Tuesday, June 11, 2024
HomeGroundCan You Install An Above Ground Pool In The Ground

Can You Install An Above Ground Pool In The Ground

- Advertisment -

Choose The Size And Shape Of Above

Above Ground Pool Installation In Ground Time Lapse DIY Project

The size and shape of the pool are important since these factors affect the cost of the pool and its maintenance, as well as its ability to fit well within your yard.

The size of the available space helps to determine the eventual size of the pool. The cost of water should be figured in, too, since treated water comes at a cost for all municipal users.

Above-ground swimming pools range from small wading pools to large round, oval, or rectangular pools.

Cost to Fill Above-Ground Swimming Pools by Size

Based on 2021 findings from Home Guide.

Above Ground Pools Sydney

Sydney offers a warm and pleasant climate nearly all year round, and any backyard in the area will benefit from an above ground pool. Because there is plenty of sunshine, the most efficient way of heating your pool in the cooler months is with solar heating, so you may want to factor this into your budget.

Find out about the safety standards regarding pool fencing and gating for the Sydney area before you start. You can find out the details here.

The final piece of the jigsaw is to contact your local authorised Compass Pools Australia pool builder, who will start making your pool dream a reality.

For Sydney South try Local Pools and Spas.

Get In The Water Faster With These Tips For Installing An Above Ground Pool Should You Diy It Or Call In The Pros

If you were hoping to install an above ground pool in 2020, you may well have found it impossible.

Across the U.S., people stuck at home during the pandemic turned to swimming pools, as families put a lot of the money they didnt spend on vacations into their backyards. Whether that meant an inflatable kiddie pool, a more substantial above ground pool or the in-ground pool of their dreams, the result was the same a pool shortage. Manufacturers couldnt keep up with demand, and pool installers found themselves booked into 2021.

While inventories have improved for 2021, its still a good idea to plan ahead if you want to install an above ground pool this year. Lets take a look at the practical aspects of above ground pool installation, and whether its a realistic DIY project.

On This Page

You May Like: Can You Finance An Inground Swimming Pool

Tips For Filling Your Pool

  • Fill the pool half way first and then install the skimmer and filter according to manufacturers instructions.
  • Install the safety warnings because your warranty could be voided if you dont add these labels.
  • Apply the safety warnings before filling your pool to the top.
  • The water level should be one third to half way up the skimmer.
  • If you have any questions, concerns or need assistance contact Pool Supplies Canada to speak directly to one of our pool installation experts.

    With these steps you are now ready to install your own Above Ground Pools

    How Much Does An Above Ground Concrete Pool Cost

    Pin by DOMINIQUE GROLET on pool ideas

    Heres the bad news – your above ground concrete pool is going to cost more than an inground concrete pool. It isnt easy to say exactly how much more, but if the price is a major factor for you and you have the option to do either one, an inground construction might be the better choice.

    Like a semi inground pool, an above ground concrete pool needs retaining walls to sustain the pressure from the thousands of gallons of water. Retaining walls can get pricy , so thats where most of the added cost comes in.

    The price can vary by wall height, material, and thickness, but in general, you can expect to pay an additional $28,000 to $80,000 to build your concrete pool above ground .

    You May Like: How Often Should You Clean Your Pool Filter

    Pros & Cons Of Putting An Above Ground Pool On Pavers

    Generally speaking, it is not a good idea to put an above ground pool on pavers. However, there are both pros and cons to doing so. It may so happen that in your specific case, the pros outweigh the cons. In which case, you can still decide in favor of putting your above ground pool on patio pavers.

    Make The Slab At Least One Foot Bigger All The Way Around Than The Size Of The Pool

    Dont try to make the slab perfectly sized with the pool. Above ground pools arent Swiss watches. They often are not made with exact dimensions and are usually installed imperfectly shaped.

    Using a 24 round pool as an example youll ideally want to pour a 26 round slab. This will give you a nice extra ledge all the way around the pool. And it will give you plenty of room if the pool goes up a little egg-shaped.

    Recommended Reading: Are Pool Heat Pumps Worth It

    Roll Out And Install Liner

    Time to unroll the liner inside the pool. The trick here is to lay it at the center of the pool and unroll from there.

    Pro Tip: If it’s a sunny hot day, which is the best day to install, open the liner box and open it slightly so that your liner gets hot. This will make it stretchy and it will be easier to install.

    This is best done with 2 people inside the pool. Bring it over to the walls and clip it inside the bead track. Your friends outside should help with clipping it all around.

    Onces it’s clipped everywhere, using your feet, try to spread the bottom to flatten and get closer to the wall.

    You should start bringing in water now. Pour in about 2 feet of water and stretch the liner to remove any creases as it is filling. If you don’t remove it now, it will stay forever.

    Pro Tip: Get a water truck delivery. The Garden hose will take lots of time to get to that first 2 feet, which is essential to completing the installation.

    Features Of An Above Ground Fibreglass Pool By The Fibreglass Pool Company

    Tutorial: How to install your above-ground pool yourself

    Our entire collection is suitable for above ground installation

    They are compatible with every type of sanitising system

    We have one of South East Queenslands biggest ranges of fibreglass pools

    Our pools have innovative features such as safety steps and edges as well as tanning ledges

    Extremely long lasting and come with a generous lifetime internal, structural and osmosis warranty.

    Manufactured to exceed national and worldwide pool building standards

    Don’t Miss: Why Are Pools So Expensive

    Can You Bury An Above Ground Pool

    A question we hear from time to time is whether or not above ground pools can be installed as in-ground pools. The short answer is yes, but the longer answer involves several conditions. Not just any pool can be buried, and not just in any area, and not just to any shape or depth.

    First, you need to make sure your above ground pool is built to be buried, as not all are. Of the brands we carry, the Doughboy Palm Shore model can be buried, either fully recessed or with a semi-in-ground installation.

    If your backyard has the right composition and configuration, you can choose the installation style that best fits your lifestyle.

    Note: The Doughboy Palm Shore is the only Doughboy model that can be completely buried AND is backed 100% by warranty.

    Ii The Hole Has To Be Bigger Than The Size Of The Pool

    Above ground pools are assembled on site. They cant be pre-built somewhere cool and then helicoptered in and set down into a hole perfectly. The thing has to be built in the hole so more room is needed. As a guideline, if the pool is going two or more feet down, make the hole 1.5 bigger than the size of the pool all the way around. EXAMPLE: A 24 round pool should have a hole that is at least 27 in diameter.

    Make sure the bottom of the hole is the desired size and not the top. I know that sounds stupid, but its not. A lot of times, holes get dug with a starting top dimension of 27 round and by the time the hole is two feet down, its dimension has tilted in and it ends up being a 26 hole at the bottom. Additionally, if your earth is really sandy and loose, it may be a good idea to make the hole even bigger. Theres little more frustrating than building one of these pools in a hole and it caves in on you halfway through with loose earth.

    Also Check: How To Make Pool Water Blue

    What You Should Know Before Buying And Installing An Above

    Swimming pools are a big part of the Australian home. They provide a welcome relief during the summer months when the temperature reaches 40 degrees. It is estimated that 920,000 pools have been installed across Australia since 2015. Perth leads the number of residents living in a household that has a swimming pool with 18%, followed by Queensland with 17%, Sydney with 16%, and Brisbane with 15%. Another 20,000 pools are added each year across the country, not including inflatable pools.

    Sinking An Above Ground Pool Partially In The Ground Will Not Cause Any Premature Or Added Rust/corrosion

    8 Simple Steps on How to Install Above Ground Pool All by Yourself

    When it comes to rust, people have all kinds of opinions. And when their pool gets rust, they are quick to blame things that may or may not have anything to do with it. A pool being partially in the ground is usually a quick blame for why a pool got rust. And in most cases, that had nothing to do with the corrosion.

    I have installed and worked on above ground swimming pools for 34 years. I have seen thousands of pools partially in the ground and I have seen thousands of pools that got rust. In all that time, I have not been able to link rust or corrosion with a pool being in the ground at all.

    I know common sense will tell some that something metal being in the ground will cause it to corrode and if I didnt know better, I would make the same conclusion with that same logic. My extensive and long-term observation suggests otherwise though.

    In Central Florida , there are areas that are and stay very wet, and there are good high and dry areas. I have seen pools partially in the ground at every moisture level. Some have rusted quickly and some never got a speck of rust. And that variation had nothing to do with how wet the earth was or stayed.

    In truth, I or no one else really knows why some pools rust. Sometimes it very apparent and sometimes I cant even guess. I can say though, that an above ground pool being partially in the ground usually has nothing to do with it rusting.

    Don’t Miss: What Is The Best Manual Pool Vacuum

    Cost To Buy An Above Ground Pool In The Ground

    All the pools mentioned above cost about the same. It might interest you to know that the best semi-inground pool is usually the cheapest. That is the Aquasport 52 this is why I dont sell the other pools.

    • A 24 Round Package Cost $5000.00 $6000.00
    • 15×30 to 17×32 Oval Package Cost $6500.00 $7500.00

    Pouring A Concrete Pad Specifically For An Above Ground Pool Versus Installing One On An Existing Slab

    Deciding to pour a concrete slab for your future above ground pool is a nice decision. With a pool on concrete, you dont have to worry about nutgrass, moles, or any earth dynamics causing issues. There are a couple of drawbacks to it, but for the most part, its a solid way to go.

    Most thinking about installing their pools on concrete are doing so because they have some kind of existing patio or slab in the yard. Using an existing concrete slab is often problematic though.

    Unless youre a concrete person, you may not realize that most concrete patios or outdoor slabs of any kind are considerably off level. This is because any outdoor hard ground surface needs to have a gradual drop-off to allow rainwater to drain off of it.

    When most people look at their existing concrete slab, it looks level. Ive had more than a few people call me out to build their above ground on an existing slab. When I talk to them, I explain how most slabs or patios are too off-level to install a pool on, but they will assure me that they checked and the concrete slab in their backyard is level.

    When I get to their house to build the pool, Ill pull out my laser level and show them that the deck that they insisted was perfectly level, is off quite a bit.

    You May Like: How To Clear Cloudy Swimming Pool Water

    Strong And Long Lasting

    Fibreglass technology has come a long way in recent years. Innovative construction enables fibreglass pools to have extreme tactile strength and durability that can be installed on virtually any site. They are skilfully designed to be able to accommodate earth movements without the risk or cracking or splitting. They will last just as long above ground as they do if they installed inground. Many reputable fibreglass pool companies offer generous warranties with their pools as they are so confident in their quality.

    Build The Bottom Ring:

    How to Install An Above Ground Pool // Intex

    Follow the instructions that come with your above ground pool package as each type, brand and size of pool have different instructions. In general, you will be using your plates, stabilizers and rails. Here are some tips to identify each piece:

    • Your plates will be made of metal or resin
    • The bottom stabilizer should be crimped on one side. It has smaller rails
    • The bottom rail is straighter and larger than the stabilizer.
    • Lay out the pieces and assemble as instructed. Generally, you will be sliding the bottom rail into the bottom plate up to the dimple on the plate.
    • Remember to measure the bottom track in several locations to ensure that the pool is truly round and the correct size. If the size is correct, stake the ring into position. If not, contact Pool Supplies Canada immediately.On oval pools make sure diagonal measurements match . Double and triple check the diagonal measurements and keep doing this over and over.

    You May Like: Best Hot Tubs Consumer Reports 2021

    Above Ground Swimming Pools Installation: The Process

    When installing a swimming pool in your yard, whether its inground or above, you dont want to take any risks. Thats why you should always hire a professional company to assist. At Narellan Pools, we take pride in our work and we can complete the installation process, from start to finish, keeping you updated along the way.

    Next, you need to apply for council approval to make the changes to your yard, and you also may need to register your pool with your State Government. You should also remember that pool fencing is required around all pools within Australia that are deeper than 30cm so take that into account when deciding the location and budget for your pool.

    Once you have decided on a location and have the approvals in place, your Narellan Pools pool builder will clear the area and level the site before covering it with sand to better grip the pool. Next, well arrange the framing, including the walls of the pool and any supports for decking and walkways. The best thing about our fibreglass above ground pool shells is that they are already manufactured as a single shell so installation is the easy part.

    And the final step, fill it with water and ensure you use the right chemicals to get the water healthy and ready for swimming.

    Above Ground Pool Buried In The Ground

    There are a few brands of above ground pools that can be complete recessed like an inground pool. One of my most inexpensive inground pool packages utilizes the Aquasort 52.

    You can put any pool inground if the pool wall is strong enough. If you are going entirely inground, you will need an inground skimmer and an inground pool pump. Above ground pumps are not self-priming.

    Recommended Reading: Where To Buy Above Ground Pools

    Questions On Sterns Above Ground Pools

    Here are some commonly asked questions regarding our Sterns range of Above Ground Modular Swimming Pools…

    Q. What is a modular pool?

    Simply speaking, a modular pool is a pool that is put together in a modular way. We have set sizes and shapes that we manufacture and these can be increased by a set modular distance. Modular pools are a perfect alternative to concrete and fibreglass pools, particularly for difficult sites. Engineered for maximum strength, Stern’s Pools products are streamlined and designed to fit with in-ground, above- ground and semi-in-ground installations. The popular braceless pools are sleek and, when installed in-ground, achieve the same appearance as a concrete pool. With the benefit of easy installation, a pool from Stern’s Pools can be set up in as little as a day by a professional installer. This simple process removes a lot of the expense and construction time associated with concrete pools or the logistical challenges of a fibreglass shell, so you can begin enjoying your pool straight away.

    Q. What is the difference between a modular pool and an above-ground pool?

    Q. What is the difference between a modular pool and an in-ground pool?

    Q. How long do modular pools last in the ground?

    Q. How much do modular pools cost?

    Modular pools can be sold as either a DIY kit or a full install project. Your budget for a DIY kit could be as little as $3,000 with full install kits coming closer to $10,000.

    Q. What are Sterns pools made of?

    • Round
    • Raindrop

    - Advertisment -

    Most Popular

    - Advertisment -