I Treat My Pool Water With Chlorine Every Time I Have Treated It But The Color Remains Rusty Brown What Should I Do
First of all, stop chlorinating the water. Adding more chlorine will worsen the coloration. Pool water will stay rusty brown until you remove the iron. Go to a pool shop with your water sample, and they will recommend the best approach to treat your water.
Alternatively, you can get an iron remover to reduce the level of iron in the pool water.
When To See Your Doctor
Trapped water usually goes away without treatment. If it bothers you, consider trying one of these home treatments to help relieve your discomfort. But if the water is still trapped after 2 to 3 days or if you show signs of infection, you should call your doctor.
If your ear becomes inflamed or swollen, you may have developed an ear infection. An ear infection can become serious if you dont get treatment for it. It may lead to hearing loss or other complications, such as cartilage and bone damage.
Your doctor can prescribe medications to eliminate infection and relieve pain.
After Your Chemical Levels Are Down
Finally, you can take a break on treating your water. Bet you never thought youd hear me say that! The truth is, its probably required by your city that the water you drain doesnt have high concentrations of pool chemicals. Before draining your pool, use test strips to make sure that your water is chlorine neutral, has a neutral pH, and doesnt have high traces of other chemicals. For the exact levels required, contact your local water authority.
Read Also: Plants To Hide Pool Equipment
Does Vinegar Remove Rust
You can use white vinegar for effective rust removal. The rust reacts with the vinegar and later dissolves. Simply soak the rusty metal object in white vinegar for a couple of hours and then just wipe to remove the rust. Alternatively, you can also use a cloth soaked with white vinegar to wipe the object.
If Theres Been Rain Wait
Stormy week? If you were ever curious about the absolute worst time to drain your pool, this is it. Because the rain has recently sunk into your yard, there is more pressure on the sides of your pool, and an increased risk that the ground will push the pool to pop out as the water empties.
Give the ground a few weeks to dry out before you attempt to drain your pool. While the ground itself might look dry, you never know whats happening under the surfaceand a pool pop-up is one mean way to find out.
Recommended Reading: Why Do Florida Pools Have Cages
A Method To Remove Iron And Copper From Pool Water
You can use a product called Copper-Zinc to remove copper and iron from your pool water.
Copper-Zinc is a liquid formulation used to remove copper and iron from the water and other pollutants that may be in your pool. You add a little bit of it to your pool water, wait for it to react, then rinse it out with fresh water.
This product can be used on any size pool. Using natural enzymes found in the earth’s crust breaks down pollutants before they can harm your pool.
How Does It Work
Operation of this tool is pretty simple. A sort of pump action causes it to work, and it will act as a regular pump to suck up water with each hand motion, or as a siphon to continue water flow after a single motion.
The difference is that you never had to touch the water, suck on the hose, or use any special movements or techniques in order to begin the flow. The fool-proof action requires no trial and error, and ensures that you will get the siphon started no matter what your expertise level is. What is similar is that as long as plant matter and other gunk is small enough to go through the hose, it will not clog things up, or cause problems as you work. As an up side, if you have small amounts of water left over, this is the only method that can effectively deal with it. At a certain point, the siphon will stop, and the water will no longer flow. When this takes place, just switch to a regular pumping action to pull the remaining moisture up and off the cover. When using this tool, youll remove more water with less effort, and youll finish the job with ease.
Also Check: Build Your Own Inground Pool
Manually Remove Debris From The Pool
Attach a leaf net or flat skimmer to your telescopic pole and remove all the leaves, twigs, and other debris from the waters surface.
If leaves, twigs, and other debris have accumulated inside the skimmer and pump baskets, the filtration system wont work properly when you turn it on. Use a pool skimmeror your hands, if necessaryto get everything out of the baskets as well.
How To Properly Remove An Inground Pool
A Glendale, Missouri home had an inground gunnite pool installed in 1964 . When Mosby Building Arts clients bought the house over 20 years ago, the family was thrilled to have a pool. It brought countless hours of fun and maintenance.
With the children grown and moved, the pool was used less often and became a huge maintenance issue that was facing upwards of $30,000 in repairs. Longing for a lower-maintenance backyard, it was time to remove the pool, replace the railroad tie retaining wall, and install a new paver patio.
There is a quick way to fill in a pool. There are plenty of Youtube videos showing a one-day job from demolition to newly level yard. What those videos dont show is months or years later when the ground begins to settle, or sink holes appear, or improper water drainage creates a swamp.
There is a proper way to remove and fill an inground pool to avoid future headache, damage and expense. The following photos show the steps.
The Mosby construction crew began, with a bobcat, breaking up the surrounding concrete deck , and poking holes in the walls and floor of the gunnite pool. This is so collected water from the surface and underground moisture can flow freely and drain properly.
The gunnite and concrete debris is pushed into the pool to help fill the hole . This reduces the amount of gravel and soil filler needed, and reduces the expense of hauling off debris. Its smart to recycle these materials.
Recommended Reading: Iron Out Pool Treatment
When To Drain A Pool
Weather conditions need to be nearly perfect in order to drain a pool. Pool pros suggest 85 degrees is the best temperature to drain a pool. In-ground pools can blister or crack when drained in high temperatures.
The ground should be dry and you should drain a pool when the forecast doesnt include rain before or after the day you drain the pool. In-ground pools should not be drained after rainy weather because it can result in the bottom of the pool rising out of the ground.
How To Clean A Green Pool
Green pool water is often caused by the presence of algae in your pool. Learn how to treat algae and get rid of green pool water.
Green pool water is often caused by the presence of algae in your pool. Algae blooms can appear when your pool has a low Free Chlorine. Exposure to high heat, heavy rain or poor circulation, without the use of a preventative algaecide, also increase your risk of developing pool algae. Stubborn pool algae can be hard to control if the appropriate steps arent taken to properly treat and prevent the problem. Follow these steps to treat and prevent green pool water.
Test and Balance Water
Always begin by testing your pool water. Your test results will tell you if your water parameters are unbalanced. Pay special attention to your Free Chlorine level. Low Free Chlorine can cause your pool water to turn green. Always maintain Free Chlorine between 1 -4 ppm. If needed, apply the appropriate chlorine and sanitizers to restore adequate sanitizer levels.
Clean Pool Water and Surfaces
Skim water surface to remove visible debris, brush walls, vacuum and empty skimmer baskets. Concentrate on areas with visible dirt and little or no circulation. Cleaning your pool regularly is an effective step to prevent algae growth.
Apply a Shock Treatment
Crystal clear water starts by applying pool shock. Shocking your pool water helps to remove contaminants that may cause algae to grow and helps to improve water filtration.
Apply an Algaecide
Also Check: Diy Inground Swimming Pool
Draining Pool Water Using An Electric Pool Pump
To drain your pool water using an electric pool pump, follow the steps below:
Siphoning Water From The Pool
If you dont have a multiport valve, drainage port, or a submersible pump, you can siphon the water from the pool if you can create the elevation difference and initial flow needed to start the process.
To create a good siphon, position the exit end of the hose at a lower elevation than the pool, then create the initial suction needed to start the water moving. You can do this by sucking on the hose if its empty, or by filling the hose and sealing it with a nozzle until you are ready to start siphoning. When your hose is full of water, with one end in the pool and the sealed nozzle where you want it, remove the nozzle to begin the siphon.
Don’t Miss: Can Lice Live In Swimming Pools
How Long To Drain An Inground Pool
A small pool will take about 6 hours and a large pool over 12 hours. This really depends on the volume of the pool and what pump you are using. The important thing is to keep monitoring the process. I dont recommend draining overnight as you may leave the pump to run dry causing damage or you may cause an unexpected flood.
Can You Put Antifreeze In Your Pool
Swimming pool antifreezeantifreezethecanswimming poolit canswimming pool
. Also asked, how much antifreeze Do I need to winterize my pool?
The standard advise is to use one gallon of pool antifreeze for every 10 feet of 1.5 inch pipe, assuming your pipe is full of water. If you are adding it to an empty pipe or nearly empty pipe, you can use much less.
One may also ask, how do you get antifreeze out of pool lines? Removing Antifreeze From the Inground Pool Lines
do you put antifreeze in above ground pool?
It will gum up a pool filter. I repeat, do not use antifreeze in your equipment. If your pump sits below water level and you have concerns, just leave the drain plugs out all winter, or remove the pump and store it indoors. Pool antifreeze is not for the pool, but for the pipes.
What happens if you don’t winterize your above ground pool?
Liner DamageBoth above ground pools and in-ground pools have a protective liner that holds the water in and prevents the foundation of your pool from sustaining damages. Harsh weather conditions throughout the winter can potentially create new cracks in the liner or expand them further as ice begins to form.
Also Check: Unclogging Pool Pipes
How To Drain And Refill Your Swimming Pool
wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 19 people, some anonymous, worked to edit and improve it over time. This article has been viewed 659,050 times.Learn more…
Swimming pool water can get bad over the years so bad that chemicals lose their effectiveness. With this information and a free weekend, you can drain and refill your pool without spending much more than $200 .
Consult Your Local Water Authority First
If you just start siphoning water out of your pool with a garden hose, you could end up costing yourself a lot of time, money, and grief. Many municipalities have their own rules about how, when, and where someone can drain their pool, and you need to abide by those rules.
For instance, most municipalities will require you to run your pool water through your homes sewer cleanout line so it will flow to a water treatment plant. Others might allow you to send all that water down the storm drains that line your street. Municipalities may also have water chemical composition regulations. Some may require the water to be chlorine neutral, which would necessitate a lot of chlorine neutralizer.
You May Like: Pristine Blue Pros And Cons
How To Remove Water From Ears
This article was medically reviewed by Luba Lee, FNP-BC, MS. Luba Lee, FNP-BC is a board certified Family Nurse Practitioner and educator in Tennessee with over a decade of clinical experience. Luba has certifications in Pediatric Advanced Life Support , Emergency Medicine, Advanced Cardiac Life Support , Team Building, and Critical Care Nursing. She received her Master of Science in Nursing from the University of Tennessee in 2006.wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 29 testimonials and 81% of readers who voted found it helpful, earning it our reader-approved status. This article has been viewed 6,422,008 times.
People often get water stuck in their ears after going for a swim or taking a bath, especially in the summer months. While water in your ears can simply be unpleasant, if you don’t remove it or it doesn’t drain out on its own, then you may have to deal with the inflammation, irritation, or infection of your outer ear and ear canal, which is also known as Swimmer’s Ear. Luckily, it’s often easy to remove water from your ears with just a few quick tricks. If treating it at home doesn’t work and you experience ear pain, then it’s important that you see a doctor as soon as possible.
How Do You Clean Fountain Rocks
How to Get Hard-Water Lime off a Rock Fountain
Also Check: Pool Window Alarms
Turn On The Pump And Filter
You want to get the water circulating again to remove all the contaminants too-small-for-the-skimmer bits of debris the rain introduced into your pool.
Note: If youve lost power due to the storm, youll obviously have to wait to do this step. But you still want to manually remove all the debris you can. If you leave it too long, itll sink to the bottom of the pool, and youll have a lot more vacuuming to do later.
What Is An Elephant Cover
One other option for getting water off of your pool cover is to prevent the water from ever building up. This can be solved with an elephant cover.
So what is an elephant cover? Surely youve seen the ads. The pool cover stretches over your in-ground pool and the water fall off to the side. The cover is so strong that an elephant can stand on it. They are also known as safety covers.
- Safety: If you have pets and/or small children, this is a great way to ensure that no one falls through your pool cover.
- Low maintenance: Water and leaves cannot collect on top of the cover, so you can avoid the maintenance.
- Appearance: In order to install the cover, it is necessary to drill holes into the surface surrounding the pool. This means drilling holes into the concrete. We have pavers around our pool, and did not want to risk drilling into the pavers. We were also concerned about having open holes when the cover is off.
- Price: We just looked that the prices again, and they are steep. The cost of a cover to fit a popular 16 x 36 in-ground pool is $700-1500. We found one for $1200 with a 12-year warranty. A standard mesh cover is $90-200, and can last from 3-10 years. We found one for $199 that came with a 16-year warranty.
Here is a sample safety cover for a pool. Click on the link to see various sizes, costs, benefits and features:
So as you can see, there are several options for removing water from a pool cover. Happy swimming!
Don’t Miss: Cary Ymca Pool
How To Drain Your Pool
There are a few things to keep in mind in order to drain your pool safely. Never use your pool pump to try to drain the pool. Inevitably, you will pull air into your suction line, the pump will lose its prime, and you will damage or burn up your pump. Always rent or purchase a submersible pump to drain the pool. Remember to turn off the electricity to your pump and pool light.
After removing the old water, you can refill the pool with a garden hose. The usual amount of time to entirely refill a pool is 14-16 hours with two hoses.
DIY TIP: To fill the pool quicker, use two hoses if you have them available.
Test your water immediately after refilling to balance andadd start-up chemicals. You can also take a water sample into a Leslies store for testing. Leslieswill test your water and provide the results with a prescription for improvingyour water quality.
Not sure if your pool needs draining or have other questions? Visit your local Leslies store to ask an expert. We are here to help you every step of the way.