Sunday, April 21, 2024
HomeMust ReadWhat Type Of Shock Is Best For Saltwater Pool

What Type Of Shock Is Best For Saltwater Pool

- Advertisment -

Types Of Chlorinated Shock

Shock A Salt Water Swimming Pool When You Have A Chlorine Generator

There are three main types of chlorinated shock. Each one will do the trick, but they do have some significant differences. The main types are liquid chlorine , cal-hypo , and lithium . These all contain chlorine as the main ingredient, but the other ingredients affect how they work. Depending on your situation, one type of chlorinated shock may be better suited to your pool than another.

So to understand when to use each type of shock, lets look in more detail at the three types of chlorinated shock.

Can I Add Shock To A Saltwater Pool

shocksalt water poolpool’swillwillpoolpool shock

. Similarly, it is asked, can you add shock to a salt water pool?

How to Shock a Saltwater Pool. Just like any other chlorine pool, shocking a saltwater pool is no different. If using granular pool shock , use 3 lbs per 10000 gallons, for a complete shock that will kill anything in the pool. If using 6% liquid chlorine bleach, add 5 gallons per 10000 gallons.

Similarly, what happens if you put chlorine in a saltwater pool? yes you can. It does not matter to the pool water how the chlorine is introduced – just that it is introduced. So in this sense you can add liquid chlorine, granular chlorine or even chlorine pucks to your pool if you have a salt system and this is no problem at all.

Likewise, people ask, do I need to add chlorine to my saltwater pool?

Saltwater has a reputation for being easy on the skin. Instead of adding chlorine to sanitize a saltwater pool, you add salt, and then a chlorine generator converts it to chlorine. When the free chlorine level is low, that usually means it’s time to add more salt, but it may mean a couple of other things as well.

Why is my saltwater pool turning green?

There are several possible causes for a green pool:Organic Matter – this might be a lot of dirt washing into the pool, or buds falling off of the trees, or algae that grew because the chlorinator failed to keep up. Cell Failure – your salt cell has a lifespan of approximately 10,000 hours.

How To Choose The Right Shock For Your Pool

You can choose the right pool shock for your swimming facility as follows:

  • Vinyl Pools
  • Use the above shocks for treating the vinyl pools or use Di-Zap dichlor based products like Pool Essentials Shock Treatment.

  • Concrete Pools
  • You can use the above shocks and others like Cal-Chlor sanitizers.

    Note: Use Non-Chlor or Di-Chlor if your pool has a high level of calcium. Avoid Di-Chlor if the pool has high cyanuric acid levels instead, go for non-Chlor and Cal Hypo shocks.

    Recommended Reading: How To Take Calcium Off Pool Tile

    Aqua Chem Shock Xtra Blue

    If youre looking for a tried-and-true, all-purpose pool shock, we recommend Aqua Chem Shock Xtra Blue. This product is suitable for use in all types of pools, including salt water pools, above-ground pools and inground pools. The active ingredient is sodium dichloro-s-triazinetrione , which contains chlorine. It effectively kills algae, bacteria, and chloramines while making pool water crystal-clear and sparkling clean.

    Best of all, Shock Xtra Blue works extremely fast your pool will be swim-ready in as little as 15 minutes after treating it. Additionally, its formulated to reduce eye irritation and minimize the chlorine smell. This shock is also budget-friendly compared to similar products on the market.

    Test Before You Shock

    Compare price to salt water pool shock

    Before shocking your swimming pool, we highly recommend testing the water and finding the best pool vacuum to clean out any debris. A pool test strip will give you a read on your free chlorine, pH level, total alkalinity, cyanuric acid, borate, calcium hardness, and calcite saturation index. If you have a salt water pool, it can also tell you if your water is within the salinity goal range.

    If you test your water and see that your free chlorine level is below 3 ppm, shocking the pool is a good idea. We also suggest shocking your pool in the evening, because natural sunlight can break down as much as 5 ppm of chlorine each day. In addition to testing your water before treating it, we also recommend retesting afterward to make sure your chemical ranges are where they should be.

    You May Like: How To Take Calcium Off Pool Tile

    Dark Green Pool Water

    If you have dark green pool water, you should look to follow the above steps, but with a slightly higher dose of acid and chlorine. Adding, for example, 2 to 3 litres of acid over a space of 48 hours and adding 2 to 3 cups of granulated chlorine. Also, darker green water may also be a cause of stagnant debris sitting on the bottom of the pool which needs to be cleaned out before you dose it. Be sure that this has all been scooped up using a leaf shovel, followed by being manually vacuumed out of the pool using a vacuum head, an appropriate length hose for your pool and a telepole.

    Is It Worth Converting To Saltwater Pool

    Here are some of the pros and cons of converting to a saline pool system. Maintaining your saline pool is easier than maintaining a chlorinated pool. Because your salt system converts the salt to the needed chlorine, you are not having to constantly add more chlorine to your pool. This makes maintenance much easier.

    You May Like: Mandalay Bay Pool Gazebo

    Pool Shock: Best Shock For Your Pool Type

    You may be wondering why we have developed so many types of granulated oxidizers, known more commonly as pool shock.

    The answer is quite simple there are various pool types and different uses for pool oxidizers, and our different formulations meet these needs accordingly.

    Whats the best shock for your pool? Lets explore the possibilities

    Why Is There No Chlorine In My Saltwater Pool

    Can I Shock My Salt Water Swimming Pool With A Chlorine Generator/Salt Cell?

    Chlorinesaltchlorinethesaltthea salta poolthethenotchlorine

    Alfie Husges

    If Someone Poops in the Pool

  • Close your pool or hot tub to all swimmers.
  • Put on disposable gloves.
  • Using a net or a bucket, remove the poop from the water.
  • Do NOT vacuum the poop from the pool as you’ll just break it and spread it around.
  • Clean up the poop from the net or bucket you used to get it out of the water.
  • Roseline Ravipati

    Recommended Reading: Mandalay Bay Cabana Reservations

    Clorox Pool& spa 81005clx Saltwater Stabilizer

    Choosing a pool shock for your pool involves selecting an effective product. For saltwater pools, the Clorox 81005CLX is an excellent shock that will leave your pool looking impeccable and very clean.

    Salt water pools are great because of how gentle they are on your skin and eyes. However, they generate unstabilized chlorine, which easily dissipates and loses power under sunlight. That is why you need a stabilizer like the Clorox 81005CLX. By applying this product to your pool, you can maintain a correct level of chlorine regardless of the season.

    Apart from these benefits, this stabilizer also eliminates organic contaminants from the pool to make your swimming safer and more enjoyable. It is also easy to apply and economical.

    Benefits Of Pool Shock

    It goes without saying that the biggest benefit of pool shock is its ability to clear your pool of all the bacteria and algae in one, clean move. If the regular treatment was seen as the oral pill, then the shock is practically the intravenous injection. You will not have to worry about catching anything while you are swimming.

    Since it kills off the algae and bacteria in your pool, it wont only be healthier to swim in but also more pleasant. When your pool starts to look a little less clear than it used to, you dont really feel that comfortable stepping into the water. Its yucky, and not at all hygienic. However, by giving it a shock, the pool will be able to get that nice, clean color.

    Last but not least, while it is not recommended to make this your pool-cleaning go-to, its a quick fix to an emergency. Lets say that you went on a holiday for quite a long time and now your pool looks all yucky and full of muck. Its not very convenient to empty the entire pool which is why pool shock is such a convenient quick fix.

    However, if you got enough time to take care of your pool water daily, we recommend also looking at our reviews on chlorine tablets for pools. They will not shock the water but it will instead generate a steady low level of chlorine. Check our guide now!

    Also Check: How To Increase Stabilizer In Pool

    Easy Steps For Shocking Pool And Spa Using Chlorine

  • Measure The Correct Dose for Liquid, Granular, and Stabilized Chlorine
  • Chlorine Dosage: The General Measurement:

    1lb/1pound = oz. × 0.062500

    • Sodium Hypochlorite: 10 fluid ounces of liquid chlorine with 12.5% Chlorine raises FC level by 1ppm in a 10,000 gallons pool or spa.13 fluid ounces of liquid chlorine with 10% chlorine raises FC level by 1ppm in a 10,000 gallons pool pool or spa.
    • Calcium Hypochlorite: 2 oz. of calcium hypo with 67% chlorine raises FC level by 1ppm in a 10,000 gallons pool or spa.
    • Trichlor /Tablet Chlorine: 1.5 oz. of trichlor raises FC level by 1ppm in a 10,000 gallons pool or spa.
    • Dichlor: 6.5 oz of Granular chlorine with 56% available chlorine raises FC level by 3.0 ppm in 10,000 gallons pool or spa.

    2. Getting Ready to Shock Your Swimming Pool and Spa

    1). Shut your SWCG if you have one. Find out the volume of your pool in gallons and make sure water is at its normal level then take FC reading. Knowing your current FCL will give you an idea of how much chlorine shock your pool or spa needs. Recommended range is 3ppm for non-saltwater and 3 – 4ppm for saltwater pool and spa.

    2). Test and know your Cyanuric acid level in the water, the correct range for non-saltwater is between 30 – 60ppm with the ideal level at 40ppm, 70 – 80ppm for saltwater, and 20-30ppm for indoor pool and spa. The cyanuric acid level in your water should always be the main factor to decide what amount of chlorine shock your pool needs.

    Calculate The Proper Amount Of Shock

    HTH Swimming Pool Super Shock Treatment Pack of 6 4 in 1 ...

    You might be wondering how much shock is enough.

    Well, in order to reach breakpoint chlorination, you’ll need to achieve about 30 ppm.

    If the chlorination does not reach this level, it wont kill all of the algae in your pool or remove unhealthy chloramines.

    In order to calculate the proper usage, you will need to know approximately how many gallons of water are in your pool and read the label of your product.

    For the cal-hypo product we recommend, that is about three pounds per 10,000 gallons of water.

    Read Also: How To Clean Concrete Pool Deck

    Is A Salt Water Pool Right For You

    Salt water systems are appealing for a whole range of different reasons. Maybe the salt reminds you of the sea. Maybe your body just doesnt like chlorine and youd like to spend more time in the pool without hurting your skin or damaging your hair. Many pool owners just like the comparative ease of maintenance versus standard chlorine treatments.

    Keep in mind, salt water systems might be lower-maintenance, but theyre not no-maintenance — an improperly used salt chlorinator can damage your pool, particularly if youve got a concrete pool. Running your system too much, or adding way too much salt to your water, can have ill effects on your pools surfaces.

    Do you own one of these systems? Would you recommend another one for this best-of list? Let us know in the comments!

    At River Pools, we manufacture world-class fiberglass pools for customers across North America. If you’re shopping around for a fiberglass pool, feel free to take a look at our catalog of models, visit our extensive video library, try out our pool cost calculator, or request custom pricing using the button below.

    Which Is The Best Chlorine Shock Sodium Hypochlorite Vs Calcium Hypochlorite

    There are two common types of chlorine shockssodium hypochlorite and calcium hypochlorite and each is used for a different purpose. Apart from these two, there are also other types of special pool shocks including:

    • potassium peroxymonosulphate
    • lithium hypochlorite
    • dichloroisocyanuric acid

    However, all these special shocks, including calcium hypochlorite, are not recommended for regular pool sanitization. This is because their continued use introduces other compounds in your pool water, including calcium, pH, and cyanuric acid, leading to increased levels of these chemicals in your water.

    This article is mainly about two common shocks: sodium hypochlorite for daily chlorination and calcium hypochlorite for fighting algae during algae breakout.

    The type of pool shock to use in your pool will depend on what you need to achieve, which may include clearing cloudy water, killing germs/bacteria, or fighting pool algae.

    Also Check: Can Vdara Use Aria Pool

    Best For Spas : Controlomatic Smarterspa

    • Price : $429
    • Plumbing / pumps required: No
    • Salt cell lifespan: 7,000 hours
    • Replacement salt cell cost: $219

    Sometimes, you just dont need to treat that much water. ControlOMatic makes several salt chlorinator systems for spas, with a maximum treatment capacity of 1,000 gallons. The SmarterSpa salt chlorine generator is ControlOMatics more automated option — it includes an integrated detector that can activate an automatic chlorinating cycle if the level of chlorine in your spa drops too low.

    You could also use SmarterSpa in a small above-ground pool, but itd have to be pretty small. Our two spa add-ons, the RS08 and SS08, have 800- and 890-gallon capacities, respectively, to give you an idea of how much watery space the SmarterSpa can handle.

    In The Swim Pool Winterizing Closing Chemical Kit 35k Gallons

    4 Best Pool shocks for salt water pools to kill algae in 2021

    In The Swim Pool Closing Chemical is for use with a pool of up to 35,000 gallons. The product doesnt bleach or stain your pool liners and uses chlorine-free chemicals.

    Just like the 15000 gallons Closing Kit from In The Swim, this shock has a slow-release floater that keeps your swimming pool oxidized during the winter. It also includes chlorine-free shock, I winter pool floater, 1 winter sorb, and 1 qt. winter strain-away.

    You May Like: Winstar Pool Tower North

    In The Swim Pool Winterizing Closing Chemical Kit 15k Gallons

    This pool shock is for use with swimming pools of up to 15,000 gallons. The kit comes with chlorine-free chemicals that wont bleach your pools liners or even stain it.

    Slow-release setting floaters ensure that your pool is oxidized throughout the winter. And the packet includes 1 winter pool floater, 2 lbs. chlorine-free shock, among other things. The kit is highly effective.

    Considerations For The Best Salt Water Pool Shock

    When youre searching for the right pool shock product to pair with your pool, there are several factors that you should consider, the primary of which is whether or not the product will effectively clean a saltwater pool. Since not all shock products are ideal for saltwater pools, it may take some time to find the right solution. If you want a product that will kill all bacteria, algae, and other organic contaminants, you should determine if you want the product to use chlorine or not.

    While chlorine-based products are typically most effective, many pool owners prefer pool shocks that contain very little or no chlorine. If you find that you dont like the chlorine smell, there are some pool shock products that are able to get rid of this smell, which should help you feel more comfortable when swimming in your pool. All of the pool shock products in this guide have proven to be popular and effective, which means that the one you choose largely comes down to which feature-set you prefer.

    Its important to choose the best pool shock if you want yourself and anyone else who swims in the pool to remain healthy while having a great swimming experience. If too many contaminants are left in your pool water, the water itself can become cloudy and unhealthy, which can be a hassle to deal with. Using the right pool shock treatment can eliminate all contaminants while also preventing future algae growth.

    Don’t Miss: Can Vdara Use Aria Pool

    Hth Pool Shock Shock Treatment

    HTH Pool Shock comes in a 6 count 1 pound bag that is effective for shocking your swimming pool. It is a multi-purpose shock that clarifies, sanitizes, shock treats your swimming pool and helps to prevent algae development.

    Furthermore, it is an easy to use and convenient product that keeps your pool fresh. Another thing is that it doesnt over-stabilize your spa or pool chemicals.

    How To Shock A Saltwater Pool

    Pool Shock: Best Shock for your Pool Type

    Just like any other chlorine pool, shocking a saltwater pool is no different.

  • Balance the Chemistry: Before you add shock to the pool, its important to test and adjust , your pH, Alkalinity and Calcium Hardness levels. If pH is high, chlorine is very slow to react, and less potent. If Calcium levels are also high, crystalline deposits could form. If Metals like copper and iron are high, shocking the pool can cause a temporary staining. Be sure to test your level of cyanuric acid , and if over 20ppm, add 50% more shock. If over 40 ppm, double the dose.
  • Calculate the Dosage: Adding the correct amount of shock is important if you are trying to kill full-scale algae blooms or remove chloramines from the pool. If you do not add enough, to reach breakpoint chlorination, approximately 30 ppm the result will not be complete. If using granular pool shock , use 3 lbs per 10000 gallons, for a complete shock that will kill anything in the pool. If using 6% liquid chlorine bleach, add 5 gallons per 10000 gallons.
  • You can turn down the Salt Cell production at this point to a low level, as the shock will probably last a few days. Test the chlorine level the following morning, and it should still be sky-high. If not, that means that something has consumed all of the chlorine, and another shocking of the pool is in order.

    Also Check: Pool Heater Chiller Combo Electric

    RELATED ARTICLES
    - Advertisment -

    Most Popular

    - Advertisment -