a way to save money on pool water? Lets take a closer look at pool water delivery, and find out your best options.

Skip to:

Balance Your Water With Pool Calculator

Regardless of how you fill your pool, its absolutely essential to test and balance your water chemistry frequently. Thats where Pool Calculator comes in. We make it simple and seamless to keep your pool clear, clean, and balanced. With our convenient app, you can test your chemical ranges, find your total alkalinity, balance your pH, stabilize your free chlorine levels, and check for calcium hardness. Get the Pool Calculator app on your desktop, Android, or iOS mobile device to get started!

External sources:

Tools & Demolition Equipment Cost

The tools and demolition equipment required are included in a professional’s estimate, but rise if access to the pool is difficult. For a DIY project, renting equipment costs homeowners $1,000 to $3,000 on average.

Sometimes, fencing needs to be removed to provide easy access for the equipment. Otherwise, smaller equipment that fits through a gate takes longer to demolish and adds to your overall labor costs.

Tools & Equipment Costs To Fill In A Pool


You May Like: Dolphin M500 Amazon

How Long Can I Run My Well Pump To Fill The Pool

A well pump is pretty much the same thing as a pool pump. They consist of an impeller that moves the water and an electric motor to turn the impeller. Those electric motors are designed to run continuously, so as far as the pump goes, it can run until it fills up your pool with no issues.

The real concern with continuously filling your pool with the well isnt the pump then, its the well itself. If your well has a history of running dry or low on water, or if it draws up sand when you run it a lot, then give it a break when trying to fill your pool. It may need time to refill the well area with water so it can keep up with all the thousands of gallons of water you are pulling out of the earth.

All wells can be different. Dont think because your well is super deep, it wont run dry. And dont think because your well is shallow, that it will run dry. Water stores in the earth at all different depths. I will say that most of the time if it has been raining a lot in your area, you have a better chance of not having any issues with your well filling a swimming pool.

Cost To Fill A Pool With Water

Ask Angie: The cost of filling in an in

The average cost to fill in a pool with water is $80 to $160 for adding 15,000 to 30,000 gallons to your water bill. Bulk pool water delivery by truck costs $500 to $1,500 or $0.042 to $0.074 per gallon based on the amount needed and if it is already chlorinated. Using a garden hose takes 30 hours to fill a pool versus 2 hours with delivery.

You May Like: Mandalay Wave Pool

Adding A Moisture Barrier Or Painting The Outside Of The Pool Is Not Recommended

During my 35 years of installing above-ground pools, I have seen some crazy stuff. Some of it was what some do to try to protect the outside wall of their sunken pool.

I have seen homeowners line the outside of their pool with roofing felt paper, paint it with everything from Rustoleum to tar to liquid rubber. These things take a lot of time and some can cost a lot of money.

The verdict of 35 years of observation is that doing these preventative things are a waste of time. In truth, Ive seen some of this stuff do much more harm than good.

Any process or condition that causes moisture to get trapped is a very bad thing. Allowing the pool wall to breathe and dry if it gets wet or stay dry or stay wet is best overall.

Metal in the earth will eventually corrode away. So will metal on top of and above the earth. Just like animals, metal is breaking down and dying the day its made. Sometimes the rate of corrosion is faster and no one knows why.

I have seen pools rust prematurely in the ground and above it with no clear explanation. And I have seen pools have no rust for 20 years in all conditions also with no clear explanation.

If you are the type of guy who has to try to control nature, then you will most likely go ahead and try to protect the outside of the buried pool wall in some way. Thats cool, bro. Be you.

Cost To Fill In A Pool

The average price to remove a swimming pool falls between $3,000 and $10,000. The cost to eliminate an above ground model averages $2,700. An inground unit can be extracted for $9,000 to $19,000 or filled in for about $5,000.

A homeowner may choose to scrap their swimming pool for a variety of reasons, whether for safety reasons, no longer wanting to pay for maintenance, replacement of an old model or for landscaping reasons. In any scenario, this is no small task. The job involves heavy-duty equipment and machinery, safety gear, city and/or county permits and debris removal. It’s important to hire a pro for a removal project.

Don’t Miss: Can You Make Your Own Inground Pool

Cost To Fill In A Pool With Dirt

The average cost to fill in a swimming pool with dirt is $1,000 to $6,000, including delivery, labor, compacted fill dirt, and topsoil. Structural fill dirt costs$10 to $30 per cubic yard, depending on the amount needed.

Cost To Fill In A Pool With Dirt

Pool Size
$4,500 $13,500

*Based on pool thats 6 deep. Dirt only.

Always hire an engineer to supervise the filling and compacting process to prevent sinking or swelling from poor drainage.

Structural fill dirt needs to be heavily compacted, but not the top 3 to 12 of topsoil. Since dirt settles over time, another option is mixing the broken-up concrete from the demolition with fill dirt.

Also Check: Changing Chlorine Pool To Saltwater

How To Level An Above Ground Pool With Water In It

First Time Water Fill in Above Ground Pool – Hydra Hot Tubs & Pools

Can you still level and above ground pool even if theres water in it? Sure you can! Heres a guide on how to level an above ground pool with water in it.

How To Level An Above Ground Pool With Water In It? | Sage Bathrooms

Most people choose to level their above groundpools before the pool actually gets installed. However, there are times whenthe ground itself sinks after the pool was already set up.

That said, is there a way on how to level an above ground pool with water in it or is it already too late?

Fortunately, you can level an above ground pooleven if theres water inside. You just need to follow the steps we have below:


Don’t Miss: Tropicana Casino Pool

What To Do If Your Swimming Pool Water Is Brown

A brown swimming pool is disgusting and would certainly drive people away from enjoying their leisure time swimming. Swimming in a brown pool will get your hair, nails, and even your suit discolored. The major cause of this brown discoloration is due to the abundance of iron in the water. The high imbalance between iron element and other elements causes your pool to go brown.

If you are wondering how iron got into your pool? Well, just so that you know, iron is the fourth most abundant element on the planet. It naturally exists in water, so you shouldnt be surprised that its in the well water that you used to fill up your swimming pool. Its also the reason why your pool is cloudy.

Dont too worry if your pool is brown because there is always a way to get it looking all attractive again.

If you are using well water to fill your pool, as soon as you notice the brown discoloration in the pool, stop immediately. However, if the brown discoloration didnt appear immediately until after sometime, what you should do is to get the pool analyzed. A pool expert analyzing the pool will let you know which method will be more convenient in treating the pool.

After the pool must have been analyzed, you can use any of the methods below to remove brown color from the pool.

  • Using the Shock Treatment method

You may find it complicated using the stock treatment instantly. Its crucial that you read the instructions for use that is written on the label.

Once You Are Ready Use The Following Steps To Balance It

As of the moment, your pool is under major strain. Thus, for each of the following steps, move slowly. A single wrong move would leave you with the equivalent of a broken levee. It would be best to avoid such things.

1. Determine the Exact Variance:

From the beginning, youll want to know how much to compensate. Otherwise, it is like you are playing a game in the dark. When the lights are out, accuracy is out of the question. Without the right data, any approach you make will be approximate at best. From our perspective, such an intrepid endeavor may seem noble. Still, it tends to produce lackluster results. In the end, those are what matter the most.

2. Compensate for the Discrepancy :

Following that, you can start to lift the pool. Since there is so much weight on the wall, this is a vital step. Using multiple points of contact, lift the lowered section of the wall. That way, it is level with the rest of your pool. Unless the pool is fixed entirely, then your work is far from over. Until your balances air bubbles rest in the center, you must soldier on. Luckily, in most instances, things are that difficult. Plus, once you have done this, it will be far simpler the next time. That way, you can help your friend when they find themselves in your shoes.

3. Create a Solid Support Base:

We hope our guide on how to level an above ground pool with water in it has been helpful to you. Remember to use help, be safe, and call an expert when needed. Happy swimming!

Read Also: Pristine Blue Pool Chemicals Reviews

Cut Costs By Reducing Pool Water Loss

One of the best ways to save money when you refill your pool is to protect the balanced water thats already in it. You can cut down on your water expenses by reducing or eliminating the four biggest pool water wasters:

  • evaporation
  • excessive splashing
  • filter backwashing

They might seem fairly innocuous, but every drop adds up, and before you know it, you might find yourself spending money like water.

How Do I Fill My Inground Pool

11 Common questions about filling an above ground pool with well water ...

How to Refill and Drain an Inground Pool

  • Step 1 Rent a Sump Pump. Go to your local equipment rental store and rent a sump pump that is submersible.
  • Step 2 Lower the Sump Pump in the Pool.
  • Step 3 Clean the Pool Sides.
  • Step 4 Remove the Pump.
  • Step 5 Refill the Pool.
  • Step 6 Add Chemicals.
  • You May Like: Pristine Pools Pittsburgh

    Using The Pool Pump Multiport Valve

    You can use the waste outlet on your pool pump by switching the multiport valve to the WASTE position. If you have another two-way valve on the waste line, make sure its open as well.

  • Start with your pump OFF.
  • Open the two-way valve if there is one.
  • Move the multiport valve to “WASTE”.
  • Turn the pump ON and run until you reach the desired water level.
  • Turn the pump OFF
  • Move the multiport valve back to “FILTER”
  • Close the two-way valve if there is one.
  • Determine How Much Water You Need

    How Much Water Do You Need For Your Above-Ground Pool? Assuming you are filling a new swimming pool or you bought a house and found an empty above-ground pool, youll need to know its capacity before you can refill it.

    You have to do some simple calculations to determine the pool volume on gallons. By doing so, youll avoid overspending on the amount of water you buy or draining dry your well. It can also help you save on any other refills that might come later.

    Of course, you can do all the calculations using an online calculate. But if youre a DIY kind of guy, you will want to understand the pool volumes math.

    Recommended Reading: How To Clean Pool Plaster

    How To Drain And Refill Your Swimming Pool

    wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 19 people, some anonymous, worked to edit and improve it over time. This article has been viewed 659,050 times.Learn more…

    Swimming pool water can get bad over the years so bad that chemicals lose their effectiveness. With this information and a free weekend, you can drain and refill your pool without spending much more than $200 .

    What Is The Best Backfill Material

    Filling Your Pool With Well Water

    Backfilling can be done with sand, dirt, or gravel. Consider the goals of the project and the budget when choosing a fill material.

    The backfill materials we normally use at Superior Groundcover are class 2 fill sand and pea stone. Pea stone is the best fill material because its self-compacting. Other fill materials require more labor for proper compaction which adds to the labor cost. Even if sand or dirt is properly compacted, it continues to settle over time, which can result in future damage. The movement can create a void under the cement pad. The same occurs when a lawn is installed on top of this material.

    You May Like: Head Lice In Swimming Pool

    When The Pool Level Is Severely Off

    Suppose the pool was more than a few degrees from perfectly flat. If that is the case, then things are more complicated. Since the pool is so tilted, the water is concentrating in one area. Thus, it will be far heavier for you to lift. Plus, on top of that, the wall is far more likely to break. While you move it, extreme caution is advised. Otherwise, you might be looking for a replacement sooner than expected.

    My Well Water Looks Bad What Do I Have To Do Once The Pool Is Filled

    In this case , its easiest and best to take a sample of your well water to your local pool store and have them test it. They may sell you some stuff you dont really need, but they will get your water clear and healthy and ready for swimming.

    In most cases, lots and lots of liquid chlorine will do the trick with most bad well water. This is the case because chlorine is an excellent oxidizer and will cause a lot of things in the water to dissipate and be gone forever. Some well water will have a lot of metals in it, so even though chlorine can oxidize it, it may be better to add a product to deal with the metals too. Your local pool store will be more than happy to help you.

    Recommended Reading: Liquid Chlorine Shock Calculator

    What Tools Do You Need To Fill A Pool With Well Water

    • A garden hose
    • A bucket

    Note: Dont scrimp on your pool water test kit. Get a good one. It will last years and save you a lot of hassle by giving you accurate readings. Many pool owners have wasted countless hours because of bad readings from low quality test kits.

    Lets get to work.

    How To Reduce Pool Water Loss And Cut Costs

    Water Truck To Fill Pool Near Me

    Pools lose water every month because of evaporation. During the height of summer, a 400 sq. ft. pool can lose almost an entire foot of water per month through evaporation. You cant eliminate this type of water loss, but you can minimize it by using a pool cover. A cover keeps wind from leaching water away from your pool at as fast a rate.

    You can also watch your pool depth to discover leaks early and repair them. Above ground pools with vinyl liners can develop small tears that leak water slowly but add up over time. You can purchase inexpensive kits for DIY repairs. Inground pools can be repaired more easily when the leak is small, too.

    Questions? Let me know.

    You May Like: Hanby Pool

    Things To Do Before Filling Your Above

    Filling your above-ground pool is a crucial step. Its the first of the many tasks required to make your above-ground pool operational. If you do it right, then the rest of the functions like chemical balancing and maintenance will be a breeze.

    Here is a set of things you have to do before you can refill your swimming pool. They will make the process easy, straightforward and ensure its a success.

    Intro To Hydrostatic Pressure

    I’d like to detail what exactly happens when you drain a pool that is partially submerged in ground water. To this end I have whipped together some images to help describe this.Shown in the images is an example of a vinyl lined pool with a hard shell outside and a respectably high ground water level outside the pool. The ground water is just sitting underground saturating the soil but it does in fact have somewhat of a surface to it. As long as the pool water level is equal to or higher than the surface level of the ground water then there is greater pressure from the pool water and thus a net outward force holding the liner against the wall of the pool’s outer shell. As water continues to be drained from the pool the surface level of the pool water drops below that of the ground water and a net inward pressure develops. This net inward pressure is a result of the fact that there is more water pressure on the outside than the inside. If the pool’s shell is porous or unsealed then water seeps through the shell and collects behind the liner. If this happens quickly then the liner will appear to float up off the bottom of the pool as more water collects below it and more water is removed from above it. If the shell is well sealed and non-porous then the seeping will occur slowly allowing the pool to continue emptying and creating a buildup of pressure on the outside eventually collapsing the walls of the pool’s shell or pushing it up out of the ground.

    Recommended Reading: Screens To Hide Pool Equipment

    - Advertisment -

    Most Popular

    - Advertisment -