Tuesday, April 30, 2024
HomeGroundTaking Down An Above Ground Pool

Taking Down An Above Ground Pool

- Advertisment -

Complete Vs Partial Removal

How To Disassemble An Above Ground Pool DIY

Because only part of the swimming pool is being removed, a partial removal costs less money. However, the broken chunks of concrete and other rubble from the pool serve as the base that fills its bottom. The hole is then topped with dirt and a final layer of top soil. Usually, this works well enough, but if not performed correctly, the process can result in sinkage, swelling or a lack of proper seepage.

With a complete removal, everything comes outall the concrete, the rebar, everything. Once the pool is gone, the hole is filled with gravel and dirt, compacted, graded and finished with a layer of top soil. This method decreases the chance of anything going wrong in the future, especially if the backfill is performed by an engineering technician.

Either way, youll need to disclose the pools partial or complete removal when you sell the property. Keep all documentation regarding its removal, and take photographs to show the state of the pooleither partially or completely removedbefore it is covered up. The fact that you removed the pool should have little impact on your homes value.

Get A Free Estimate Now

Above ground swimming pool removal looks deceptively easy. You can do-it-yourself but we recommend that you hire a reputable contractor like Murray Demolition. We will handle the minute details that might seem simple on paper but can prove to be a hassle during execution.

The Murray Demolition team works extra hard to deliver customer satisfaction. We know that a pool can become disenchanting because you know longer use it or you dont have the time to maintain it. Maybe you want to add a feature that will make your property more valuable. We are capable of helping your home improvement goals a reality.

Also Check: What Is Stabilizer In Pool Water

Disconnect The Pool Filter System

After removing the wall, you have access to the bottom rail, base plates, and filter system. Disconnect the system and disassemble the base components. If needed, make a note of how things fit together for reference during reassembly. Your smartphone can come in handy for notes and photos to help jog your memory when you reassemble.

Shop Now:Sand Filter Tank Systems

Also Check: What Chemicals Do I Need For My Pool

Clean That Equipment Too

Look at all that space you have in your yard now! I dont blame you for feeling accomplishedyou absolutely should. But youre not done quite yet. Go ahead and disconnect your pump, remove all valves, give it a rub down, and let it air dry.

Your filter is next. Since most inflatable and Intex pools have cartridge filters, its going to be a breeze to finish this off. Open your filter pump, remove the cartridge, submerge it in cleaning fluid, and let them both air dry. If your filter cartridge is dirty, youre better off skipping the clean and ordering a replacement instead. Just make sure you get the right filter for your pool type. Got it all sorted out? Youre done!

Had more to clean up than you were expecting? You need to give your pool a leg up with an automatic cleaner. The Blue Torrent Stinger Automatic Pool Cleaner is my top recommendation. It works independently of your pool filter to lower energy costs, just needs to be plugged into an outlet, and has a lifetime warranty.

Tools And Materials Needed To Take Down An Above Ground Pool

Above ground pool decks!

1 Cordless screw gun and fittings

2 Large adjustable wrench

3 Spray lubricant/penetrant

4 Large flat head screwdriver and hammer/rubber mallet

5 Shovel

6 2 pieces of plywood to roll the wall on

7 Utility Knife

9 Wasp spray

10 Small bags or containers

11 Tape, small rope, or whatever needed to hold the parts together

12 Good space to store the pool

13 Water hose

Don’t Miss: Ideas For Above Ground Pool Landscaping

How To Drain An Above Ground Pool With A Drain Adapter

If you have an Intex, Coleman, or other temporary above ground pool, your pool may have a drain adapter. This allows you to drain the pool faster if you have to take it down at the end of the season.

  • Connect the drain plug to a garden hose before opening the value. Without a hose, the water will drain around and underneath the pool, softening the ground your pool sits on. You may need an adapter to connect your garden hose to your pool.
  • Place the other end of the garden hose away from the pool. Be sure its not draining into a neighbors yard.
  • Monitor the flow of water. Depending on how many gallons of water your pool holds, you may need to move your hose occasionally. Remember, your water shouldnt be flowing into a storm drain.
  • Why Store Your Above

    If it were up to me, all above-ground pools would have their plumbing, pump, filter, and any other accessories in a safe, dry place for the winter. Seems like Im overdoing it? Well, think for a moment about what this winter is going to bring. Even if you dont live somewhere that gets particularly icy, you will have to deal with storms and their debris, like dirty rainwater, twigs, leaves, and algae spores. You might even be somewhere where you get high winds. Storing your equipment away for those harsher months will save you a lot of cleaning time and the continuous checkups otherwise required during off-season pool maintenance. The time you take now to store it all away could save you loads of time laterand isnt that what managing any kind of responsibility is all about?

    You May Like: Airbnb Okc With Hot Tub

    Pool Demolition Cost Factors

    Demolition companies include any additional costs in their estimates, such as permits and debris removal. Removing custom features like enclosures, decking, and fencing adds to your total cost. Plus, the larger the pool, the more landscaping work is required.

    Pool Demolition Costs

    Landscaping $4 $12 per square foot

    Additionally, some cities require all pump and lighting wiring to be disconnected and removed from conduits, and any associated gas lines disconnected and capped at the meter.

    How To: Above Ground Pool Removal

    Taking down your above ground pool for the winter Part 2

    HomeTrash Pickup 0

    Valet Trash Professionals can meet all your needs for above ground pool removal in Northwest Arkansas. Above ground pools have become all the rage in recent years, but they arent meant to last forever. According to SwimmingPool.com, above ground pools will normally last between 5-15 yrs. It depends on the quality of the pool and the type of dirt the pool is sitting on.

    Summer is drawing to a close, swimming season is nearly over, and now you must decide what to do with your pool. If your pool is in great condition and you intend to use it again next year, now is the time to prepare it for the off-season. Off-season storage depends on if your above ground pool is steel sided, aluminum sided, or soft sided. You should always follow the manufacturers directions for winterizing and proper storage.

    If your above ground pool has fallen into disrepair or reached the end of its life, you may be asking yourself, How can I get rid of this pool?

    Disposing of an above ground pool is a messy job and it wont fit into your trash cart. So, what do you do with an old above ground pool? You have two options for getting rid of your old pool.

    Are you ready to get rid of your old pool and start the fall season with a clean backyard? For your free estimate and to schedule an appointment for above ground pool removal in Northwest Arkansas contact VTP at 236-4981

    Also Check: Where To Purchase Swimming Pools

    Draining The Water Anywhere Except The Sewer

    It is never a good idea to drain your pool into your yard or a nearby creek. All of the excess water will flood your yard, destroy all of your vegetation, and make the ground unstable. And all the chemicals in the water can be harmful if drained into a natural body of water. I always insist on draining the water into a nearby sewer it is the safest way.

    Above Ground Pool Removal Near Me

    Lots of people want to knowhow to remove a pool. You’d be surprised at how many potential customers come in asking us how to remove a pool and we have to tell them that they can’t do it themselves. That’s not true for all cases, but if you want a perfectly square edge and a flat surface, it’s better left to professionals unless you’re willing to invest in some expensive tools and equipment.

    Here are some tips on removing your own above-ground swimming pool:

    • Make sure that you have permission from whoever owns the property where your pool is located before attempting any sort of removal project otherwise, there could be legal consequences involved later on down the road if someone finds out about any trespassers taking something without first obtaining proper authorization .

    Recommended Reading: How To Fill An Above Ground Pool

    How To Clean Your Inflatable Pool

    If you like to clean the inflatable pool, you will need mild cleaning agents, a soft brush, and a bucket of water. You do not need any pool cleaner here.

    Add the detergent to the water. Dip your brush in and start brushing the pool back and forth. This development can eliminate and prevent build-ups. Now, rinse the pool using your hose. But ensure that your drain caps are open during the cleaning process.

    Get a pump to extract the water left in the pool. Connect your reversible hose to the pump. The essence of this is to draw out the water remaining in the holes. This process requires pushing air into the holes to blow out water that may be trapped in them.

    To store the inflatable pool, get a plastic container, fold the pool, and then keep it in the plastic box. Ensure that you leave the caps open when storing the pool. So, thats it. You have successfully stored your inflatable pool until next summer.

    Closing An Above Ground Pool For The Winter

    Take a look at this significant picture and also have a look at the ...

    At the end of the swimming season, you must follow these directions to winterize and make your pool ready for the Winter. The following guide will work for above ground pools sanitized using chlorine or salt water.

    Step 1) Prior to Closing

    Several days prior to closing your pool, test the water for the pH level, total alkalinity, and chlorine / salt water levels. The water balance is important to protect the pool from corrosion or scale build-up during Winter shut down.

    Step 2) Perform a Complete Inspection

  • a) Finding Leaks

    Caution: Make sure the pool is not leaking before covering. Serious structural damage can occur if leaks go undetected through Winter shut down from ice movement. Maintain a strict leak inspection during the fall, Winter and Spring months.

    To determine if the pool is leaking, mark the liner at the water level with a non-permanent marking device such as tape or a wax pencil and observe the water level in the pool for 10 to 14 days after the pool has been closed for the season.

  • b) Check the Liner

    Make sure the top of the liner is still attached to the pool wall. Make sure there are no leaks. Repair any liner holes with a vinyl patch: any small punctures in the liner can be easily repaired with underwater repair kits available at Pool Supplies Canada. Do not remove the liner from the pool, as removal of the liner will void the existing warranty.

  • Step 3) Add Closing Chemicals

    Step 4) Lower the Water Level

    Step 5) Filter Preparation

    Read Also: What Type Of Above Ground Pool Is Best

    How To Winterize A Metal Frame Above Ground Pool

    Although you may not have to take your metal frame down for the winter, you do need to winterize it to give it the boost it needs to endure those cold winter months. If you want to skip the hard stuff and give yourself a bit of a leg up, go ahead and opt for the use of a winter closing kit. To show you the lay of the land though, lets briefly go through the different steps it takes to get your metal frame pool ready for winter.

  • Adjust the alkaline and pH levels. You want to first adjust the alkaline in the pool, with the ideal range being 100 to 150 ppm. You then want to adjust the pH level and get it in the range of 7.4 to 7.6. For each of these variables, the higher the level, the better it is for when you are winterizing.
  • Adjust the calcium hardness level. After this, get your calcium hardness levels between a range of 175 to 225 ppm.
  • Shock your pool and add winter algaecide. When these levels have been solidified, it is now time to shock your pool. Along with that, you will need to add some winter algaecide to prevent the growth of harmful algae even in the cold winter months.
  • Disconnect and store the pool lines. After you have your water good to go, move on to your pool lines. Disconnect them, allow them to dry completely, then store them in a dark, dry area.
  • Lower the water . Once this is down, lower your water level a bit, cover the pool, and voila! Your pool is now winterized!
  • We Do The Work While You Sit Back And Relax

    • We also pick up heavy items! We do it all Furniture Removal, piano removal, washer & dryer removal, appliance removal, hot tub removal and much more! Removing and disposing heavy, bulky items can be an extremely difficult task best left to the professionals. So, you dont have to go through the ordeal. Just sit back and let us do all the heavy lifting for you.
    • Need anything to be demolished? NOT a problem!! We also provide demolition services to assist your needs. Our Junk Rats will professionally and efficiently service your demolition needs, we offer kitchen demolition, shed demolition, garage demolition, deck demolition, above ground pool removal and more! Just give us a call & well gladly assist you.
    • In need of an estate clean out or any other cleanout service? Our friendly team members will perform the work with respect when youre going through a very difficult and emotional time. We donate up to 70% of the items we remove, so it is less trash into the landfill and someone else in need will be happy to receive our donation. Youre only required to pay for the space your items take up on the truck no hourly rates, additional labor costs, or disposal fee-its all included in your flat-rate price!

    Massachusetts Junk Removal

    1. Drain the pool

    The easiest way to do this is by poking a few holes in the bottom of the pool liner and allowing the water to slowly drain into the earth. You can use your pool pole to do this or anything else that will make small holes in the liner.

    You May Like: Are There Any Pools Open

    Benefits To Removing An Above Ground Pool

    Removing your above ground pool will save you time and money on swimming pool maintenance.

    Not to mention, if you plan to sell your home in the future, removing an above ground pool will increase your home’s overall value.

    Above ground pools are typically considered undesirable by the average homeowner, so they will usually calculate the cost of the pool’s removal into their offer on your home.

    Removing the pool will also likely increase the number of potential buyers, making your home easier to sell, too.

    Another benefit is the elimination of the hazards and liabilities that come with pool ownership and the additional yard space you’ll have for other activities or landscaping opportunities that can further increase your home’s value.

    If you have young children, removing your pool eliminates the potential safety hazards associated with pool ownership.

    If you and your family love your above ground pool and you get a lot of use out of it, then you should hold off on removal until the pool needs to be replaced or you are getting ready to sell your home.

    Keep reading:

    How Much Does It Cost To Remove An Above

    How to Take Down Above Ground Pool! Timelapse
    • Cost of pool removal

    In Ottawa, the average cost for removal is $1,600 – $2,000. The price varies depending on your location and whether or not you have a deck. If you do have one, expect to pay around $3-$4 per square foot as well as extra fees for demolition of a concrete deck or brickwork underneath the pool. Since there are no concrete walls or pool materials you would have to deal with to remove an inground pool or a very large pool, the cost forsafe demolition won’t be as high.

    • Cost to remove pool decking

    If you don’t have a deck, removal will be less expensive than if you do. The average cost ranges from $200-$500 depending on how big your yard is and what materials are used . You may also need drainage pipes removed or filled in order to comply with local bylaws.

    Don’t Miss: How Do I Get Algae Out Of My Pool

    Hauling And Disposing Of An Above Ground Swimming Pool

    Before you begin draining the pool, know where you’re able to haul it away. Since most above ground swimming pools are a combination of composite materials, plastics, and metals, said materials will be disposed in three. The plastics will likely be recycled materials, while the composites will be a combination of recycled and junk garbage, leaving the metal, which can be sold as scrap.

    During the hotter parts of summer, homes with a pool are often the envy of the neighborhood. Round above ground swimming pools are versatile because they can be taken down and moved or stored when not in use, but knowing where to start disassembling the pool and in which order the pieces should come off can be a challenge. — San Francisco Chronicle

    There a typically two or more types of metal in an above ground pool, and that means you can strip those of anything else and sell the metal for some extra cash. If you’re unsure about what to take where, hire a professional junk removal and hauling service to dismantle it and dispose of it.

    RELATED ARTICLES
    - Advertisment -

    Most Popular

    What Is The Best Pool Vacuum

    - Advertisment -