Saturday, April 20, 2024
HomeMust ReadCan Someone Fill My Pool With Water

Can Someone Fill My Pool With Water

- Advertisment -

How To Fill Your Pool With Well Water

Filling Your Pool With Well Water

One of the things to consider when filling your pool with well water is the well pump. Submersible pumps are usually the best for this. If you are using a submersible pump, water from the well pump at a higher PSI. That is if its connected properly.

Another alternative is to use pool pumps to fill up your pool. However, you will be putting so much pressure on the pool pump because its meant to push water into the pool through the filtration system.

  • Connect one end of the hose to your submersible pump or pool pump.
  • Put the other end of the hose in your pool.
  • Switch on the pump.
  • During the process of filling, make sure you are careful of the well so that it doesnt get dry. Else, it will damage the pump.

    The Best Pool Water Delivery Options

    Pool Calculator makes pool chemistry easy. Also Available for iOS& Android

    Pool Water Delivery Quick Answers:

  • Testing and Balancing Pool Water
  • Where can I get water to fill my pool?

    If youre ready to set up your above-ground pool, inground swimming pool, or hot tub, that question is square one.

    One option that many pool owners consider is having water delivered by a local pool water provider. But what should you look for in a swimming pool water delivery service? In this article, well explore how much water delivery will cost, what type of water youll need, what you should know about pool maintenance, and how to reduce water loss and more.

    Can Your Pump Handle It

    The health and performance of your well pump is another consideration when filling your pool with well water. You might need to beef up your hardware to fill your pool efficiently, and plan to replace your equipment more often.

    Its also possible to use your pool pump to bring well water into your pool. Just remember thats not the pumps intended purpose, so it can put quite a strain on your pump, diminishing its ability to do its actual job of pushing pool water through your filtration system.

    As long as you keep these caveats in mind, filling your pool from your own well may be a winner for you and your wallet.

    Important: If your well is your homes only water supply, you might have a softener system and pump attached. This will ease or even eliminate concerns about water quality. You can fill your pool with a hose from the tap, just like you would with city water. But remember that youll be moving many thousands of gallons of water through your softener system, so be sure to factor in the cost of salt and the electricity required to pump the water to your pool.

    Also Check: How Long Should I Run My Above Ground Pool Pump

    When Do You Need To Fill Or Refill A Pool

    There are some severe water quality issues that can only be addressed by completely draining and cleaning a pool. However, for most homeowners, depending on their water quality and maintenance habits, a pool should be drained, cleaned, and refilled approximately every 2-3 years.

    All pools do need the occasional top-up, because the water level lowers due to splash-out, evaporation, backwashing, and other factors. Most pool owners need to top-up pool levels in summer every week or two.

    If your pool water levels are needing to be topped up more frequently, you may have a leak, or follow these tips below to help conserve water.

    City Water And A Garden Hose

    How to Know When It

    You can always connect your garden hose to an outdoor tap, and use it to fill your pool.

    Cost: The average American household uses about 12,000 gallons of water a month, so, depending on the size of your pool, you can expect to roughly double your water bill when filling a pool. Your city may also charge an additional sewer fee.

    Time: It can take up to 48 hours to fill a standard sized swimming pool with a garden hose.

    Considerations: You should call your water company or utility office and ask them about the rate for filling a pool. They will help you estimate the total costs, and may waive or reduce sewer fees if they know you are filling a pool. On the other hand, if you live in an area with water shortages or rationing, they may charge extra for filling a pool, or you may not be able to use city water to fill a pool at all.

    Also Check: How Long Should I Run My Above Ground Pool Pump

    Purchasing From A Water Delivery Truck

    A lot of pool and hot tub owners opt to use water delivery companies, and one of the main reasons for this is that oftentimes this type of water comes balanced or can be balanced for you for a nominal fee. Its also a popular choice because it allows for your pool or hot tub to be filled much quicker than it would be if you used your own hose.

    Even though purchasing water from a delivery truck is a convenient option, its not without its problems so please make sure to be vigilant about selecting a company that is insured in case of damages. You will also need to check that they have a hose long enough to reach your pool or hot tub from the driveway.

    Balance Your Water With Pool Calculator

    Regardless of how you fill your pool, its absolutely essential to test and balance your water chemistry frequently. Thats where Pool Calculator comes in. We make it simple and seamless to keep your pool clear, clean, and balanced. With our convenient app, you can test your chemical ranges, find your total alkalinity, balance your pH, stabilize your free chlorine levels, and check for calcium hardness. Get the Pool Calculator app on your desktop, Android, or iOS mobile device to get started!

    External sources:

    Read Also: What Causes Metal In Pool Water

    How To Fill An Above Ground Pool

    If youre ready to fill your above ground swimming pool, Im going to assume youve already taken care of everything else.

    Its set up where you want it and the necessary plumbing is installed or you have someone scheduled to install it.

    But the big question is, How do you fill it up? Where does all that water come from?

    Right?

    Not to worry. You have a few options. You just have to find the one that works best for you in the area where you live.

    City Water From A Fire Hydrant

    First Time Water Fill in Above Ground Pool – Hydra Hot Tubs & Pools

    Because garden hoses are such a slow way to fill a pool, many people wonder if its possible to fill a pool with water from a fire hydrant.

    Cost: Varies tremendously. In some places, a fire department will do it for free, as an exercise to flush the line. In other places, they will do it for the cost of water, or perhaps you need to rent the hoses or pay an access fee. In some cities, you cant do it at all and can get arrested for trying.

    Time: A fire hydrant in good working order can deliver 1,500 gpm, but you shouldnt fill a pool with fire hydrant water at full pressure even though it is one of the faster ways to do it.

    Considerations: If you have a fire hydrant near your home, it may be worth calling your local fire department to ask about the possibility. There is huge local variation in the use of fire hydrants, but it doesnt hurt to ask.

    Recommended Reading: Where To Buy Pool Pump Capacitor

    Make A Splash In A Cool Pool

    SJ Johnson, Inc. can make filling your pool or hot tub a snap.

    We offer 6000 gallon tractor trailer loads of water and a smaller 3000 gallon straight tanker loads of water.Our small tanker is well suited for jobs that arent accessible with a tractor trailer. Our tractor trailers carry up to 400 feet of hose to access your pool.

    Contact us today for a pool water or sand delivery quote.

    Advantages Of Having Your Pool Filled With Our Treated Water:

  • Quality – Our Water is pre treated for swimming pools
  • Time – Garden hose flow = 500 gallons/hours…our pumps= 18,000 gallons/hour
  • Water Sources – Our primary bulk water treatment plant is located in Braintree, MA with satellite sources in the metro west and south shore area of Massachusetts.
  • Treated Swimming Pool Water:
  • Filtered using diatomaceous earth filtration
  • Does not contain any iron, copper or manganese that can stain pool surfaces
  • Chlorinated to between .5 and 1.5 ppm using stabilized chlorine*
  • A quality control report showing a representative sample of a water analysis can be seen below.

    *Non chlorinated water available upon request.

    Seaport Hotel Boston, MA

    Recommended Reading: Can Vdara Use Aria Pool

    Bad Smelling Well Water

    They don’t call it Sulphur Springs, FL for nothing. Believe me, the water does smell bad. That rotten egg smell from our ground water and parts of Busch Gardens in Tampa? Forget about it. All those excess minerals can make it more difficult to keep your pool water balanced. Sulphur can prevent your pool chemicals from properly working and high iron and copper content can cause pool stains and damage your equipment if left unchecked.

    Test your well water for minerals and metals before filling your pool so you’ll know what you’re dealing with and what your chemistry starting point is.

    The Australian Static Water Program

    Filling swimming pool with water truck.

    In Australia, because of the severe bush fires raging throughout the country which can endanger any place at any time, they have developed the static water program.

    This is a government sponsored program which encourages householders to register their pools and other large sources of water so that they can be used in times of emergency.

    Participation in this program is completely voluntary but it is very popular and pool water has been used, successfully, to help divert raging bushfires from residential areas and to protect the people who live in them.

    As yet, there is no American equivalent of this program but it is possibly only a matter of time after some of the record forest fire seasons that have been witnessed here in the last decade or so.

    Don’t Miss: Ymca Hanby Outdoor Center

    Installing A New Pool

    Some homeowners remove a pool to replace it with a new one. Typically, the installation of a new swimming pool costs$17,000 to $45,000. People often opt for this choice when their existing one hasn’t been properly cared for and is suffering visible structural damage, or they are looking for a more modern look or more economical size.

    If your goal is to replace your pool, your project will be more expensive and take longer to complete than if you were simply taking one out. You should expect to pay added labor and material fees. However, you won’t have to worry about filling in the space since you’ll be installing a new one, which can save around $15 per cubic yard.

    Get a Pro Pool Removal & Fill In Quote

    The common tools involved include:

    • Excavator with rubber tracks.
    • Truck for pouring in fill.
    • Dumpster for storing debris and hauling it away.

    Typically, a contractor includes these charges in his or her estimate. If this is a DIY project, it could run a homeowner up to $2,000 to rent equipment for a few days.

    Another item that might add to overall price is access. If it’s tricky to get the required equipment into your yard for the teardown, fill-in, and haul-off, then the cost of the project could rise substantially.

    How Much Does It Cost To Fill A Pool With Water

    Pool filling costs less than you think with all factors considered. The average homeowner uses about 12,000 gallons of water per month. The average pool is somewhere between 15,000- 30,000 gallons. Using that simple math, it stands to reason that your water bill will at least double when you fill your pool for the first time from a hose. For just a few more pennies per gallon, you could enjoy more time splashing with the family and alleviate any hassle associated with the task at hand.

    You May Like: Lektra Pool Vacuum Reviews

    Cut Costs By Reducing Pool Water Loss

    One of the best ways to save money when you refill your pool is to protect the balanced water thats already in it. You can cut down on your water expenses by reducing or eliminating the four biggest pool water wasters:

    • evaporation
    • excessive splashing
    • filter backwashing

    They might seem fairly innocuous, but every drop adds up, and before you know it, you might find yourself spending money like water.

    Make A List Of Your Pools Features

    Why canât I use soft water to fill my pool or spa?

    All pools are different, so it’s best to have an understanding of what your pool is made of and how easy it will be for the contractor to access it.

    • Is your pool made of fiberglass or concrete/gunite?
    • Is your pool vinyl-lined?
    • Does your pool have ladders, stairs, or other similar features?
    • Are there any trees, fences, or other objects that would make accessing the pool with heavy equipment difficult?
    • Is there still water in your pool?

    This is all pertinent information for your contractor however, oftentimes, the contractor can discern all these things in person and provide you with a free quote within a day or two.

    Read Also: How To Clean Pool Tile Grout

    How Much Water Does Your Pool Need

    If youre refilling a pool youve owned for years, chances are you already know how many gallons it holds. But if youve built a new pool or are filling your pool for the first time , you might need to do a little math to calculate the precise amount of H2O you need. This will keep you from spending more than you need to on water, and help you budget for future refills.

    The easiest way is to use an online calculator. But if youd rather do the math yourself, you can get out your measuring tape, and figure up your water needs with a few easy formulas.

    Oval Pools:Length × Width × Depth × 6.7

    Round Pools:

    Length × Width × Depth × 7.5

    Kidney Pools::Length × Width × Depth × 7.0

    Liverpool:

    How Can You Test Your Well Water

    If you use your well water for various purposes, you probably test it on a yearly basis anyway so youll know that you can have it tested professionally by checking out the Environmental Protection Agency website where youll be able to find certified labs that will be able to test your water for you.

    You can also test your well water yourself, such as by making use of a DIY kit.

    The Spruce has some great kits that are highly rated for testing well water, so using one of them will help you find out if you need to treat your well water with specific chemicals.

    Don’t Miss: How To Deter Wasps From Pool

    Ways To Fill Up Your Swimming Pool With Water

    There are few different ways to fill your swimming pool with water. Some methods are faster than others, while some are more affordable. So whether youre looking for the fastest, or cheapest way to fill your pool with water, this section is for you.

    One of the easiest, and most affordable ways to fill your swimming pool is by using city tap water and a garden hose. All you need is running water, a garden hose, and an outdoor water spigot to connect it to.

    With that said, before filling your swimming pool, be sure to check for any water shortages or mandatory rationing in your state.

    How long does it take to fill a swimming pool with a garden hose?

    For an average-sized, 15,000-gallon swimming pool, it takes about 48 hours to fill the pool with water.

    What is the cheapest way to fill my pool?

    While it may not be the fastest way, using a garden hose and city tap water is the cheapest way to fill your swimming pool.

    The average American family uses 12,000 gallons of water per month. And the average-sized swimming pool is around 15,000 gallons. So with that math, it costs a little more than your average monthly water bill to fill up your swimming pool. Whenever you decide to fill your swimming pool, expect your water bill to double that month.

    Is It Cheaper To Fill A Pool With A Hose?

    Have you ever wondered if you can buy water to fill your pool? Specifically, if you can pay for a water delivery service that sends the water straight into your swimming pool?

    Choosing City Or Municipal Water

    How Can I Make The Water In My Pool Crystal Clear ...

    Have you ever considered using municipal water to fill your pool or hot tub? If you have a septic tank in your home, you may save big and only be charged for the water fill and not municipal sewage fees. Make sure to dial in to your local city number or water company to find out if thats the case for you.

    Read Also: What Is Pristine Blue Pool Chemicals

    Can I Fill My Pool With Tap Water

    watertap waterthepoolrefillpoolcanfill the pool

    . Similarly, you may ask, how much does it cost to fill a pool with water?

    The average cost of a typical 24′ round pool with your water hose is going to cost you about $80-$160. These costs are depending where in the country you live and your local water supply markets. You can get exact numbers by calling your local township and they will let you know your rates.

    Subsequently, question is, where can I get water to fill my pool? While every pool, household, and municipality is different, here’s an overview of the most common swimming pool water delivery methods.

    • City Water and a Garden Hose.
    • City Water from a Fire Hydrant.
    • Well Water.
    • Pool Water Delivery Service.

    Considering this, is it illegal to drain your pool into the street?

    Draining your swimming pool onto the street, into storm drains and near waterways is illegal in many townships and municipalities across the country. The best way to drain the pool is to empty it directly into the sanitary sewer line outside your home.

    What is the best way to fill up a pool?

    Fill your pool until the water reaches about the middle of a surface skimmer, covering the pool water filter inlet slightly. This may take from a few hours to a couple of days, depending on if you are using a garden hose or having your water delivered.

    RELATED ARTICLES
    - Advertisment -

    Most Popular

    - Advertisment -