Saturday, August 13, 2022
HomeExclusiveHow To Replace An Inground Pool Liner

How To Replace An Inground Pool Liner

- Advertisment -

How Long Will It Take To Replace My Pool Liner

How To Replace An Inground Pool Liner

Once you’ve selected your Aqualux installation specialist, and chosen the colour you want, your liner replacement is likely to be completed within a couple of weeks, depending on how busy the installer is, and the scope of work required. The membrane itself will take between 5 and 7 days to manufacture, and a fairly standard time line would go something like this:

Day 1: Drain the pool and measure it up and order the Aqualux finish.

Day 2 – 4: Prepare the pool shell – repair any surface cracks, make any structural changes and replace fixing strips if needed. It’s also a good time to change any lights over to the newer LED styles.

As soon as the new pool interior arrives , so yours will be a bit quicker than it will be for one that has to be freighted to New Zealand or Paris .

Once the membrane is on site, the installation itself is generally completed within the day, sometimes stretching out to two days depending on how long it takes to re-fill the pool.

Test And Balance The Water

You need to get a baseline, which will tell you which chemicals to use and how much. For this, its best to use a high-quality testing kit rather than test strips in order to get more accurate results.

Once you know whats going on in the water, you can follow the same steps to open an inground pool, including using all the same chemicals.

Important: Do not skip the pool shock. Water that comes directly from your spigot, even though its been through a water treatment plant, can still contain microorganisms like algae spores and bacteria. Be sure to wait until dusk or nighttime to shock your pool.

Vinyl Pool Liner Replacement: Cost Steps Tips

Pool Maintenance | Vinyl Liner Pool Information

Do you own a vinyl liner pool and need to replace the liner? Maybe youre still pool shopping and looking into what it will take to replace your liner in the future.

Whether you have a pool now that needs maintenance or youre just educating yourself on the upkeep of your soon-to-be swimming pool, weve got you covered.

These days, River Pools exclusively manufactures and installs fiberglass swimming pools, but in our early days, we installed vinyl liner inground swimming pools as well. In this article, well share what we learned through our experience and tell you all about pool liner replacement, including how much it costs, how to do it, and some tips to keep your liner in good shape.

Recommended Reading: Pentair Heater/chiller Combo

How Much Is An Inground Pool Liner Track Replacement

If the pool liner track itself is unable to hold the liner, a professional can install a replacement for about $350, plus the cost of labor. If the pool liner is off track, a professional can come to your property and tuck it back in, which usually costs $100. The cost of labor differs from one company to the next.

Why Does My Pool Lose Water Over The Winter

Vinyl pool liners inground or above ground

At The Liner Specialists, customer satisfaction is our top priority. Contact us first, and youll see why its the only call you need for your swimming pool!Our areas of service in New York are Westchester, Putnam, Ulster, Dutchess, Rockland and Orange county. Connecticut areas are Fairfield, Lichtfield and New Haven County. We also service the Northern Half of NJ.

Recommended Reading: Spiders In My Pool

Additional Costs To Anticipate

Unfortunately, you cannot only look at the cost of the liner and think that it represents the total sum of money you need to spend. Instead, you do have a couple of other costs to consider.

Inground liners cost more to replace because they require some additional groundwork to be undertaken before the actual installation. That means the need to pay for more labor when replacing the liner.

The bigger the pool, the greater the amount of groundwork. Clearly, that increases the time required to complete the task at hand.

My Liner Does Not Have Coping Or A Bead Seam On The Liner

In ground pools and some above ground pools have a bead seamed to the top edge of the linerwhich is installed into a coping track along the top of the wall in the pool. Many above groundpools have a different style of liner which has no bead but instead overlaps the top of the wall ofyour pool. Once overlapped there is a plastic strip that snaps down over the top of the wall andholds the liner in place. When installing these types of liners be sure to look at the seam where thewall meets the floor to ensure that you have a level installation around the circumference of yourpool. If you do not leave enough liner on the walls the weight of the water can cause the wall tobuckle inwards into the pool.

You May Like: Swimming Pool Acid Wash Cost

How Much Does It Cost To Replace An Inground Pool Liner

Most homeowners spend between $979 and $3,278 or an average of $2,122 for repairing or replacing an inground or above ground vinyl swimming pool liner. The cost can get as low as $350 for a simple patch of a tear and as high as $4,100 for a complete replacement. The average cost to repair or install a pool liner lands around $1,900.

How To Replace The Swimming Pool Liner

How to Install an Inground swimming pool liner DIY Replacing a vinyl liner

The liner you purchase will come with installation instructions. Different types of pools have various necessities. For example, some pool liners need adhesives to hold it in place, while others are floating and use the weight of the water to keep the liner in place. If you are worried about proper installation, you can hire professionals to do the job.

You will need to drain your pool before you begin installing a new liner. Since pools have tens of thousands of gallons of water, you should check with your municipality, so you dispose of the pool water the proper way.

As your pool drains, you should gather the necessary tools including:

  • Screwdriver
  • Special items like wall foam and adhesives if recommended by the liner manufacturer

Also Check: Is A Variable Speed Pool Pump Worth It

Fiberglass Vs Vinyl Pool

When comparing inground pool costs, an inground fiberglass pool costs about $46,000. Compare this to a vinyl liner pool which costs $36,000 on average. The liner is around $4,500 to $6,000 and labor costs an additional $10,000. Labor, excavating, and additional parts can add another $11,000.

Fiberglass vs. Vinyl Pool

A Few Quick Pro Tips:

  • Be sure to read the directions completely before taking our your vinyl liner and fitting it into the track.
  • Dont use any sharp objects to insert the liner into the track.
  • Dont change your liner when its cold out. Warm or hot weather makes the liner softer and easier to work with.
  • Make sure everything is lined up properly before filling the pool with water. The water can pull an improperly fitted liner out which will make you have to drain the pool and start again .
  • Dont feel like you have to use your old faceplates. Get new ones if your old ones are weak or brittle.
  • Be careful with pool lights! If youre not experienced with electrical work, hire an electrician to do this part. If you DIY your electrical work, make sure your breakers are shut off before you start.
  • Dont replace the gaskets and faceplates until the water has reached at least a foot in height in the shallow end. Doing this step too soon can destroy your faceplates as the liner stretches.

Read Also: Hiding Pool Equipment With Plants

Ripped Or Torn Vinyl Liners

Small tears, 1-2 inches in length, can be easily patched with a vinyl liner patch kit.

Large tears, those of several inches to several feet, can also be patched using larger pieces of vinyl, but the long-term success of the patch may be doubtful. Many people would also rather not have a patchwork quilt for a pool liner and may prefer to replace when budget allows.

Patches tend to have the best success when they are small, and not in a corner or too close to the bead, or any of the cuts to the vinyl: steps, returns, skimmers, lights. Vinyl repairs on the wall are usually successful, if the vinyl is not overly stretched and stressed in that area. If its high on the wall, patch it dry low wall or floor patches are usually patched wet, or underwater.

If the vinyl liner is very old, rips and tears will occur, seemingly on their own. Vinyl liners of a certain age become hard and brittle, and can easily snap, or tear horizontally, near the waterline, as shown in the top image.

There is likely no real need to replace the liner for just a small tear, or even a large one, but if the overall condition of the liner is leading to tears and rips, there will soon be many more, and at some point, its time to plan for a pool liner replacement.

Dont Miss: Best Sealer For Stamped Concrete Pool Deck

Line Replacement Services Offered

From Captain

Above Ground Pool Liner Replacement

Once an above ground liner replacement is purchased from our store in Louisville, KY, we can arrange for installation.

The average price of an above ground liner replacement ranges from $250 $1,200 depending on pool size and depth.

In-Ground Pool Liner Replacement

Our staff at All America Pool are pool liner replacement specialists. We custom measure all liners to ensure a custom fit for your in-ground pool.

The average price of an in-ground pool liner replacement varies from $2,800 $7,000 depending on pool size and depth.

Also Check: Building An Inground Pool

Don’t Miss: Countryside Ymca Outdoor Pool

Replacement Swimming Pool Liner Installation

Replacing your old in-ground swimming pool liner is easier than you might think. Read the following tips and learn how to save several thousand dollars by replacing your old vinyl pool liner on your own.

General Pool Liner Storage InformationYour vinyl in-ground pool liner should be stored in areas with temperatures above 50 F to prevent excessive shrinkage and permanent folds in the vinyl material.

Cold Weather Replacement Swimming Pool Liner InstallationWhen installing an vinyl in-ground pool liner in temperature of 65 F or lower, store the liner at 70 F to 80 F for at least 72 hours prior to installation. When the pool bottom is finished, bring out the swimming pool liner and put it in as quickly as possible. Try to install the vinyl pool liner while in direct sunlight to help seat/fit it properly. Do not leave a boxed vinyl swimming pool liner exposed to the outdoor elements.

Tools Needed For Replacement Swimming Pool Liner Installation

  • Commercial vacuum or equivalent Shop Vac, Screwdrivers, Phillips & Flat Head
  • A Razor Knife
  • Two & Up To Four Friends To Help

How To Prevent Wrinkles In Vinyl Pool Liner

If you contract reputable builders to construct your pool, you should operate under the assumption that they want to provide you a good experience and a quality product. Youre both working toward the same goal. They dont benefit from an upset customer. Assume the best of them and know what you need to contribute to make this project a success.

If you read your warranty carefully, youll almost certainly find that wrinkles are not covered. In this case, if the builder does install your liner incorrectly and you find wrinkles, they will not be obligated to remove them, although they should.

When filling the pool, its okay to monitor the liner for wrinkles and point them out to the builder. They may not appreciate this, but better safe than sorry. If a builder ever instructs you to remove wrinkles in a pool they are installing, youve likely picked the wrong company. Consequently, you may want to ask if this is standard practice before signing an agreement.

When the builder presents paperwork for you to sign off on the liner installation, read the paperwork, discuss it, and know that youre satisfied with the job before you sign off on it.

To prevent high groundwater, install a dewatering system around the pool. You can do this both during and after construction.

Also Check: Inground Pool Cost New York

Learn More About Replacement Vinyl Liners

Latham is the #1 replacement liner manufacturer in the North American residential inground swimming pool market, a reputation thats built on more than 65 years of dedicated service and commitment to excellence. Our vinyl liners are available in a wide range of styles that all come with built-in UltraSeam technology, making seams invisible and increasing the strength of your liner. Request more information to learn more about replacement liners today!

If You Have A Vinyl Lined Inground Swimming Pool That Is Faded Or Leaking An Aqualux Pool Membrane Is For You

How To Replace An Inground Pool Liner

You have an inground pool with a vinyl liner as a surface finish – it’s faded, leaking or has a hole in it – so it’s time to replace the liner. Aqualux is the answer!

Aqualux is the ultimate pool finish – and an Aqualux finish made by ABGAL has many benefits over a standard inground pool liner:

Better Joins An Aqualux Pool Finish manufactured by ABGAL has smaller joins, and they are less visible than those on inground pool liners made by other manufaturers.

Easier to keep clean ABGAL’S unique, specialist joining process leaves no folds of material inside the pool – so unlike traditional welding methods, there is nowhere for dirt to get trapped. The Aqualux material itself is also treated to resist algae, so your pool will never require scrubbing – Aqualux is the lowest maintenance pool finish available.

Brighter Colours Aqualux uses the highest quality pigments, and special Ultraviolet inhibitors are added to the formulation to ensure colours resist sun damage for the long haul. Aqualux gives you Australia’s largest range of colours and designer patterns.

Guaranteed to last An Aqualux pool interior comes with a 12 year, pro rata warranty, but most last well beyond that. With proper care and in the right conditions, a 15+ year life expectancy is not unusual.

Also Check: Water Heaters For Above Ground Pools

An Expected Cost Of Owning A Vinyl Liner Pool

As far as construction costs are concerned, vinyl liner pools are certainly the more economic option when compared to high-end materials like gunite pools. said San Diego Pool Builder Bar Zakheim, However, replacing your pools vinyl liner still has a pretty hefty price tag associated with it. While this is an anticipated cost for vinyl liner pool owners, it still remains one of the main drawbacks of building a vinyl liner pool. Its definitely something I warn folks about ahead of time if they are considering buying a vinyl liner pool.

When considering replacing your swimming pools vinyl liner, the time to act is before summer begins. Once the summer starts it becomes extremely difficult to get your liner as manufacturers are often backlogged with existing orders to fulfill.

Ordering your liner in the off-season is the best advice to ensure that your pool is swim-ready with a new liner installed in time for the upcoming swim season. If youre trying to get your hands on the perfect vinyl liner, you may want to check the resource list of pool liner manufacturers below.

How And When To Replace Your Inground Pool Liner

Poor inground pool liners. Theyre so neglected. Like most of us, you probably spend the majority of your pool maintenance time balancing the water and adding chemicals, and making sure your equipment is running smoothly. And there your liner sits, holding thousands of gallons of water, being ignored every day. Its a thankless job.

Eventually, your liner will go on strike. Maybe not altogether or in a big way. Maybe itll just develop a teeny, tiny tear that you cant even see unless youre right up close. And because you cant see it, you might not notice it until its too late and patching isnt enough. Youll need to replace your pool liner.

Don’t Miss: Ideas To Cover Pool Equipment

What Are The Best Pool Liners

One important variable to consider is the thickness of the liner, which is expressed in units called mils that represent thousandths of an inch. Liners commonly range from 20 mil up to 27, 28 and even 30 mils thick. Liner thickness is referred to as a gauge in some areas, but its important to note that gauge and mils are not equivalent units. For example, a liner could be described as 30 gauge while the thickness could be measured at 27 mil . When speaking with a dealer about liner thickness, make sure to clarify whether you are talking about gauges or mils to ensure proper measurement.

Different pool liners have pros and cons that make them suitable for different types of pools. Thicker liners have higher up-front costs because they are heavier and can be more difficult to install. Thinner liners, like 20 mil liners, are lighter and can be more cost-effective and easier to install.

Dealer preference and regions of North America are the two main drivers for different mil thickness. Regardless of the mil thickness, choosing a Latham quality liner is the right choice and why Latham offers the same performance and warranty for all of our vinyl pool liners.

Leaky Liners Create Profound Problems

Best Pool Liner Color

Normal evaporation can lower a pools water level by ¼ to ½ an inch per week. A few external factors can increase that rate, such as: warm pool water warm, dry air windy conditions and heat generated by sunlight.

But if youve noticed your water level dropping by an inch or more per week, it may be an indication of a leak. If you know how to patch a pool liner, you may be able to find and fix a pool leak, and a patch may last for a while. Eventually, though, youll need to replace that liner to prevent damage to the underlying structure of your pool, your deck, and your yard.

Read Also: Concrete Paint Around Pool

RELATED ARTICLES
- Advertisment -

Most Popular

- Advertisment -