How To Drain Last Bit Of Water From Pool
Every swimming pool owner knows that from time to time, draining the water from the pool is necessary. There can be a ton of reasons for this, including replacing your pool liner, or due to environmental conditions. Once the water has been drained, your pool can be exposed to potential damages. Its important to know how to drain last bit of water from pool, so you can minimize the risk of damage.
How To Keep An Inground Pool From Popping
If you live in an area that has a high water table, and you completely drain your inground pool, its possible the pool will pop. This means, without the weight of the water pressing on it, the pool may be pushed up and out of the groundliterally. The risk is even higher if you drain your pool after several days of heavy rain.
An inground pool can pop regardless of type. Concrete, gunite, vinyl, fiberglasstheyre all at risk of popping when drained.
If its time to drain your pool, and you want to keep it from popping, consider draining just half the water from the pool, and refilling it. The ability to do this will, of course, depend on your reason for draining it in the first place.
For example, if you need to repair the floor, youll have to completely drain the pool. If this is the case, you may want to consult a professional to avoid expensive damage to your pool.
If you decide to move forward yourself, take a few extra precautions to help prevent popping.
How To Siphon Water From A Pool
The water level in a properly installed and maintained pool tends to remain fairly consistent, depending on the weather and how many people use the pool. When heavy rainfall or an acute chemical imbalance requires a reduction in water volume, it’s easier on the pump to remove the excess from the pool manually. As long as you have a place to drain the water that is lower in elevation than the water level you want the in the pool, a siphon is the easiest method.
Check the drainage area to ensure it can handle the intended volume of water without damage and won’t overflow into a storm drain, public street or adjacent property. As a rule of thumb, if local regulations require you to backflush your pool filter into the sanitary sewer, you should siphon excess water into a house drain or sewer cleanout.
Insert one end of a 3/4-inch garden hose into the pool. Feed the hose into the pool slowly until all but the last foot is filled with water and entirely submerged.
Hold the other end of the hose in your hand and lower it beneath the surface of the water. Screw a hose cap onto the open end of the hose while it is still submerged. Lift the end of the hose out of the water and pull it to the drainage area.
Drain the pool water to the desired level. Remove the hose from the pool or raise the drain end higher than the water level to stop the siphon.
Things You Will Need
Also Check: Costco Chlorine Tablets
How To Siphon Water Out Of An Inground Pool
There are various reasons why one would need to drain water out from a pool. It could be that a repair needs to be carried out, chemical imbalance, or due to heavy rainfall. No matter the reason, if it has finally resulted in draining your pool, how do you go about that?
Some people might choose to use a pump to remove the water. However, it is always easier to use a siphon if the destination to drain the water has a lower elevation than the water source.
First, before you think of draining your pool, check with your local regulations. Also, check if the drainage area will accommodate the volume of water you intend to drain.
When all is checked, let us get down to understanding how the water hose syphon works.
Draining Water From The Frame Pool
Most often, the owners of such “fonts” begin to think about how to drain the rest of the water from the frame pool only at the moment when it needs to be disassembled for transportation or long-term storage. But not only in this case, it may be necessary to drain the water. In summer or autumn, torrential or lingering rains occur, filling the pool bowl. In such cases, if you do not figure out how to quickly drain the water from the pool, it can overflow and excess water pressure will damage the structure.
In standard designs, drain holes are located on both sides of the bowl. You can choose a solution for how to drain the pool water through a hose:
Video on how to drain water from a frame pool:
Don’t Miss: Best Pool Heater Chiller Combo
How To Drain Water From An Inflatable Pool
And yet, if you have an inflatable pool, then draining the water from it is not at all a difficult task, and you will not worry about its safety if you drain all the water in time and put the pool in a dry room for storage.
Video on how to drain water from an inflatable pool:
Video about an alternative way to drain water from an inflatable pool:
On A Sunny Daybut Not A Scorcher
The last thing youd want to do is do this job in the pouring rain, but dont think youre in the clear just because the suns out. That hot sunshine can seriously wreck your pool. Drain it during a heat wave and youre and you can see damage anywhere from pool liner damage to cracked pool walls and floors. Make sure your empty pool is never left sitting in heat about 85 degrees Fahrenheit, 29 degrees Celsius.
Recommended Reading: Is The Mandalay Bay Pool Open
My Pool Water Removal Assembly Part List
Mating PVC pipe PVC Glue Potential Rubber Couplings, sized accordingly, to connect your Check Valve to PVC and also to your Drain Hose A plastic coupling for your drain hose, sized accordingly Metal Mounting Straps to connect all couplings securely A pool drain hose to carry the water far from the pool probably at least 50 feet
From the above, which again, may be slightly different for your assembly the rest of the typical operations follow the steps in the video
1) When the water level starts to get too high, its time to take action:
2) Gather your tools and accessories, including an extension cord for the pump, your drain hose, a screwdriver for the mounting straps, whatever you use to open a small area of your pool cover whether an inground swimming pool or an above ground pool:
3) Once the cover is opened slightly and the assembly is completed, its time to get ready to submerge your pump:
4) Once your submersible pump is submerged and sitting stable you power it on, minimize kinks in the drain hose and ensure you have a nice flow far from your pool or anything else that could be damaged from the water:
5) And by all means WATCH THIS CAREFULLY! You dont want to drain too much water from your pool. Or in the worst case all of it. You simply want to remove the excess.
Is it just me, or does he actually look angry??
When You Have The Time
Again, you dont want to let your empty pool six for more than a week, max. But youll also need a significant amount of time during the draining process, because its never a good idea to run errands while youre moving thousands of gallons of water. My guess is that itll take upwards of eight hours to drain completelyand can last up to sixteen. And filling it? Thatll take just as long. Womp womp.
Recommended Reading: Costco Chlorine Tablets Sale
Things You Will Require
Before we list the things that you will require to performance this exercise effectively, let me remind you of three occasions when you might require professional help from an expert:
- If you live in a place with high ground water.
- If you dont know what kind of a pool you have.
- If you dont know what type of equipment are installed in your swimming pool.
With that said, here are the things that you will require to drain an Above Ground Pool:
Maybe you are wondering what are the steps involved. Here they are:
- Get Enough Garden Hose
The first step is to ensure that you have sufficient hose to stretch out from your pool to the place that you want to dispose of the water.
If you only use the drain plug on the pool, you might end up having the surface under your swimming pool being washed away and the pool might end up caving in, resulting in damage to the frame.
- Pick a Day with Lots of Sunshine
It is a good idea to choose a day when you will be home for a few days and a day with lots of sunshine.
When using a garden hose, you should expect to drain about 6 inches of water per hour.The rule of the thumb is: the bigger the hose, the faster you will drain your pool and the smaller the pool, the faster it will drain.
- Insert Your Hose in the Pool and Siphon The Water
Traditionally, to get the siphon running, many individuals used to suck one end of the hose using their mouth and in the process drink dirty water. You shouldnt do that!
- Use Your Broom
- Let Your Pool Dry
Figure Out Where To Dump The Water
Before you start emptying the water out of your pool, you’ll need to figure out where to dump it.
You’ll need to check with your city to see if there are any special ordinances governing pool water disposal, especially if you’re draining an entire pool: some cities require it to be dumped into the sewage system due to the chemicals.
Recommended Reading: How To Hide Pool Equipment
Turn Off Automatic Timers
If any of your pool equipment runs on an automatic timer, turn them off prior to draining so nothing turns on during the draining process.
This is important for your pool lights. Theyre meant to work underwater, and are water-cooled devices. When theyre not covered with water, they can quickly overheat and shatter.
Turning off timers is especially important for the pump, which is also water cooled.
Important:Do not allow the pump to come on while youre draining the pool. If it turns on after the water level has fallen below the skimmer, the pump can take on air, which can damage it.
The Moment Weve Been Waiting For: Start Draining
Turn on the submersible pump and start draining. Youll want to stick around for this part, no matter how long it takes. Keep an eye on the cords and the hose to make sure that its all going smoothlyand keep a house flood from happening.
One task you can do while your pool is drained is switch over to saltwater, so that your chlorine is operating at the lowest, safest, and most consistent levels possible. Make a smooth transition with the Salt Ways Eco Friendly Salt Chlorine Generator. Its ultra-reliable and comes with a lifetime warranty.
Recommended Reading: Lektra Pool Vacuum Reviews
Removing Water From A Pool Cover With A Garden Hose
If you have an above ground pool, it is possible to remove the water with just a garden hose. Heres the trick:
We prefer to use non-kink hoses like this one:
- You dont need to invest in a pool pump, which can range in price from $50-150.
- Its simple and quick.
- The hose in the pool can move around, causing the draining process to stop.
- You are limited to where you can drain your pool water. Once you detach the hose from the faucet, its tricky to move the hose. Just plan ahead and know where you want the water to drain.
Draining Water Level With Two Hoses
Lihat postingan ini di Instagram
Another option is to use two hoses. Place one end of your hose in a container where your water will move out and the other end in your pool. Make sure that the hose doesnt move as much as you can. Attach a shut-off valve to the bottom of the hose in the higher container, making sure that the valve is in the on position.
Next, attach your second hose, and screw one end onto the other mouth of the shut-off valve. Connect the remaining end of your second hose to a faucet. Double-check, all of your connections are properly secured. Fill the siphon hose by turning on your faucet until it begins to send water through both hoses.
Watch to see when the first hose is filled, then turn the shut-off valve into the off position. You can then disconnect the hose from both the valve and faucet to leave you with one hose full of water and connected to both the pool and container.
Open the valve, and then the water should rush out of the hose and into the final container or the storm drain if you prefer to use that. It could be an option if you need to deal with damage to a larger pool and you want to save some time. Wait until the air bubbles overwhelm the stream of water before you begin using a pump.
Lihat postingan ini di Instagram
Don’t Miss: Best Way To Clean Pool Tile And Grout
Why Drain Water From Your Swimming Pool
One thing to keep in mind is that the drainage location for your outlet hose or a garden hose must be lower than the end of the hose thats drawing in the water . It can be a little tricky to manage when youre handling an above ground pool, so be careful.
Thanks to YouTube, we are now draining the nasty ass water out of our pool using nothing but a garden hose and gravity!
There are also different ways to siphon pool water from a pool. The most common option is to use a hose and faucet. A hose with a wide diameter is often a good choice if youre removing a large amount of water from a location. Before you start experimenting with drainage options, however, you might wonder why youre draining your pool in the first place.
The most common reason to drain a home pool is that you want to replace the pool liner. If you have a leak or a tear in the pool liner, quickly replacing it will be essential. Theres no way around draining the water in this case. Other reasons to drain a pool include:
What Does It Mean To Prime A Pool Pump
A pool pump often gets pockets of air trapped inside. Anytime that it is not operating full of water such as when the pool is closed down or re-opened for the season, there is a potential to get air inside the pump.
Before you can operate a pool pump that has air in it, you will need to blow out the lines with water to get rid of any air and replace it with water. This process is priming the pump.
Also Check: How To Get Rid Of Wasps Around Pool
Rent Or Buy A Submersible Pump
You can likely rent one from a local hardware or home improvement store, but theyre not that expensive if youd rather have one on hand. Place the submersible pump on the floor in the center of the deep end.
- Make sure the power cord is long enough to reach from the bottom of the deep end to the nearest outlet without being stretched. Avoid using an extension cord if possible.
- Also make sure the drainage hose is long enough to reach from the pump to the spot youll be using to dispose of the pool water.
How To Drain A Swimming Pool
Tuesday, 25 March 2014 10:38:29 pm Australia/Sydney
There are many reasons why you may want to drain the water from your swimming pool. Perhaps the minerals in the water have become too concentrated, making it difficult to maintain a healthy chemical balance, or you may want to make repairs to the pool’s surface.
No matter what the reason for your job, if you want to take all the water out of your swimming pool, you may wonder just what kind of equipment to use to get the job done.
Asubmersible pump can be used if you have a concrete or gunite pool.
However, if your pool is vinyl lined or made from fibreglass it might be better to call in the professionals as these linings can tear, rip and collapse if the job is not done correctly.
Before you begin to undertake this task, you must think about where the water will go. In some places it may be a violation of local codes or regulations to send water down the gutters or storm drains as the volume could be too high for these structures to handle.
If you decide to attempt to drain your pool yourself, here is a guide.
Use as much of the water as you can in your lawn or garden. You can use the backwash pump to send it to this area, but you will want to make sure the water’s chemicals will not damage any plants in your garden.
Next, check all of the pipes for obstructions and clean them if necessary.
Attach the drainage hose to the pump according to the directions and set it to pump no more than 45 litres per minute.
Also Check: How Much Is Salt Water Pool