Factors Authority Consider Before Approving In Ground Swimming Pool Construction
Normally, the authorities will consider a range of factors before approving your designs. They may visit the site, conduct experiments, do surveys, etc.
This will ensure you dont contravene any laws or by-laws.
They do this to ensure the following:
- Promote Safety Standards
Ideally, the essence first is to promote safety standards. The authorizing bodies have the mandate to assess whether or not the proposed swimming pool is secure for human use.
- Swimming Pool Design and Site meet the Set Construction Standards
You may have the best design however, it may not meet the construction standards and requirements. Besides, the site where you want to install the in ground pool could be a public property.
Or, it may interfere with other utility infrastructures.
The fact of the matter is
Depending on the design and site where you intend to install the in ground swimming pool, the authorities may:
- Approve the design, thus you will get the permit
- Propose adjustments in the existing design
Once you get the swimming pool permit, youre now free to commence your work.
Get Swimming Pool Building Permit
Now youve got your architectural plan, and youve decided on what particular one to go for depending on your budget.
But you cant just get out and start constructing. There is this vital part that you have to undergo get a government approval.
Each municipality, town, city or state has a particular body that overlooks construction of pools in their respective jurisdictions.
So before you even start excavating the land, you need to take the plan and design to the authorities to get approval.
Typically, the authorities look into a wide range of factors.
The interest is to determine whether or not your proposed swimming pool meets the minimum ratified threshold.
Modern & Irregular In Ground Pool Designs May Work
Nowadays, some of the typical designs include kidney-shaped, freeform, Lazy-L, True-L and Figure 8 among others.
Swimming pool with complex designs Photo Credits: AMAZA DESIGN
And the best part is you can easily modify the traditional shapes to conform to the modern pool designs.
We shall look into all the swimming pool designs option in the later sections of this article, so strap in.
But the shape is not the only factor regarding design and plan.
Some of the elements that these aspects also consider include landscaping and the existing features in the backyard.
Other features are the basin depth, decking style, overall appearance of the home and water features among others.
You can have a look at this swimming pool drawing and the actual structure:
In ground swimming pool drawing
Actual in ground swimming pool
These are pool design and construction by: CALM WATER POOLS
And the good thing about having a swimming pool plan is that it helps you to estimate the budget for the entire project.
It covers all aspects including the materials and timeframe.
So it makes it easy for you to determine whether or not youll afford to cater for the cost based on what is provided.
You also need to note that the more complex the swimming pool design is, the more expensive it is to construct.
Recommended Reading: Tankless Pool Heater
What Are The Disadvantages Of Salt Water Pools
Disadvantages of Saltwater Pools
More complex than traditional pools, they often require experienced technicians even for minor problems. Salt can cause damage to some materials, so you may have to avoid using specific types of heaters, fixtures, underwater lighting, liners, and even some types of masonry work.
Diy Inground Fiberglass Pools
Since were first and foremost fiberglass pool experts, we think its a good idea to start here. Its not uncommon for people to request just the fiberglass pool shell, but what does the DIY installation process entail?
1) Well, to start, it means doing your own excavation. Typically, this requires renting a trackhoe which can cost around $2,000 per week.
2) Youll also have to have the dirt hauled away unless you have space to keep it on your property. Trust us when we say its a lot of dirt. There are 1.35 tons of dirt per cubic yard . For example, a 15’x30′ inground pool that goes from 3′ to 6′ will add up to at least 60 tons of dirt.
You may opt to hire your own crew to dig the hole, who may or may not bring their own equipment and haul the dirt away for you. While you might save some money doing this part of the job yourself , you definitely wont save any time or energy.
A do it yourself fiberglass pool installation makes you the supervisor of the project, and ultimately, you are in charge of how everything turns out. When we handle it for you, you dont have the headache of worrying about whether your pool project is being done right.
3) Next, you have to install the shell. This is very important because the pool shell needs to be level. If you do this part wrong, you could end up with spider cracks on your beautiful new pool before you ever really get started.
Recommended Reading: Salt Water Pool Costs Per Month
What Are Some Common Challenges Associated With Do
The most common challenge associated with DIY fiberglass pool installations is getting the pool level.
For a first timer, this can be a frustrating experience. The key is to stick with it until you get it right.
One word of advice here: be careful to give yourself plenty of time for pool leveling.
If you’re having water delivered, build in a couple extra hours before they arrive and budget some extra time for the crane to sit on site while you work on getting the pool level.
Few things are more stressful than re-setting a pool over and over while everyone’s standing around waiting on you.
These situations can lead you to compromise and settle for a pool that’s not as level as you would like. Don’t do it. You’ll kick yourself later.
Another common challenge with straight-wall pools is keeping those suckers straight. This requires constant monitoring while filling the pool and placing backfill.
As soon as you set the pool, run a string line from corner to corner and keep it spot on until the pool is full.
If the wall bows in or out, the pool will probably be fine, but you’ll have to do some digging to get it straight again.
Please leave any questions you may have about installing your own fiberglass pool below, and I’ll do my best to answer them promptly.
Thanks and good luck!
Structural Polymer Swimming Pool Kits
|New pool construction from Pacific Pools of Orlando offers Do it Yourself inground pool kits. Combine your do it yourself pool inspiration with our pool kit innovation for the best polymer swimming pool kit design. Select from inground polymer pool kits, vinyl liner pools, or polymer hydra inground pool kit. We also offer do it yourself maintenance tips, sealants, and do it yourself chlorinator installation. A chlorinator is a great way to achieve more consistent pool water balance, and a new chlorinator will save you money by reducing the need for other pool chemicals. Pacific Pools of Orlando will help you build it yourself with the best do it yourself inground pool kits!|
|Introducing the worlds first truly DO-IT-YOURSELF Pool Kits. No other inground pool installs as EASILY or as QUICKLY.|
|This Exclusive Pool Kit Package includes:|
|Non Corrosive All Thermoplastic Pool|
|State Certified and Insured License # CPC035670Location Map|
Also Check: What Size Pump For Above Ground Pool
It Takes Too Long Or Too Much Time To Build Your Own Pool
The key to this is to have the necessary help in the building of your pool. If you plan out the project step by step and know when you are going to start the install the time it takes to build the pool is in your hands. Our inground pool kits are homeowner installed, in anywhere from 5 days to 3 weeks. It just depends on the time you have to devote to the project and how many continuous days and hours you have. We recommend having at least 4 people working on the pool project. Plan out your each phase of the project and how long you anticipate it to take based on your time frame. The best help are family members, relatives, friends or neighbors. Ask around, or post some flyers. You can also hire laborers from Craiglist , or use a construction staffing agency. do not let the dealer talk you out of doing the project due to time.
How Much Money Can You Save With A Diy Inground Fiberglass Pool
Overall, installing your own inground fiberglass pool can save you between 6 and 10 thousand dollars. However, if something goes wrong, you might end up spending a lot more trying to fix it. You may also experience more delays or setbacks than you would if you left it up to an experienced professional.
As we covered in our post on DIY fiberglass pools, in addition to the pool shell, youre going to have to pay for:
- Equipment rental : $2,000
- A crane: $400$800
- Pool equipment: $700$1,200
Keep in mind that these are rough estimates as prices vary by region.
Our personal advice is to let the experts install the pool for you. It costs more, but the risks are lower, the project gets done faster, and you have experts on hand to make the right decisions the first time around.
Your biggest challenges: Getting the pool level, installing the pool without damaging it, and pouring the coping.
Want to see how much your fiberglass pool might cost with professional installation?
Use our Design and Price Tool to walk through your options and approximate price!
Read Also: Lowering Cyanuric Acid Pool
Too Many Safety Regulations
How many times have I heard this pool dealers telling people that due to all the new codes and regulations do not try to build your own pool. You do not want to take on the liability if something were to happen. These are scare tactics. The easy way to go about this is to check with your local building dept as to what they require for pool safety. They will be more than happy to discuss this aspect ahead of time with you. Pool safety is extremely important for the well being of your family and friends. You town will likely require a pool fence around the pool area as well as a dual main drain system. In addition pool alarms, or door and gate alarms are required in many towns across the country. If you are using licensed contractors for different phases of your pool installation they are well versed in the laws and requirements in their field of expertise. The more research and questions you ask at the beginning of the process the easier the install will go.
What Should I Know Before I Install A Fiberglass Pool Myself
You have to budget for expenses such as equipment, dirt hauling, plumbing, water, and more. You’ll save about $6,000 to $10,000 overall. The most common challenge with DIY fiberglass pools is getting the pool shell level. Give yourself plenty of time to set it. For linear pools, you also have to make sure the pool walls stay straight.
Don’t Miss: Does Inground Pool Increase Property Value
Test The Plumbing & Electrical Pool Systems
What is necessarily required here is to determine whether or not the plumbing and electrical systems are functioning.
At the time, it is best to do this at this stage than assuming all is well.
Because should you find some fault, it becomes easy to fix then continue to the next step.
At some point, youll need to fill the swimming pool with water for these tests to be effective.
Fill the swimming pool with water to run the tests
So, if you find any kind of malfunction in plumbing or electricity, you only need to drain off the water and then fix the fittings accordingly.
While at it, you can also test if there are leakages and even fix them appropriately.
But if you find out that all systems are working, then you can comfortably move to the next step.
Build Your Own Swimming Pool & Save Money
When it comes to backyard enjoyment, youll have to search long and hard to find anything that offers more summertime fun than an inground swimming pool! More and more people have turned to Royal Swimming Pools for our high-quality, easy-to-order, one-stop shop, Swimming Pool Kits!
Our kits give you the opportunity to be more hands-on in every step of the pool design and building process with the flexibility of choosing what you do and do not want to tackle on your own you can hire a pool contractor, or you can roll up your sleeves and build your own swimming pool for a true DIY project!
IMPORTANT: Due to the rise in demand caused by the 2020 pandemic, pools in general are experiencing delays in manufacturing and shipping. It’s important to shop early if you are in a hurry to start splashing about. While pools traditionally purchased in the Spring or even late Summer can usually have many weeks of use that same year, the entire industry is currently delayed by several weeks and in some cases several months. If you are considering making your pool a DIY project now has never been a better time as many builders are currently booked over a year out due to the demand. The best plan you can have is to purchase your pool 3-6 months before you want to start building to ensure you have everything you need on time. View current lead times here. More on purchasing a pool during or even post-pandemic can be found here.
Don’t Miss: Pool Tile Grout Cleaner
Diy Vs Professionally Built Swimming Pool Which Is Better
The DIY trend continues to grow not only across the country, but the world. From YouTube videos to television shows, you can pretty much watch and learn how to do any task, no matter how big or small, on your own. Watching the videos makes anything look pretty easy, until you start the task and end up achieving nothing. While DIY does work in many cases, it cannot be called the preferred option in all scenarios. In fact, some jobs are best left to experts. One such job is building and installing a swimming pool.
Just get on the internet and search for DIY pools and you will find hundreds of results, videos, pictures, blogs, step-by-step guides etc., on how to build your own swimming pool. Reading through these steps makes the process looks like a simple task. But, is it really that simple?
Investing in a swimming pool is a big deal for anyone as it involves a lot of money. People think of ways that can keep the overall cost of the project as low as possible. Thus, they end up searching the internet for DIY swimming pools and begin the task themselves. While the biggest benefit of DIY pools is definitely cost savings, these cost savings can hurt you badly in the long run.Self-installation of swimming pools is a good idea only when you are an expert and are sure nothing will go wrong. Before you embark on the journey of DIY pool installation, here are some questions you need to ask yourself:
Why Buy Your Pool Kit From Pool Warehouse
- Best Online Pool Kit Price Guarantee!
- Pool Warehouse has a developed a factory direct pool kit program that will save you more than $10,000 compared to inground pool kits sold by local dealers. Pool Warehouse is committed to meeting or beating any competitors swimming pool kit price!
*Price Matching: Must be like kind items. If the swimming pool quote provided is missing items steps, lights, timers, etc. or has inferior products not recommended by Pool Warehouse, for performance or warranty issues we reserve the right to not price match those items. When comparing final pricing make sure shipping has been included and all necessary components needed to install your in ground pool kit have been added to your final order.
Also Check: Vdara Pool Cabanas
Read Also: What Should The Cyanuric Acid Level Be In My Pool
Make The Swimming Pool Deck
Actually, before this stage, you ought to have filled all the spaces behind the wall using concrete.
It is also an ideal way of making the walls stable.
Then youll be tasked with installing a pool deck. You got lots of options at your disposal.
For example, this is a wood swimming pool deck:
Wood swimming pool deck Photo Credits:ARCHI PRODUCTS
But before you choose on a particular one, you need to ensure that you consider the safety measures first.
Talk to your contractor regarding this and see what can work best for you.
The type of swimming pool deck to be installed on your swimming pool also depends on your area.
You need to check with the relevant authorities to determine the best option for your pool.
It is important that you be cautious at this stage.
Remember, the pool deck material should complement backyard.
It should be something that at the end of it be appealing to the eye and match the surrounding.
Furthermore, you need to ensure that you pick a relatively durable option.
It is a tedious process so I bet you wouldnt want to involve in demolishing and re-installing after every few months.
But most importantly, ensure that it is not a material that can make you and other users to slide and fall easily.
Just pick something that is durable, safe, good-looking and of course cost-effective.