How To Select An In Ground Pool Liner
The first step in installing an in ground pool liner is to make sure to gather the right measurements. Excessive numbers can cause loose and wrinkled results. Short measurements can cause too much stretching. This can lead to poor durability over a period of time. In ground pools usually have different levels of depths. Consider this when taking measurements.
After that, the next step is to know the thickness of the liner that you will be using. The usual thickness used is 20 mil. Other options are 28 mil on the wall with 20 mil floor thickness and 27 mil thick pool liner. There is also the 30 mil thick liner.
20 mil liners are the cheapest among these choices. Durability is average and usually lasts up to almost a decade. You can use this up to 10 years, provided it goes through proper maintenance. If not, it can last for only around 3-5 years. 27 mil liners are also great options for in ground pools. They offer added durability and improved protection against UV rays. UV rays can damage the liner material and shorten its lifespan.
30 mil is the most durable and offers better protection against sharp objects. However, the thicker the pool liner is, the more difficult it is to install it. The thicker options also cost extra every time you upgrade to a thicker one. After deciding on the thickness, check the design, pattern and color choices. You may choose designs and patterns that match your homes décor.
How To Clean A Vinyl Pool Liner
Cleaning a vinyl pool liner can seem like an overwhelming task. A vinyl liner is especially tough to clean because its all in the details. However, there are steps you can take to make the process much easier and quicker.
Many factors go into cleaning your pool: water temperature, pH level, and the type of dirt or debris in your pool.
A stain eraser tool designed for cleaning pool liners can also make a big difference in the appearance of your liner and help it look new.
Mix the baking soda with some hot water to form a thick paste before applying with a sponge to remove all dirt, stains, and mildew on your pool liner.
Vacuum More Than Once A Week
It’s best to vacuum your pool once a week at a minimum, but often, you’ll want to vacuum more than that. Your filter won’t remove all the dirt and debris in your water, especially the particles that fall to the bottom of the pool and stubbornly sit there. Manually vacuuming an above-ground pool can be a challenge, so opt for a stress-free robotic cleaner that gets the job done.
Also Check: Mansard Pool Cage
What Is The Best Liner Pattern For My Pool
There is no one-size-fits-all answer to this question. The best liner pattern for you is the one that helps you bring your dream pool to life. Remember that pool liners dont just change the look of your pool, they can also alter the shade of the water. A pool liner can change the water color to deep and dramatic, rich, or light and tranquil. If you want to create a luminous sparkle on the waters surface, choose Iridescent inks from our Pearlscape Collection. If you prefer Earth tones over bright blues, you may like our Gulf Coast / Tan Seastone liner pattern.
Latham Pool Products offers an extensive array of designer patterns, with 30 different liner designs, youre only limited by your imagination and your personal taste. Choose the liner pattern that will fit with your backyard decor or a liner that will make your pool stand out as the ultimate outdoor sanctuary. You can even use our pool liner visualizer to get a preview of what different liner patterns will look like in your pool. See how different patterns work with your color scheme and how the pool liner can alter the hue of the water.
Guide To Cleaning A Pool Liner
If you need to clean your pool liner, there are many ways to do so. Pool owners have a few different options for how they can go about cleaning the liner. First, you should know that there is no right or wrong way to clean a pool and it just depends on what works best for you.
The first option is using an automatic cleaner or robotic vacuum cleaner. This type of vacuum cleaner would work well if you dont want to bend over and scrub the bottom of your pool manually with a brush or netting.
The second option is scrubbing your liners by hand which may be more effective than using an automatic cleaner depending on how dirty the bottom of your pool is as well as what type of pool liner you have.
Read Also: Aria Las Vegas Swimming Pool
How To Replace Your Above Ground Pool Liner In 8 Easy Steps
If you find yourself needing to replace your above ground swimming pool liner, either because of tears or excessive staining, you dont need to hire a professional.
As long as you have a little time on your hands, you can save yourself some serious money by doing it yourself.
Hiring a professional can cost well over $1,000 on top of the cost of the liner!
And since we are all about getting stuff done ourselves and saving money around here, Im gonna show you how its done!
Eight Option B: Store The Liner
Alternatively, if you were cleaning the pool to store it, fold up your dried and cleaned liner. Most above ground pool owners fold the liner in half then roll it. A quick tip to prevent the liner from sticking together is to put a bit of baby powder on the liner. Once the liner is appropriately rolled up, store it in a dry area with other accessories.
Don’t Miss: How Much Is An Inground Salt Water Pool
Use Pool Equipment Designed For Vinyl Liner Above Ground Swimming Pools
Vinyl pool liners can be very durable, but since they could rip and tear if not cared for properly, be sure to use cleaning equipment that is meant for vinyl liners. Brushes, vacuum heads, and automatic pool cleaners all come in models that have been specifically designed for use with vinyl liner pools. When purchasing such pool equipment, be specific about getting the equipment that is made for vinyl pool liners. Some of our competitors may try to sell you undersized pumps and filters with your above ground swimming pool package in order to give you a better deal, but such equipment will not effectively filter your pool water. If you have any questions about upgrading your pool pump and filter please call us at 1-800-918-POOL.
Vinyl Pool Liner Maintenance: How To Clean And Care For Your Liner
Proper maintenance is imperative to extend the longevity of your pool liner. The good news is, cleaning and maintaining your pool liner doesnt require a huge time commitment or investment. Make sure to gently brush your liner once a week to prevent the accumulation of dirt, debris, and chemicals. Make sure to maintain proper water chemistry in your pool to prevent liner wrinkling and calcium scaling. Use a vinyl-liner cleaning solution to keep the waterline free of dirt and oils. For more information on how to take proper care of your liner, follow this vinyl-liner maintenance checklist.
Also Check: Pristine Blue
Wipe Them Out: Stains On Your Pool Liner
There are several causes that can lead to stains on your pool liner. For instance, imbalanced pool water chemistry, or oils that build up. To prevent stains, that affect both your pools cleanliness and appearance, make sure that you clean your pool regularly, and when needed, use a gentle brush to scrub them out. You can even use natural cleaners to wipe them out. Be careful however not to use harsh chemicals that might set off your pools chemical balance.
Add And Smooth The Sand
If you used sand previously, check whether theres still enough to support the bottom of the pool. If not , lay enough sand to create a 3-inch bed across the entire inside of the pool.
Don’t Miss: Pool Vacuum Floating
How To Prevent Fading On Your Vinyl Pool Liner
Its no shock that chemicals and the sun are often the cause of fading and discoloration on your vinyl pool liner. While slight fading is common and occurs gradually over time, harsh sun and chemical exposure can cause your liner to fade prematurely. Thankfully, there are some things pool owners can do to prevent fading and protect their liner to keep it looking like new for as long as possible. Check out our tips to prevent your pool liner from fading below:
So What Do You Recommend
Based on our experience, looking after thousands of customer pools, we realize that there is simply one pool cleaner that we will recommend, with ease of heart, for a vinyl pool: The Hayward PoolVac XL. Simple.
Here is why:
- It was designed from the ground up for one pool surface: vinyl pools.
- It is lightweight, which reduces wear and tear on the liner.
- The components at the bottom of the cleaner are soft.
- It has exceptional floor coverage.
- It will not get stuck. This is very important for above ground pools because most other automatic cleaners do get stuck around the ladder.
Basically, there is nothing else like it in the market for a vinyl liner, especially for above ground pools.
Because of its popularity, Hayward added extra options that allow the cleaner to be used on other surfaces. However, it was simply designed for vinyl surfaces.
The Hayward Ultra XL is some kind of acquired taste. We find that once a customer gets one, they don’t change to any other cleaner ever. It is like there is no way back.
In addition to this, it is a cleaner that operates very quietly, has a great warranty, and because it has such a large customer base all its parts are widely and easily available.
Read Also: Lowes Pool Acid
Weekly Above Ground Pool Maintenance:
- Skim the surface, vacuum and fully brush the pool, in that order.
- Test total alkalinity, should be between 80-120 ppm.
- Clean the pool deck and surrounding areas, helps keep the pool clean.
- Add maintenance doses of algaecide, clarifier, metal control.
- Add chlorine tablets to refill the floater or chlorinator.
- Backwash or clean filter, only if pressure gauge rises 7-9 psi.
To clean your above ground pool, you’ll need pool cleaning tools, like a tele-pole, skim-net or leaf rake, pool brush, and a vacuum hose and vacuum head for vinyl pools. Brushing is important to remove films and dust particles from surfaces, where they can be filtered out of the water.
Pool pH is very alkaline dependent. Your total alkalinity level helps your pH remain stable. If too low, your pH level can fluctuate easily, and if too high, your pH level can be difficult to adjust.
Maintenance doses of algaecide and clarifier are very important for above ground pools, which can quickly turn swampy if chlorine or filtration suffers. Algaecide acts as a backup to such situations, and clarifiers help small filters immensely, to prevent cloudy water and algae blooms.
Add enough chlorine tablets to raise the chlorine level into the 2-4 ppm range, and strive for consistency. Most above ground pools use 2-4 of the 3″ chlorine tablets per week, in a chlorine floater or chlorinator.
Above Ground Swimming Pool Liner Bead Types
Unibead Above Ground Swimming Pool Liners: Unibead liners are the ultimate in versatility and have a two-in-one feature that allows you to replace an Overlap pool liner with a Unibead liner. Unibead above ground swimming pool liners have the option to be used with a bead receiver or as a J-Hook liner. If you dont have a bead receiver, simply hook the line onto the rim of the pool wall. If you have a bead receiver, carefully remove the J-Hook portion of the Unibead system and install like a beaded liner by snapping the liner into place. Both give you a clean, professional look without any excess material hanging over the edge like in an Overlap liner. The Unibead provides all the benefits of protective liner and the freedom to use patterns found only on beaded liners.
Beaded Above Ground Swimming Pool Liners: Beaded above ground swimming pool liners are the easiest to replace and come in a wide array of designs. Using a bead receiver that hangs over the top of an above ground pool kit wall, the Beaded pool liner simply snaps into the receiver giving you an even and consistent look. Because they install evenly around the pool kit wall, Beaded liners flaunt beautiful designs and patterns including wall borders and tile trims.
You May Like: Vdara Hotel Pool
Cover It Up Covering Your Pool
One of the best ways to protect your pool is by covering it up when not in use. The pool cover will protect your pool from any unexpected dirt or other types of debris. Furthermore, a pool cover can prevent your liner from the suns harmful impact, otherwise known as weathering.
Your guide to cleaning your pebble tec pool
Everything To Make Installation Easy
At Pool Supplies Canada, we want to make installing your own above ground pool liner easy – so in addition to our large pattern selection, we also have the largest selection of above ground pool accessories online in Canada. We sell everything to make your DIY liner installation as easy as possible!
Read Also: Semi Inground Pool Buffalo Ny
What Can I Use To Clean My Pool Liner
A pool liner can be cleaned with either a bleach and water solution or by using baking soda. Maintaining the correct water chemistry is also essential to preventing stains.
Properly cleaning a pool liner requires knowing the cause of the stain. If the stains are green or brown, then they are most likely caused by organic substances, such as algae or other plant matter. Reddish brown colors most likely mean the stain is caused by rust.
Correcting the pools water chemistry may remove organic stains without the need to remove the liner or do vigorous scrubbing. The pH level should be between 7.2 and 7.6, and the chlorine levels should be between 1.5 and 2.5. Calcium hardness levels should be at 200 to 300 parts per million, while alkalinity levels should be at 80 to 100 parts per million. When these levels are off-balance, the pool can be an ideal spot for algae or other organisms to grow. Cleaning the skimmer box and other problem areas with a rag covered in baking soda will not only remove some stains, but increase pH and alkaline levels in the pool.
The Two Main Types Vinyl Pool Liner Stains
Before you begin your liner cleaning, it helps to know what type of stain you are dealing with. Liner stains generally fall into one of two categories. Organic stains are usually a shade of brown or green and are caused by things like dirt, leaves, algae, bugs and other organic matter.
Metal can stain your pool in a variety of colours. Metal stains may be caused by pool ladders, pipes, heaters and even the pool water.
You May Like: Rust Pool Water
The Largest Selection In Canada
We carry liners from the industry’s leading manufacturers, such as Swimline Pool Products! With largest online selection of above ground liner patterns and over 10,000 liners in stock, were sure youll find a refreshing new pattern for your pool – all available for order at the best prices online in Canada!
Measure Twice Buy Once
All you need to determine which size liner your pool requires is a tape measure and something to write down your measurements. Because pool walls can warp and shift, take each measurement twice.
To get the height of any shape above ground pool, measure from the bottom rail to the top. Remove any obstacles from the ground to ensure an accurate measurement.
Check your result by measuring the height on a second section of wall. If the figure is between standard liner heights, round up.
You May Like: Mandalay Bay Pool Hours Summer
How To Maintain An Above Ground Pool:
- Run the pool filter everyday, for 12-18 hours daily.
- Water level should be around mid-skimmer not too high, not too low.
- Test pH level, should be between 7.4-7.6.
- Test chlorine level, should be between 2.0-4.0 ppm.
- Empty skimmer and pump baskets, as needed.
- Inspect filter pressure and pump operation.
- Observe pool cleaner operation, if you have one.
On a daily basis, your pool pump needs to operate, for at least 12 hours , to push the water through the filter, and prevent stagnation.
From the moment you open the pool, your pool needs to have a constant chlorine level. A complete test kit like the Taylor K2005, or 7-way test strips is recommended, to do full pool water analysis. Another option is to use the Taylor Troubleshooter test kit for pH, Chlorine and Alkalinity, and AquaChek test strips for your calcium and cyanuric tests.
Chlorine is very pH dependent, and as pH levels rise, the killing power of chlorine is reduced dramatically. Add pH increaser or pH decreaser, as needed, to maintain pH levels in the range of 7.2-7.6.
Using a permanent marker, write your clean, starting filter pressure on the filter tank, or directly on the pressure gauge lens, so you know the clean pressure reading. Then you will also know when to backwash, or clean the filter when pressure rises 7-9 psi above clean.