How Much Does It Cost
Simply call to schedule your pool filling with at least 48 hours notice. We will estimate the amount of water needed based on your pool measurements. On the day of the delivery, your first truck will show up at the scheduled time, park on the street and run a hose from the tanker truck to your pool.
Then the fun begins.
Our truck will begin pumping away filling your pool in just a short period of time. Once complete, the next truck will be dispatched. We use either a 4000 or 6200-gallon truck requiring at least two trips to smaller pools, more for larger. As the pool fills, our driver will watch for potential issues . Soon your pool will be full and ready for swimming .
Cleveland summers are short, and we recommend you not waste a single second of it. If you can buy more time by finding a better way to fill your pool, take it.
How To Fill Your Pool The Convenient Way
A professional;water hauler;can have your shiny new pool filled with high-quality water in a matter of hours. The best part is there will be absolutely no effort on your part. In addition, this is a great way to check for any potential problems. With a hose, a set it and forget mentality is being used. No one watches it and issues are not detected until it is too late. When you hire a water hauler, there is a watchful eye looking for leaks and any other issues.
When youre thinking about whether you should fill your pool with a water truck or hose, remember that with a water hauler youre not just paying for the water. To provide even further assurance, it is always a good idea to have your pool installer present with at least the beginning of the first fill. That is simply not possible with a garden hose due to the amount of time it would take to fill.
Why Shocking Is Important
Unfortunately for pool owners, you cant just fill up a pool with water and expect it to always be clean.
Due to outside influences, the state of pool water is constantly changing, becoming increasingly grimy with each passing second.
Even though pools have a constant sanitizing agent in the water, over time it breaks down and slowly becomes less effective. At this point you need to add more of it if you want the pool to remain clean.
The idea behind pool shocking is to quickly raise the free chlorine level in the pool, killing off bacteria, algae growth, chloramines, and other pathogens in the water. This can be done using either chlorinated or non-chlorine pool shock.
Chlorinated pool shock is the most common. It gives the pool a massive dose of chlorine, killing everything in its path.
Non-chlorine pool shock is an oxidizer that attacks organic contaminants in the water. By focusing strictly on those, it frees up the free chlorine in the pool so it can be more effective in sanitizing the water.
You May Like: How To Cancel With Blue World Pools
How To Reduce Water Loss In A Pool
Once youve spent all that time and money to fill your pool, you probably want your investment to pay off as long as possible. Also, testing and balancing a pool takes time and effort, and you dont want to simply waste your high-quality water. Here are some ways to keep all that water in your pool where you want it:;
- Reduce evaporation. Evaporation will take about ¼ to ½ inch of water a day in an uncovered pool. Reduce evaporation by keeping the pool covered when it isnt in use, lowering the temperature on a pool heater, and using landscaping or barriers to protect the surface of your pool from wind.;
- Reduce splashing. Every time someone leaves the pool, they carry water on their bodies, swimsuits, and in their hair. Diving, playing, fountains and water features, can all contribute to more splashout. To reduce splashout, keep the water level a bit low to prevent water from sloshing out over the side, and check the spray force and direction of fountains or waterfalls to keep them flowing back into the pool.;
- Mind the backwash. Depending on the kind of pool filter you have, you may need to periodically backwash the filter to keep it clean. While cleaning the filter is necessary, and healthy for your pool, only backwash for as long as necessary, and stop the moment the water runs clear. And keeping your pool water balanced and sanitized will reduce strain on your filter, so you wont need to backwash as much or as often.;
Creative Ideas To Filling In Your Swimming Pools: Really Cool
In case your pool becomes an expensive affair in terms of maintenance, or you no longer need it, you might consider doing away with it by maybe filling it up and planting grass. However, while this might be a viable option to dispose of your pool, there are better outdoor concepts you could adopt. You can transform the pool into something useful. Turn the pool into a useful expense-free area that your family can still enjoy. And whats more, you will not have to deal with the chemical treatment of your pool anymore.
Don’t Miss: How To Clean Pool Plaster
Save Time Invested Into Off
Many homeowners do not realize that their pools require maintenance even in the off season. The pool must be covered, cleaned, and sometimes refilled over the fall and winter to keep it clean and ready to use the next summer. Removing a pool eliminates these extra chores, which can easily be forgotten when you are more preoccupied with bundling up than with going for a swim.
What To Do If The Water Goes Brown
If you decide to fill your pool using your well, keep checking the color of the water. If you suddenly notice the water coming out of your hose, or inside your home goes brown, immediately stop filling. You may notice your well will recover and the water will quickly clear up.
However, if you continue to notice brown or discolored water, you may have a more serious problem and need a professional opinion.
Don’t Miss: Pool Sealer Concrete
Full Collapse And Engineered Fill
The only surefire way to declare your area buildable is to undergo this procedure. A full collapse with engineered fill is exactly what you think it is.;
Your contractor will remove every last trace of your pool and backfill it, complete with the assistance of an engineer.;
While this is the most expensive option, its also the best procedure. Having your area declared buildable, you wont have to worry about compromised home property values or other problems.;
Do You Need A Permit To Fill In A Pool
That depends on your local government, but in many cases, a permit is required.
The cost of a permit can be anywhere from free to several hundred dollars;depending on your local municipality.
Many local governments have rules regarding how a pool must be removed. Some may have zoning ordinances or codes stating that a pool must be completely removed, not just filled in. If partial pool demolition and removal is allowed, there may be specific protocols on how the pool must be filled in
Read Also: How To Vacuum Intex Above Ground Pool
What To Do While The Pool Gets Filled And What To Do Afterwards
Keep an eye on your pool while it is filling up. Make sure the liner isnt coming loose and that theres no moisture anywhere around the pool. Also, make sure that you install all of the top rails of the pool and connectors before the pool is more than halfway full. It can be much harder to install these parts after the pool has been filled.
You can take a water sample to a pool store so that they can analyze it and you can get the chemicals it needs for the start-up. You can shock the pool when its at least half full, but I would wait until its completely full because you can then turn on the pump and run the filter.
Cost Of Pool Maintenance Service
Are you paying $100 or so weekly for a pool service company to come by and clean out your pool, maybe check the filter and water levels? That’s $400 per month, which can be $5,200 per year if the pool water stays in the pool throughout the year. In three years, that’s $15,600 to keep the pool clean and;maintain pH levels. Never mind repairs.
Maybe you do the pool maintenance. Would you rather be doing something else?
Don’t Miss: 3 Chlorine Tablets Costco
How Full Should You Fill An Above Ground Pool
above ground poolfilledpoolpool
Ideal Water HeightMost pool professionals agree that the water level in both in-ground and above–ground pools should be at the midpoint of the pool skimmer. The skimmer is responsible for providing a pathway for water to flow to the filter where it is cleaned.
One may also ask, what happens if pool water level is too high? If the water level is too high the debris floating next to the opening may pass by without being pulled into the skimmer. However if the water level is too low it may cause the skimmer to suck air into the system. If this happens you may run the risk of burning up your pool pumps motor.
Similarly, you may ask, how full should I fill my Intex pool?
Intex Frequently Asked Questions
|Up to the fill line which is approximately 80% full.|
|Question :||How high is the pool?|
|Answer :||The 10′ and 12′ pools are 30″ high and the 15′ pool is 36″ high.|
How do you fill a large pool?
Fill your pool until the water reaches about the middle of a surface skimmer, covering the pool water filter inlet slightly. This may take from a few hours to a couple of days, depending on if you are using a garden hose or having your water delivered.
Save Time And Hassle When Filling Your Pool
Now that you know the difference between filling your pool with a water truck or a hose, you can make the best decision for your summer. At Distillata, our pool filling service saves you time and hassle. Request a pool filling quote today to get started!
Dont get me wrong, people have been using the hose option for years and it is certainly sensible, but people often forget about the second option. A water hauler.
Recommended Reading: How To Lower Cya In Pool
Pool Removal Backfill Processes
Backfilling an inground pool is more cost-effective than removing the pool entirely. Pool removal is often overseen by a licensed engineer. Using a licensed engineer provides a few benefits to home-owners. If an engineer oversees the process, the area is considered suitable for new structures and the previous pool does not need to be disclosed to potential buyers. However, if an engineer is not involved, homeowners cannot build new structures in the area and must disclose the pools existence to new buyers. If the pool is not fully removed, in some cases, it must also be disclosed. Check your local regulations before making any decisions.
How to fill in an inground swimming pool:
As an alternative to backfill, you can remove the pool completely. This is much more expensive, but allows the pool materials to be hauled off versus remaining buried.
Filling In A Pool With Concrete
Pool companies will not fill in a swimming pool with concrete, as the cost is far higher than it is to fill a pool with dirt. However, a partial removal involves filling the pool with the broken-up concrete from the demolition, which is cheaper and requires less dirt.
A full swimming pool demolition is required if you are looking to build a new structure afterward. Installing a concrete slab costs$4 to $8 per square foot once the pool is filled in.
Recommended Reading: Should You Run Pool Pump 24 Hours Day
Inground Pool Removal Costs
There are two main methods for removing an inground model: demolishing it wall-by-wall or filling it in. Filling in is more cost-effective than removing it entirely. You can spend anywhere between $9,000 and $19,000 to physically remove a swimming pool, while covering one runs an average of $5,000.
The most common way to eliminate an inground is to conduct a backfill, either overseen by a licensed engineer or independently. This process requires:
- Draining all the water.
- Tearing down and removing the floor, walls, and materials, such as concrete, vinyl, rebar, etc. Concrete removal costs most homeowners between $500 – $1,500.
- Smoothing over the filling with compacted topsoil.
Your pool’s material will also impact the cost of labor:
- Fiberglass and vinyl: These need to be cut before being dismantled and taken away, and are generally less expensive to work with.
- Concrete and gunite: These are the most expensive materials to have removed, since they’re heavy and need to be broken down before being taken out of the ground and off-site.
Using an engineered backfill is the most expensive option, but it also usually means that the city will allow a homeowner to build another structure on this area since it was done by a professional. Additionally, you won’t have to disclose that a pool ever existed to prospective buyers.
Hire a Pool Demolition Expert
Convert Your Pool Into A Pond
While you might want some water in your compound for outdoor aesthetic reasons, maintaining a pool or remodeling an old one can be an expensive engagement that you would not want to incur. However, you can convert your pool into a less expensive pond.
Converting your pool into a pond is not difficult, but it calls for some adjustments:
- You need to add a filtration system
- You need to choose suitable plants and animals for your pond
- If you still want to take a swim in the pond, get an eco-friendly water feature.
Read Also: Ccs Polypropylene Mesh Tarps
Get In Touch With The Pool Removal Professionals
If you would like to safely and efficiently remove an unwanted swimming pool, get in touch with the pool removal experts at Dirt Connections. They are experienced in filling in and demolishing all types of swimming pools and can leave your yard in optimum condition for whatever you have planned for the space in the future.
How To Fill Your Swimming Pool With Water
Here are the seven standard steps to fill your swimming pool with water:
Step 1.;To fill up the pool in the standard way, you will need to connect a hose to your outdoor spigot. Some homeowners with multiple spigots use additional hoses to speed up the process.
Step 2.;Start with the pool .
Step 3.;Be careful that you DO NOT create a permanent ring by stopping the water too early. This issue typically arises because people want to leave their homes or go to sleep. If that is the case with you, simply decrease the flow of water while you are away.
Step 4.;It is important to understand;swimming pool water levels;to not stop the water too early. Keep the water running until it is halfway up the pools waterline tile. The surface should be approximately 3 inches below the edge of the pool.
Step 5.;Now switch to the spa. You can turn off the water when the spa overflows into your pool.
Step 6.;Once the water is in the pool, you can add chemicals and turn on your filtration system.
Step 7.;Wait 24 hours after the addition of chemicals. Now the pool is safe for swimming!
Recommended Reading: Where Is Doheny Pool Supply Located
What Is The Procedure For Filling In A Pool
Filling in a pool is the most affordable option when it comes to inground pool removal. It is also a faster process than other options. It entails draining the pool completely and punching holes in the bottom of it.
Then, the top layer of the pool is demolished anywhere from 18 to 36 inches. Rubble is placed in the bottom of the pool, and then it is filled in with additional dirt and topsoil.
Finally, the soil is compacted, and the yard can be used as desired. The entire process can be completed in less than a week in many cases.
Filling A Swimming Pool With Expert Guidance
At Olympus Pools, we work with our new pool owners to walk you through the pool filling process. Were also here to help you before, during, and after your purchase to answer any questions you may have. We highly recommend any pool owner who has questions regarding their pool maintenance, including water levels, contact their pool builder or a trusted pool maintenance company in their area.
You May Like: How Do I Vacuum My Intex Pool