Saturday, October 1, 2022
HomeGroundHow To Level An Above Ground Pool

How To Level An Above Ground Pool

- Advertisment -

Cyanuric Acid Levels Above 100 To 150 Parts Per Million Will Usually Require Draining At Least Some Of The Water To Start Over With Fresh Water

How to level the ground for an above ground pool

How to level an above ground pool without draining it. Thus is the easiest way i found to level the legs on my pool while i am putting it up every spring. Hold one end of the hose and submerge in water before pointing the other end downwards and making sure its lower than the submerged end. A winterizing chemical kit can help keep the water clear and blue for the upcoming season.

You should never try to lower the upper side when leveling your above ground swimming pool. But, you can correct this issue without taking the ground pool down. Tips on how to level a ground for pool without digging.

Below are some points to consider on how to level ground for easy set pool. Leveling a tilting pool is a breeze but its a temporary fix! Your ph, calcium hardness, and total alkalinity should all be balanced.

The best thing to do is to level the ground without removing the pool down. Lower the water level to just below the mouth of the skimmer. (in fact, it’s usually recommended to keep the water in the pool, though the.

You can use a bubble level to check the level of the legs if your pool is about 3 inches full. How do you level your pool without draining the water? Use the shovel to pry when you are done with the second step.

The pool is only half fool so as not to dent the metal fr. Maintain proper pool chemical levels throughout the winter. That is how to fix an unlevel pool without draining it.

How To Level Above Ground Pool Further Reading Trouble Free Pool

Oq5uigu1raidum

What Should Be Your Pool Level

Lots of people keep asking what the normal pool level should be but the truth is no swimming pool can be 100% leveled but you can get closer to a certain point. Based on the various installations and all knowledge gathered, the best pool level would be around an eighth of an inch for a square pool and quarter of an inch for an oval pool.

You should also be careful not to follow everything written in the instruction guide for most of them are written poorly.

What You Need To Level The Ground For Your Swimming Pool

The task at hand isnt too tricky. It can be tedious, but with the right tools on hand, the job will be made a lot easier and quicker.To level out the ground for your new swimming pool you will need:- A sod cutter/sod removing tool – this will remove a partition of grass and a thin layer of dirt- A long two-by-four plank of wood – A spirit level- A wide shovel- A wide rake- A lawn Roller – if you dont own one or cant borrow one you may need to hire a professional- Sand

Also Check: Hide Pool Equipment With Landscape

Use A Leveling Device

To level out the ground, you will need a levelling device. Use two-by-four plank of wood and a long spirit level to measure the evenness of the surrounding area.

A simple and easy method is to lay down the two-by-four on the ground, and then place the spirit level on top of the wood, attaching it with a cable tie if need be. The levelling device will help indicate which areas will need additional attention throughout the ground preparation process.

It All Starts With Prep Work

How to Level Ground for Above Ground Pool?

One of the first things you can do to make sure your above ground pool is level is to choose the right spot to set it up in the first place. Yes, the corner of your yard with the hill might get more sun but thats not the ideal area for an above-ground pool.

Make sure you choose an area with ample space thats as level as it can possibly be. You should leave at least three feet between the swimming pool and your home or any other structures on your property. Stay away from trees if you can as the falling leaves and branches will increase how often you need to clean the water. Drainage is important, too. You want to make sure youre not setting your pool up in an area thats prone to flooding or that gets a lot of drainage.

Also Check: How To Lower Cya In Pool

How To Fix It

Leveling a pool after it has water in it is very difficult. Some people will tell you that you have to empty the pool, disassemble it, and start all over at the beginning. This is why we stress the importance of using the appropriate tools to get the ground prepared, and double- and triple-checking that its level before you install the pool for the first time.

There is a way, however. It is a hard job that will take at least two people to do. Keep in mind when you take on this task that your goal is to get the majority of the weight off one side and evenly distributed throughout. It is impossible to get a pool with water in it perfectly level, so do the best that you can.

Since you will be handling rough material, we recommend that you wear a pair of work gloves to avoid any injury to your hands. They will also give you a better grip.

  • Hose

Can I Fix A Pool That Has Collapsed

Once your pool walls collapse, they cannot be fixed. You will need to replace the walls completely.

Walls that have buckled or twisted should be replaced as well. You may find some places that suggest you can solve your buckle problem using a wood block and hammer or placing a flat piece of steel on the inside to support it. However, these fixes are not permanent and may not even work.

Walls that have been compromised will eventually collapse over time and need to be replaced before that happens.

Read Also: Pool Tile Grout Sealer

Leveling A Filled Above Ground Pool With A Floor Jack

How to level an above ground pool with water in it. In this type of situation, one side is probably lower than the other. Determine which side needs leveling. Often, above ground pools fall out of level:

Fill the pool with water. Some above ground pools are designed to be directly installed over a grassy ground. Here is why above ground pool leveling is important.

In addition, it is preferable to leave the a good water level in the pool with rain and snow. With the assistance of another person, put a wooden shim at the base of the angle or foot of the pool. Drain your pool .

However, this job is a little hard and will need two people to do. If one side is an inch lower than the other, the water level will be higher on that side. An empty pool is also susceptible to collapse in high winds or bad weather.

Levelling just the legs won’t help since it’s the water in the liner that conforms to the shape of the ground, and you could cause the liner to start to tear at the seams from the legs being pulled away too far. Find the bottom connectors of the pool and adjust the distribution of height. At first, it may seem as if it were imperceptible.

Identify the sagging/tilting sides of the pool. No matter which method you choose, read all the steps before getting to work and make sure you have all the tools ready. To level ground for a pool, dig away slopes and high spots to make them level with lower areas.

Above Ground Pool Outdoor Pool Area Backyard Pool Coleman Pool

Pin On Pools

It Will Affect Your Pools Walls

Level your above ground pool with this one weird trick!

Its a given that an uneven ground will let water be concentrated on the pools lower areas. Because of this, the pool walls that bear the most weight will ultimately bend, get twisted, and collapse. Not only can this cause damage to your pool and property, injury can also happen.

If you think that this only happens to inflatable pools, youre sadly mistaken. This also applies to pools that have solid walls.

You May Like: Aria Pool Menu 2021

How To Level An Above Ground Swimming Pool

Related Articles

It is hard to beat the refreshment of jumping into a cool pool on a hot summer day. Cool refreshment is only possible when the pool is properly installed, nice and level. Above-ground pools need to be placed on level ground or you will find yourself with an unnatural shallow end to your pool. Besides being unsightly, an improperly installed pool is unstable. Not only do you risk injury to swimmers and bystanders in the event of a pool collapse, but you risk the end of summer fun. Take the time to level the ground the first time.

  • Hammer a metal stake where the center of the pool will be. Check with your building codes office to make sure you comply with local ordinances. For instance, some municipalities require pools remain a particular distance from property lines or existing buildings, including your home.

  • Tie a length of string about 6-inches longer than the radius of the pool to the stake. Tie a spray paint can to the other end of the string. Mark the perimeter of the area to be leveled with spray paint.

  • Remove all grass, sod and other vegetation from the marked pool area with shovels or a powered sod cutter. Use a wheelbarrow to move the debris away from the work space.

  • Remove the metal stake from the center of the pool area. In its place, hammer a 2-inch square stake, flush with the ground. Hammer the wood plank’s 4-inch nail into the center of the 2-inch square stake so it can pivot around the pool area.

  • Leveling Your Above Ground Pool Is Important

    Water weighs much more than we think it does. That weight can cause severe problems to even the toughest pools if they are not leveled correctly.

    When assembling your above ground pool, it is important to take your time during the leveling step. Skipping steps to save time will leave you with more work in the future.

    If your pool is uneven by 3 inches or more, it is important to immediately begin releveling the pool to prevent any damage from occurring. If damage has already occurred to your walls or liner, you more than likely need to replace them.

    Also Check: Clorox Chlorine Tablets Costco

    How To Level A Pool

    This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.There are 7 references cited in this article, which can be found at the bottom of the page. This article has been viewed 45,146 times.Learn more…

    Before trying to set up your pool, level the ground first so that the pool doesnt spill water. For a more secure and professional-looking installation, use paver plates to lift the pool on uneven soil. You may also level the ground by spinning a wooden beam, which is more labor-intensive but can be done anywhere with household tools. Although you can always call a professional for help, leveling is a DIY task that you can easily tackle on your own.

    Smooth It Out With Sand

    How should I level the ground for my above ground pool ...

    After leveling the ground, you need a truckload of sand. The sand creates a base, protecting not only the liner of your pool but to provide a buffer against grass and weeds, or any other sharp objects you may have missed in the dirt.

    Getting sand delivered is as easy as a phone call to a landscaping supply company or your local garden center. Ask for enough to create at least a 2-inch thick layer of sand across the entire area of your pool site, though if you end up with 6-inches or more this is totally fine.

    Once its been delivered, use a rake to spread the sand evenly, then give everything a good water, and leave it to dry. Id leave it overnight to flatten and dry out.

    You May Like: Cyanuric Acid Lowes

    Pro Or Diy Above Ground Pool Installation

    Though demand has eased since the height of the pandemic, pool contractors are still busy. So if youre planning to install an above ground pool this year, you might have to do it yourself if you want to be swimming by summertime. Whether you install the pool yourself depends on the type of pool and your DIY skills.

    • Inflatable pools. Installing an inflatable pool is usually as simple as finding a level spot on your patio or lawn, pumping up the pool, filling it with water and plugging it in.
    • Temporary above ground pools. Putting in a seasonal above ground pool is doable for most people with a few tools, basic DIY skills and a reasonably level backyard.
    • Permanent above ground pools. Installing a pool thats a permanent backyard fixture is an involved process requiring greater site prep and mechanics. Youll probably want a deck area surrounding the pool as well. The job can be done by an experienced DIYer, or you can pay for professional installation.

    Consider Using Mason Sand

    You can build a pool on soil that has had all the rocks removed, and you have ensured it is packed down correctly. However, many people opt to add a layer of 2-inches or more of mason sand on top of the soil before putting the pool up.

    Mason sand ensures that you did not miss any rocks or debris that could penetrate your liner. It is very fine sand that compacts well.

    Once you have put down the sand, level it out with a rake or shovel and add a little water to it so that it begins to pack down. Then leave it overnight to harden.

    The next day, be sure to pack down the sand thoroughly. You can do this by using a lawn roller or plate compactor. Once you have it packed down, take out your leveling device, and ensure it is still level. If not, move the sand around and repack until it is.

    Read Also: Pool Tile Cleaning Tips

    How To Level The Ground For Your Pool

    Above ground pools are an affordable alternative to inground pools, but you have to install it correctly to make sure it can last you for years to come. One of the most important considerations is having a level surface for your swimming pool to sit on.

    Below, Ill cover the step-by-step process to level your backyard and confidently install your above ground pool. Later in the article, Ill also discuss why its important to level the ground underneath your pool. Lets dive in.

    How Does Unlevel Water Damage A Pool

    How to level the ground for a swimming pool – (Easy Way)

    An average 15-ft round pool with a 52-inch wall holds a little over 5,000 gallons of water. That is a little over 41,700 pounds of water weight. When this water level is off by more than three inches, you will start to see problems due to the weight of the water with:

    • Damage to the liner

    These problems can lead to the overall collapse of even the best-built pools.

    Read Also: Painting Pool Cage

    Create Your Leveling Device

    Its no good to merely eyeball the pools location to ensure its level. If youre off by even a couple of inches it can cause significant problems once its filled with water.

    You need a leveling device. The easiest approach is to get a long, straight bit of board, and once youve placed it across the intended site for your pool, use a level to see how flat it is.

    Doing this will also highlight any high or low points on your site.

    If youve not got a bit of board thats long enough you could also use stakes and some string, stretching it out from the center while holding it tight. Then you can use your level to sight along the tightened string to confirm youve got the site completely flat.

    The Pool Will Just Look Wrong

    Ive seen my share of uneven pools, and its immediately noticeable. Like a glass balancing off center, when the water is not close to being level in your pool its a real sorry sight.

    You can immediately see one side is lower than the other, and you can bet everyone else who comes to your yard and sees your pool will think the same way.

    Recommended Reading: Can You Heat An Above Ground Pool

    How To Level Ground For A Pool

    This article was co-authored by Rob Litman. Rob Litman is a Landscaper, General Contractor, and the CEO of Vitoli Inc., a landscaping, hardscaping, ecoscaping, and swimming pool design company in Los Angeles, California. With over 20 years of experience in construction, Rob specializes in energy-efficient and drought-tolerant landscaping. He holds General Building Contractor and Registered Pool/Spa Contractor Licenses. In 2007, Rob won House of the Year in Gardena, California.There are 13 references cited in this article, which can be found at the bottom of the page. This article has been viewed 146,681 times.

    An uneven surface can weaken or damage an above ground pool, so leveling the ground before installation is essential. Remove the sod, then check for levelness to identify slopes and high spots. Always dig out high patches instead of filling in lower areas. After youve leveled the ground, rake away debris, tamp the soil, then spread and tamp a layer of sand.

    RELATED ARTICLES
    - Advertisment -

    Most Popular

    - Advertisment -