Wednesday, April 10, 2024
HomeGroundHow To Set Up An Above Ground Swimming Pool

How To Set Up An Above Ground Swimming Pool

- Advertisment -

Inground Vs Above Ground Pool

Bestway Fast Set Above Ground Swimming Pool Set Up Video

Inground or built-in pools are more expensive to install but do last longer than above-ground pools. Bear in mind, inground pools might negatively affect the resale of your home, and not everyone is okay with the required maintenance and expense of owning a pool. Above-ground pools are easier to remove.

  • Sizes Above-ground pools can be as large as an inground pool. Most above-ground pools have a uniform depth rather than having a deep end and shallow end in the pool.
  • Maintenance Inground and above-ground pools require about the same maintenance. It is more difficult to clean an above-ground pool if it does not have a deck.
  • Longevity The average above-ground pool will last 7 to 15 years and above-ground pool liners last about six years. The durability of an inground pool depends upon the type of pool. Inground pools last at least 10 years, and some will last over 20 years.

About The Pool Factory

Americas Above Ground Pool Experts is the best place to find everything you need to make owning a swimming pool or spa fun and easy, at the best prices today. With a combined 50+ years of experience The Pool Factory employs a highly trained staff of above ground and semi inground pool specialists. The Pool Factory can provide unique solutions for all pool supplies and swimming pool needs.

Above Ground Pool Vs Inground Pool Cost

The average cost to install an inground pool is $35,000 with most homeowners spending between $28,000 and $55,000. The additional cost of pool ownership for essential maintenance, increased utilities, and repairs adds $2,500 to $5,000 every year.

Above Ground Pool Vs. Inground Pool Cost

Pool Type

As you consider installing an above-ground pool, also factor in these considerations:

Recommended Reading: Can I Paint The Concrete Around My Pool

Start Your Pump And Filter

Fire it up! Make sure the system starts, and check for any leaks or drips. Dont forget to make sure the ground wires are properly connected to the pump.

If you find your system is running dry, you may need to prime the pool pump. You can do this by shutting off your filter system, removing the pump lid, and adding water from your garden hose or a bucket of pool water.

This will give the pump the boost it needs to start pulling water. Put the pump lid back on, tighten it up, and restart the system.

Whether your filter uses sand or the tiny fossilized organisms known as diatomaceous earth , backwash it after you start your filter system up. The differences in technique between how to backwash a sand filter and how to backwash a DE filter are small but important. The biggest difference is adding DE after you backwash filters that use it.

Always follow your manufacturers instructions when backwashing any filter.

Why You Need To Know How To Open An Above Ground Pool

How to Set Up an Above Ground Swimming Pool

Your pools been covered all winter. As convenient as it would be to just pull the cover off and dive right in, think for a minutethat waters been sitting there, stagnant, all winter long. Do you really want to submerge yourself in that? Didnt think so.

Knowing the above ground pool opening process will ensure that when you do finally get back into the pool, its in clean, clear, non-swampy water.

Don’t Miss: Is The Venetian Pool Open

Ways Of Leveling Your Pools Base

Its not something you think about on a regular basis , but each cubic yard of dirt weighs about 2,300 pounds. That same cubic yard, spread out over the area occupied by a 15-foot round pool, is less than half an inch deep yikes! Thats a lot of shoveling.

If your backyard is far from level, your best bet may be to hire some equipment, like a Bobcat with a dozer blade, or even pay professionals to do the necessary earthmoving. This adds to your total cost, so may make it worth looking at either a larger or a more durable pool than what you first had in mind.

Should you choose to do the job yourself, you first have to decide between The Hard Way and The Easy Way.

The Hard Way starts by using a sod cutter or rototiller to hack out a chunk of your lawn. After that, youll use a shovel and rake to smooth and level what remains, removing all rocks and roots as you go, finally tamping down the soil with a lawn roller.

The Easy Way produces nearly as good a result, with much less sweat and no risk of damaging a buried cable or sewer line. It does require a patch of ground thats at least eyeball level, though, so you may still have to do some digging.

Sand takes much less effort to rake flat. Its recommended that you tape a spirit level to a straight board. As you drag it around the site of your future pool, any hollows and dips will be easy to spot and deal with.

Once your ground is level, you can lay down bottom plates, a base protector, and a tarp, and youre good to go.

Clean Up Debris And Check For Wear And Tear

Before you open your pool, take some time to survey the area around your pool. Trim overgrown trees and hedges. Sweep away nearby leaves. Check your for damage, wear, and tear and address any issues before you open your pool for the season. Be sure to clean and repair any deck furniture so that it is safe for use. You should also check pool equipment like safety rails, slides, rescue equipment, ladders, and diving boards.

You May Like: Is The Mandalay Bay Pool Open

They Have Strong Frames

Most Intex pools are made out ofvery sturdy steel walls. They dont easily wear out and they can keep your poolsteady. Its always best to have an ultra-frame type of pool if you want tokeep it in place.

If you observe, Intex poolsactually focus more on long shelf life and durability. The cool thing about apool of strength is that even if the leveled ground were to sink a bit, itwont affect the pool.

For the homeowners that are afterthose aspects, Intex pools are definitely a good choice. Youll especially wantto have all these strong aspects if you desire a good pool for your yard.

Diy Above Ground Pool Makeover


Here’s a nice above-ground pool that you can probably refurbish. This means you have a nice ready-made pool that you can style back to beauty.

A new model of the kind of pool in this guide probably goes for about $2,392 and you still have to install it by yourself or get someone to do it for you. With this guide, you can do this with ease. The most important step is to clean the inside of the pool thoroughly before painting it with any color of your choice.

Recommended Reading: How Do You Get Iron Out Of Pool Water

Above Ground Pool Electrical Install Cost

Hiring an electrician is advisable, and you can expect to pay between $40 and $100 per hour for the electrician cost for an above-ground pool. Prices will likely total around $350 to $500 depending on the size of the pool and the load of the pool equipment. Power is needed for the pool pump and filter. It is vital to ensure all electrical aspects of your pool are appropriately installed, especially when they are so close to water.

Inventory Your Pool Chemicals

Youll want to have all of your chemicals ready to go before you start opening your pool. Check the expiration dates on all of your pool chemicals, and replace any that are past their prime. . You should also replace any chemicals that werent properly sealed before they were stored.

Chemicals Checklist: Everything You Need to Open Your Pool

Need to do a pre-opening pool chemical supply run? Heres what youll need to get the job done right:

  • A good test kit or test strips for checking your pools pH, calcium hardness, total alkalinity,and chlorine levels
  • Chlorine granules or tablets
  • Stain treatment

Recommended Reading: When Does Lifetime Fitness Pool Close

Installing An Above Ground Pool

Installing this for your house is going to be as quick and simple as possible. First, you need to get all the wood ready for this project. Set the wood you will use for the base of the pool on the space you want to start mounting.

The floor for this pool was cemented, so if you want something permanent you might do the same thing. After building the walls, install the vertical braces, then hanging the liner and others, and then fitting the solar cover. This project might be a bit tasking but if you follow the guide correctly it’ll be finished before you know it.

Simple Steps On How To Install Above Ground Pool All By Yourself

blow up swimming pools

More advantages that you will get from installing an above ground swimming pool are:

  • Space-saving You can find various styles of above ground swimming pools which makes it easier for you to fit the available space in your outdoor living space.
  • Easy to maintain If inground swimming pools require a lot of components to get it work, you wont need to deal with complicated stuff when you choose above ground pool.
  • Easy to install Some above ground pools can be installed all by yourself without any needs to call a pro, just follow the manufacturers instructions, and you can have an enjoyable swimming pool in no time.

For you who are willing enough to install an above ground swimming pool all by yourself, below we share the tutorial on how to install above ground pool that you can simply follow.

Recommended Reading: How To Repair Inground Pool Liner

How To Install An Above Ground Pool In 10 Steps

03/ 22/ 2015

We have installed over 5,000 above ground pools over the years and we usually hear a few clients ask if they could do it themselves. The short answer to that is yes.

But, you do need the right equipement and the right instructions.

The manufacturers of the above grounds like Aqualeader and Zodiac do a great job at manufacturing them. But it would be a stretch to say that every model comes with instructions on how to assemble .

Our goal here is to give you a 10-step overview on how to install an above ground pool yourself.

Now before you get started on reading the steps, know that this is one of the ways to instal. Every builder adds their own style.

Attach Stabilizer Rails And Top Plates

Once the liner has been installed, begin working out all wrinkles from the sides of the pool.

The video explains how to attach the stabilizer rails and top plates to the top of the pool wall. The stabilizer rails simply slide into each other all the way around the pool, reinforcing its circular shape. The top plates are secured onto each upright with screws. You can now remove each landscaping stake, if used.

Quick Tip: Use a leveler to make sure the uprights are completely perpendicular to the ground. This will ensure maximum stability of your pool.

Don’t Miss: How Do You Get Iron Out Of Pool Water

Installing An Above Ground Pool On Sand In 5 Steps

  • The best solution is to dig down about ten centimetres and cover the surface with a ground cloth, which is used to protect the pool.
  • After clearing the ground of excess soil, rocks, roots and any other debris that could damage the base of the pool over time, you can fill the hole you have made with sand. Get yourself an aluminium rule, a spirit level, a rake and a tamper or a lawn roller.
  • If you choose a sand with a large grain size, it will tamp down more easily. A good option is to mix the sand with a bit of cement: this mixture will increase the strength of the base. Take the time to even and level out the base surface.
  • Add in a touch of water at the tamping or rolling stage.
  • Then place down a geotextile sheet to prevent weed growth. You can then roll out the ground cloth which should match the dimensions of the pool. Once this is done, you can start assembling or blowing up your pool.
  • Put Your Water To The Test

    Do-It-Yourself Round Above Ground Swimming Pool Installation – 1 of 2

    Skip this step, and stewing will take on a whole new meaning, apart from how you feel after a fight with your partner. While your pool is closed, itll be covered and largely safe from the elements, but rarely are winter covers foolproof. Plus, you wont be running your circulation system eight hours a day, or however long you should be running your pump. So what you do now will give your water a serious leg up throughout the winter.

    If your sanitizer and other chemicals are properly balanced, your pool is all the more protected from corrosion, extreme clouding up, and becoming an overall murky mess that will cost big to fix. Love that idea? Youll love this next step even more.

    Read Also: Does Costco Sell Swimming Pools

    Diy Above Ground Lounge Pool

    Here is an above-ground pool that can be used for indoor use, preferably a lounge. Youll be using a 1000L IBC and a few pallets. You will need some wood screws, PVC pipes, a pool pump with a sand filter, and a few other materials.

    For the tools, you need a circular saw, hacksaw or cordless reciprocating saw, cordless drill, a heat gun, and a few other tools you can have at home or get from your favorite hardware store.

    Great Aboveground Swimming Pool Ideas Cheap Inground

    Build a sand cover or. Common chemicals and tools you will need to put chemicals in pool for the first time include:

    17 ways to prettyup an aboveground pool above ground. Adjust the ph to between 7.4 and 7.6 before proceeding to the next steps.

    17 ways to prettyup an aboveground pool in 2020. Begin installing the wall into the bottom rails.

    17 ways to prettyup an aboveground pool in 2020 small. Broadcast shock directly into a concrete pool, but dilute shock in a bucket for vinyl pools.

    27 awesome pool fence ideas for privacy and protection. Brush the inner walls and surfaces of the pool at least once a week to prevent buildup.

    Amazing above ground pool deck designs tedxumkc. Fill pool to proper level.

    Backyard oceans 16 ft diameter x 42 in 35 ft high. First the sand should be compacted with a plate compactor, and then hand troweled to a smooth finish.

    Bestway power steel 16 x 48 frame swimming pool set with. How to put chemicals in pool for first time.

    Coleman above ground swimming pool above ground swimming. If the ph is higher than 7.6, use muriatic acid or a granular acid to reduce it.

    Diy above ground hook on pool tray using 34 pvc and a. If the ph is lower than 7.4, an alkaline product, such as granular soda ash , increases it.

    You May Like: How Many Btu’s Do I Need For Pool Heater

    Umbrella Policies For An Above

    Although not necessary, umbrella policies may help you get that added level of security and coverage that you and your above-ground swimming pool deserve. Umbrella insurance policies go beyond the scope of standalone insurance policies and provide extended insurance coverage at an added premium.

    If youve exhausted your current insurance policy, umbrella insurance policies might just be what you need. An umbrella policy often provides homeowners with $1 million or more in supplementary liability protection. If someone dies or is gravely hurt while using your pool, umbrella insurance would cover their burial or hospital expenses, as well as any legal bills incurred as a result of the occurrence.

    These expenses might potentially outweigh even the greatest liability limit coverage choice available on your conventional homeowners insurance. If you do not have umbrella insurance and your basic homeowners coverage is exhausted, you will be responsible for any further expenditures.

    Slowly Fill Pool With Water

    Setting Up Above Ground Swimming Pools

    Its recommended to fill the pool halfway then refer to the separate instructions on how to install the skimmer and return fittings. Once installed, you can finish connecting the rest of the pool equipment like the filter system and pump. After installing all the above ground equipment, you can fill the rest of the pool.

    You May Like: Salt Water Pool Calculator

    Dont Wait With The First Setup

    To tell the truth, there are actually multiple reasons to give yourself plenty of time for the task of installing an above-ground pool. For one thing, its an excellent idea to set it up early in the season to give the sun time to heat it up before summer starts in earnest this also gives you time to get used to maintaining the right water chemistry.

    On another level, even the best above-ground pools sometimes leak from day one. If you need to return yours, you dont want the warranty period to slip past with it still in its box.

    How big a factor this is depends on which kind of pool you buy. The pool liners of the Intex Metal Frame and Bestway Power Steel are typically covered for only 90 days. That of the more expensive Intex Prism series, by contrast, can be sent back at any time during the 12 months following purchase, assuming that the cause of the leak is a manufacturing defect.

    Above Ground Lap Pool Prices

    Some above ground lap pools are available for about $3,000 to $6,000 but higher quality, modular, above-ground lap pools range in price from $15,990 to $29,999. The range in cost relates to them having steel or polymer walls. Most above-ground lap pool kits are from 30 to 75 in length and are available for those who only want to use the pool for exercise purposes.

    Above Ground Lap Pool Prices

    Pool Size
    8 x 75 $7,500 $8,300

    Also, consider a swim-in-place pool which only uses one-third of the space and water needs. Even cheaper is to buy a pool that uses a tether rather than expensive jet streams to keep you back in the water. For example, Fitmax has exercise pools you can even install in your garage for $1,150 to $1,900.

    Read Also: Automatic Pool Vacuum For Intex Pools

    - Advertisment -

    Most Popular

    - Advertisment -